20" Camaro SS wheels! // BRAVADA Ep. 3
Vložit
- čas přidán 10. 09. 2024
- As we are well aware and you probably are too, the 1998+ Oldsmobile Bravada is undoubtedly the UGLIEST S-SERIES vehicle to ever be released
BUT it comes standard with all the most luxurious features of the S-chassis platform and we got one in black! So why not attempt to make it look cool too? These wheels are from a 2010 SS Chevrolet Camaro and they bolted on without using spacers or adapters(however we did have to file the center bore of the wheels) and the tires are almost new which is a major upgrade in itself from the dry rotted Good Year tires that was on the original wheels.
Enjoy as Lizard tackles the task of her first automotive upgrade!
Vist our website for the most S-Series stuff in one place: www.s10life.org/
Become an Official S10LIFE member by buying a membership plaque off our site here: www.s10life.or...
FACEBOOK Go post your truck or start a conversation at the link / 704544480691695
Join our Buy-Sale-Trade community: www.facebook.c...
We are the number one page on instagram for S-Series, go check out our page!: ...
Awesome I love it! I have a bunch of s10s
Thanks! What all you got?
I think I'm gonna have to put some IROC rims on my Jimmy
Yea I want the iroc z wheels to but hard to find here under 22”
Those don't come up for sale very often here either
Did your ride have 5x4.75 lug pattern I’m wanting to put the same camaro wheels on my Sonoma
Yes
The camero wheels will go straight on your Sonoma you might look into wheel spacers depending on if you have the right clearance which I don’t believe you will without running a small spacer. Just be mindful of your back spacing / offset of the wheels and the width so you get the clearance you need
Freaking love it ! 😀 chevy man all the way!
Right on!
That looks good. I also like the jeep Wrangler aluminum silver 17 on the Chevy s10
Do they also fit on the blazers and s10’s?? I know the Camaro wheels like these do but did not know they did.
They do with adapters if I remember correctly. Jeep wranglers are 5 x 4.5 and the S10 is 5 x 4.75
They do fit them if they’re 4x4, if they’re 2wd you have to have spacers
Day shot of it
Coming soon!
Was the bravado have 5x4.75 pattern like camaro I’m wanting to put the same camaro wheels on my 98 Sonoma
Yessir same bolt pattern
U didn’t need any spacers
Good I’ll get the tommrow and paint them black
Ok post a pic during daylight like see ur better
We didn't have to run any spacers on these wheels because this is a "4x4" sseries platform with has a wider wheel base. If your sonoma is 2wd you will need spacers to keep the wheels from rubbing your frame.
Actually ma’am they are the same size , the back ones are just wider (staggered)
The wheels are the same height, yes. But the tires on the back are taller than the front ones making them not the same size.
@@s10life oh I understand I’m sorry, did y’all use any spacers or anything. Also do you have an Instagram I can see more pictures of them please?
Hi I Have a 98 oldsmobile bravada it looks really great I thinking about doing the same thing
Hey that’s great we’re having a good time modifying this one
Check out our playlist of it
I started doing this to my 01 blazer 4x4. I had to open the center bore on the rims to fit on my blazer since Camaro is 66.9 and blazer is 70.3. Did you not do this?Also did you use factory lug nuts? Noticed Camaro are bigger compared to 12x1.5 on the blazer. Thanks.
Hey thanks for the informative comment! YES. I did have to bore out my center hole further. I also used the Bravada's factory lugnuts
@@s10life thanks for the reply. I’m almost done with my set to install. Take care
No problem! Holler anytime
Shouldve put that in the video? @@s10life
Yes 😍😍
😎
Its something bout a woman that aint scared to get dirty
Preach! 🤤
S10/blazer lights/grilles bolt right on that thing, would make it look a ton better
True but were on a mission to make the ugliest SSeries ever halfway decent
Why would anyone want to make it look like something that’s all over the roads even today the bravada is unique back then and today.
Alrighty I have 95 blazer and gonna possibly put a 2.5in lift kit on her and my buddy has z71 rims problem is gonna have to get 5lug to 6lug adapters for the rims did you have to cut or anything?
