Mercruiser Mercarb with TKS (turn key start) rebuild
Vložit
- čas přidán 5. 09. 2024
- This video is the disassemble, cleaning, and reassemble of a late model Mercarb from a 4.3 mercruiser. The cleaning was done using a heated ultrasonic cleaner. Dont forget to like, comment, and subscribe.
This was very good..... Been 45 years since I rebuilt one of these... Great refresher.
Perfect video for me thanks. Not many on the TKS carb.
This video is great man thank you sir!
Should've replaced the fuel filter
CRKT knife nice I love those blades, thanks for the video my boat is getting its carb redone right now.
good job i have same ,but
I do not get 12 v to the solenoid any suggestions?thanks
hey Charlie, see that Amsoil….. good stuff
Willie Knox it's all I use man. I love it.
Man it sure would have been nice to watch the video with out the fan noise going on!
Rodney Chastain sorry that bothered you. Somewhere close to 112 in the shop when this video was made. I deal with the heat, you deal with the noise. Or don't watch my videos.
Charlie The Wrench ok good enough didnt watch the whole video anyway because really it sucked! And so does your attitude!
Hi there, I'm using the same carb, but I don't know the rebuild parks number , can you tell me?
What rebuild kit did you use. I have the same carb, but am struggling to find the right rebuild kit.
It was a kit from boats.net
@@HamiltonLandWorksLLC , am i looking for the number that is stamped on my carb? The stamp on mine is 8m2003946.
I know this is an old vid but I can’t find a specific tks 3.0 carb rebuild kit. Did you use a standard 3.0 rebuild kit?
Boats.net would be my first place to look, then ebay. If you can't find one there check in with any local shops that only deal with older boats. The shop I worked at had a surplus of old kits. I'm no longer there and can't speak for parts availability. I also can't say that a standard kit would work. Subtle changes are made to marine components to meet uscg standards and to not allow automotive comments to work. Carbs, alternators, and starters are usually the first things you'll notice are different from auto to marine.
What rebuild kit did you sue having a heck of a time finding 1
So what is the problem did you fix?
What is the spray you are using when re-installing the jets?
Amsoil MP. WD-40 will work as well.
It keeps the jets from sticking if you have to rebuild it again.
Hey Charlie. Thanks for doing this video, one of the few ever done! After doing all of this, are there adjustments to be made once back in the boat?
I have a 2006 4.3l TKS and it has a rough idle, probably something going on in the idle circuit. Boat runs awesome outside of idle.
You shouldn't have to change any thing, pending that the engine ran done with the current settings before the issue started.
So loud