We’re ALMOST done our van build! | Transit Van Conversion

Sdílet
Vložit
  • čas přidán 29. 06. 2024
  • After nearly 6 months of converting our Ford Transit into a beautiful tiny home, did we FINALLY finish the conversion? We are thrilled with how the van is looking, and it's very hard to believe the build has turned out (almost) exactly as we've planned. We are still debating getting a heater for the van, but all else aside, this van is exactly what we dreamed up when we first picked up our Transit.
    We will of course be filming a van tour at some point, but we would much prefer to do that in a beautiful setting out west and not in suburbia or on the Ontario farmlands, so that will have to wait. If you have any questions about our van build, or van building in general, please drop it in the comments as we have been compiling the most commonly asked questions along the way to answer in a future video. Thanks to everyone who has supported us and our van build series. It's hard to believe that it's basically over, but the best part about all of this is that the van life adventure is JUST BEGINNING!
    Interested in some of our van life essentials? Visit our Amazon page (disclaimer: we receive a small commission if you purchase anything from this online store, thank you for the support!)
    www.amazon.ca/shop/richandkir...
    ________________
    We are a couple of full-time travel dreamers who decided to pack up our lives to explore the world - and then 2020 happened. After flying back home, we were not ready to give up our new lifestyle yet, so we bought a minivan, converted it into a DIY minivan camper, and drove across Canada in search of beautiful campsites and stunning mountains to climb. We are currently on a different sort of adventure, converting a Ford Transit cargo van into our new full-time home on wheels in hopes of exploring North America and conquering more mountains - and hopefully even the Arctic Ocean!
    Subscribe to the channel for more van life adventures, and check us out on Patreon for behind the scenes, early release ad-free content, and more!
    www.patreon.com/richandkirsten
    __________________
    Inquires: richandkirsten7@gmail.com

Komentáře • 16

  • @jazziered142
    @jazziered142 Před 3 lety

    You should look for videos on how to scribe for a perfect fit. It's pretty easy when you see it.

  • @amyfu2047
    @amyfu2047 Před 3 lety +1

    Looks great guys! I ran my electrical wires today. Hoping tofinish my subfloor and framing the walls tomorrow. Decided to switch to 2x4 instead of 1x3 for furring strips. Couple weird parts of my van walls stick out and the bigger 2x4 will make it easier to put on walls smoothly. I need to connect my wires to the battery for my dc to dc charger. That way I don’t have to worry about trying to hide them after the fact. I look forward to watching you get out and adventure!!

    • @RichandKirsten
      @RichandKirsten  Před 3 lety

      Hi Amy! Hope the weather is warmer for you up north now that spring is on the way! What dc charger did you get?

    • @amyfu2047
      @amyfu2047 Před 3 lety

      @@RichandKirsten i got a renogy 50amp combination mppt controller and dc-dc charger. I figured I could kill two birds with one stone. It was gorgeous today and I got a good full day of building in!

  • @jamescarroll0615
    @jamescarroll0615 Před 3 lety

    If magnets don't work maybe a sideways slide or industrial velcro at the corners.

    • @RichandKirsten
      @RichandKirsten  Před 3 lety +1

      We have some industrial Velcro left over... hmm

  • @SorgiStories
    @SorgiStories Před 3 lety

    4:15 The look on your face seems like the smell of glue was just wafting. And yes, you are wonderfully professional can builders.

    • @RichandKirsten
      @RichandKirsten  Před 3 lety +1

      Thanks guys! Hope all is well for you and the family!

  • @tames7880
    @tames7880 Před 3 lety

    Wow! Great work ❤️

  • @kapanchal
    @kapanchal Před 3 lety

    Excellent progress. M excited. What would be the additional weight added to the original van?

    • @RichandKirsten
      @RichandKirsten  Před 3 lety +1

      We’re not sure yet - going to be weighing it when it’s all finished!

  • @DjPaceOfficial
    @DjPaceOfficial Před 3 lety

    Hello,
    I would like to purchase the high school cardboard school project NFT. This would look great in my collection. Looking forward to your response.
    Regards,
    DJ Pace

  • @henrijakubowicz1421
    @henrijakubowicz1421 Před 3 lety +2

    I think that your dowels are a litle to low.

    • @RichandKirsten
      @RichandKirsten  Před 3 lety

      I hope not... we already put the holes in our cabinet frame 😭