I recently purchased an old resin kit and I've been worried about the old J-bot decals being rather thin and this is the exact product I've been looking for.. Thank you friend :)
So when using this, you're not using water to remove the decal? I've got a sheet of old decals for a 1/43 Corvette that are breaking apart in water as well. I would have assumed you use this then put in water as normal but is this not the case?
Once you apply the Micro Sol liquid, you let it dry. After that you use the decals as always. With water. The only difference is that you must cut tight around the decal so that you avoid the excess film.
Πάντα αναρωτιομουν γτ είναι δύο αυτά τα μπουκάλια, τώρα ξέρω τουλάχιστον τι κάνει το ένα. Ωραίος. Κ ακόμα πιο ωραίος, γτ το BBQ στην Ελλάδα είναι προτεραιότητα.😉😉😊
My friend you are doing it all wrong. cut a decal out of paper and let it soak in water for just a few seconds and the decal will start to lift off paper. Put some of the SET on the area you want to place decal. Now with tweezers move it over onto the spot. Lightly brush the bubbles and liquid out from under the decal. You are done.
@@ScaleModellingHellas to bad this old guy cant email you some pictures of Panerai dials I have done for repairs. Decaling with clear waterslides on inkjets work great.
Thank You! I only learned about this product a few minutes ago and your video might help me out!
Thanks for the video, great product.
i have even spray it on decal sheet using the decal liquid mix with with Isopropol Alcohol/ IPA as thinner 10-20 %
I recently purchased an old resin kit and I've been worried about the old J-bot decals being rather thin and this is the exact product I've been looking for.. Thank you friend :)
Ότι χρειαζομουν. Ωραίος! 👍
Nice review Thanks😊
This film will keep the old decals from denigrating once in the water?
Yes. The decals were breaking in many pieces once i rinsed them in the water. But the application of this liquid saved the rest of them.
@@ScaleModellingHellas Thank you for the reply .I will have to get it now .Too many to lose to time and money .
So when using this, you're not using water to remove the decal? I've got a sheet of old decals for a 1/43 Corvette that are breaking apart in water as well. I would have assumed you use this then put in water as normal but is this not the case?
Once you apply the Micro Sol liquid, you let it dry. After that you use the decals as always. With water. The only difference is that you must cut tight around the decal so that you avoid the excess film.
Πάντα αναρωτιομουν γτ είναι δύο αυτά τα μπουκάλια, τώρα ξέρω τουλάχιστον τι κάνει το ένα. Ωραίος. Κ ακόμα πιο ωραίος, γτ το BBQ στην Ελλάδα είναι προτεραιότητα.😉😉😊
Αν εννοεις το άλλο μπουκαλάκι το SOL είναι για να μαλακώνει τις χαλκομανίες ώστε να ακολουθοπύν την επιφάνεια πανω στην οποία μπαίνουν.
@@ScaleModellingHellas ναι αυτό εννοώ. Σκεφτόμουν να τα πάρω κ να τα δοκιμάσω ο ίδιος αλλά τελικά τσιμπίδα το mark fit strong από tamiya.
my decals will not adhere to the model.. waht is that you used tthat you brushed on the model?is it an adhesive?
I am using Mr. MARK SETTER NEO by Gunze to make decals stick better.
Hi ... what do you use to clean your brush after using the "Liquid Decal Film" ?
i used alcohol and than washed it with dish wash soap. It looks fine.
@@ScaleModellingHellas Denatured Alcohol???
@@mikepaling4736 The alcohol that we use every day at home.
@@ScaleModellingHellas My Brandy😭
Μπορούμε να ρίξουμε 2κ βερνίκι μετά εφόσον στεγνώσουν??
Θοδωρή δεν το έχω δοκιμάσει, οπότε μη σου πω κάτι που δεν ισχύει. Αν κάποιος φίλος γνωρίζει ας μας πει. 2κ είναι βερνίκι αυτοκινήτων;
Hello can i apply this with an aerographe ?
I haven't tried it with an airbrush David.
Ok thanks i just do it and it works 👍
My friend you are doing it all wrong. cut a decal out of paper and let it soak in water for just a few seconds and the decal will start to lift off paper. Put some of the SET on the area you want to place decal. Now with tweezers move it over onto the spot. Lightly brush the bubbles and liquid out from under the decal. You are done.
Believe me, the minute i tried to move it, it was breaking in parts.
@@ScaleModellingHellas to bad this old guy cant email you some pictures of Panerai dials I have done for repairs. Decaling with clear waterslides on inkjets work great.