It depends on how tall the tires are on the z71 wheels! We didn’t do any cutting with this setup besides boring the pilot hole for the hub
@@s10life alrighty
What size is the tires?
What size size tires are those?
It would also look sick with some 15x10 wide wheels leveled
Yes it would. We've got a 2 inch lowering kit on the way. Gonna try a lowered style!
@@s10life yes kinda of like those slammed mini trucks but a slammed mini suv would look awesome 👌
We finally lowered it if you wanna check it out!
Do you know if they would fit on a 1995 blazer Thanks in advance
Yes they will fit but if you have a 2 wheel drive you will need spacers
@@s10life is it have a 2002 2wd blazer would i need spacers?
@@user-dq9ju8en1t yes
What year wheels and did u need spacers ?
These are 2010 wheels
No spacers
can you post another video on how tucked they are in the finder and in the video it dosnt look like you used adaptors did you??? everyone says you have to and its the only thing holding me back from doing the swap thanks love the video looks great!!!!!!!!!
THANK YOU! We are about to lower it all the way around. I'll get some footage of that for the next video to show you. NO SPACERS NEEDED as long as its a 4x4/AWD model
@@s10life yessir any ideas on lowering it i just want a 2/4 and im trying to stay away from the rough country lowering kit and yessir Mines a 03 4wd
@@derrickwells8502 we are going to use Belltech to lower this one. Already got the parts just waiting on a time to do it.
@@s10life hell yes blocks or full leaf
We are going with 2 inch drop blocks and 2-3 inch keys
I have a 09 TBLT I want to put these on but have the 6x127 bolt pattern. With 6 lugs.. will these fit?? (The Camaro is 5 lug.)
You would definitely have to have adapters to make it fit on yours IF you have enough clearance to use them
Really dude? Your answer to your question is in your question. Smfh
No spacers needed?
No spacers
Look nice how runing good people tell me the rim to big take more gasoline thas true whatt year camaró you got it thas nice you need spacers love h look got my S10 Chevrolet 1999 5 speed want to put 19 or 20 buy 15 big tires no like it to much got friend my got thad rims some body gife to him h dont now what car he f got it it no need spacer want to buy it put my my it 2 real drive 2 thank you put video look gorgeous
What’s the tire size?
We sold them now and are on 2nd gen trans am snowflakes
But I’m pretty sure they were 245/35 on front and 255/35 on rear
It's honestly not worth killing 80% of your vehicles functionality just for looks. Removing that front driveshaft is honestly pretty dumb considering how awesome these things are.
We wouldn't have removed the front driveshaft but the tires were different sizes. The driveshaft is going back in when the new tires go on.
The two tire sizes have the exact same circumference, they pulled the driveshaft for no reason the stock tire sizes are staggered on the Camaro but they are both 28.7” in height and have 704 revolutions per mile. Just one size is 9.6” wide and the other is 10.8” wide.
Hey guess what? It's their truck and they can do whatever they want to do to it Kemosabe. Lol
@@bryanomicioli3301Yeah I read in the comments that the tire size thickness was the same it's just the width is different so thought the same but it's good they were cautious tho.
I'll trade you my billet grill for your stock bravada one?
Gonna keep the stock Bravada grille, it's really growing on us!
@@s10life I don't blame you! I'm going to find one, I plan on doing a bravada conversion on my Sonoma, badges and all.
That would be cool! Keep us updated
@@s10life most definitely! I think I follow you on Instagram, I'll tag you..
got to make sure that the tires have the same rolling diameter otherwise you will blow up your transfer case
Yep, she took the front droveshaft out to prevent trouble
@@s10life depending on what awd case it has that may actually damage it more
Really? I hope not. We're looking to get all the same size wheels and tires to get it back AWD. The transfer case wasn't kicking in before these wheels so there will probably be more work to do when we put the shaft back in.
Got my S10 5 speed buy 20 good condition only thing don't know take more gasoline can f the from my S10 bro this look 🔥🔥🔥🔥🏆 moster that rim good jod
If you watched the video you would've seen her do that. Lol
The girls doing all the work and the guys just watching 😈😳👀🫶🏻🤣
It may come as a shock to most but some girls enjoy working on their vehicles