Highlifter Outlaw Max Tire Review! These Things Are INSANE! Are They The Next Best Mud Tire?
Vložit
- čas přidán 7. 04. 2024
- Like, Comment, Share, and Subscribe!!
This week on Let Dirt Fly, we check out the all new Highlighter Outlaw Max Tires! For our testing, we are using a 30" set mounted on our 2019 Can-Am Outlander 650XMR KillaBee! Could these be the next best mud tire?
Save money on the products we us! Use our discount codes below:
- Perfex Industries 10% Savings : Letdirtfly10
- TowCord Timmy 10% Savings : LetDirtFly
- Dooplicator 10% Savings : LETDIRTFLY
- Fodsports 12% Savings: LETDIRTFLY
- Kong Motorsport 15% Savings : #LDF
Follow Us On:
Instagram - letdirtfly...
Facebook - / letdirtfly
Subscribe to our friends!
@ADVENTURESThisWay
@AmotorB
@j-muddy93
@theben4x4
@ScootersGarageYT
@XMR_Mudding_420
@loudnproudatv3502
Sponsors, Affiliates and Supporters:
- Perfex
- Quad Logic
- DP Brakes
- Kong Motorsport
- FodSports
- Novawinch
- Dooplicator!
- Towcord Timmy - Auta a dopravní prostředky
Like em more than outlaw 3s? Thats whatd id be upgrading from only thing im worried about is they seem so heavy
Yes! 41lbs! The same weight as xm310. That's the information I've been looking for. Thanks a bunch guys!
"that's what Assassinators are built for"
I been riding on them for maybe 3 months now. Woth cvtech , secondary spring, and pc5. They pull good. I agree they do something weird with the steering also.
Ok so just a thought. What would be better for smaller four wheelers like the 650. Doing like a 2-3’ lift on 28-30s or going with 30-32s on a stock lift? U can turn the smaller tires better but don’t have the ground clearance but you gain some clearance back with a lift. But with the bigger tires you can’t turn them as good but have more clearance
Tires with clutch work. We have a mudding 101 video that talks about this stuff.
What's up with the renegade? Any updates?
Hope the next video will be out Friday.
What is your clutch setup with the yellow machine? Also is the ecu flashed? Or do you have exhaust and fuel tune?
It’s got a cvtech with shiftout setup for 8300 in low. It has a tune from Mr.RPM as well with rev limiter raised to allow for the higher shiftout and fuel corrections for the exhaust
@@LetDirtFly spring and weights in cvtech?
1017 spring. Weights are to be determined by your tire weight. Every machine will be slightly different.
@@LetDirtFly I have a 1017 spring on the way with some 12g weights. I’m running 30” terminators. Squared up. Also getting an ecu flash.
What is all done to the 650 other than a clutch and exhaust?
Tune and tires.
Just a tune and our own clutch tuning. And some good tires lol
@@LetDirtFly what’s done to the clutch tuning?
Just a 1017 spring, white epi secondary spring and got the weight set just right for the tires
Do you guys have stickers
Have to make another batch up.
alot of water lol. and well boy's i might be headless its like 350 then shipping for one if the guy i sent it to cant get them out and something put on it for stud's. got to love older bike's. least it gives u something to get out on when they work hahahah
I made it in the video 😂 wooooo hoooo
Should make a video of the terminators they did really well considering they were only 28s
@@dgreco1374i'm running a set of 32" terms on my 850 XMR. They chew
and gasket's are still mia with the shipping company.
Send us a message on facebook or instagram. Maybe we can help.
3 beadlock bolts missing at 1:02
Yes sir, that’s how the wheels and tires came when they came on the Worst Renegade on Facebook Marketplace. Check out the series.
@LetDirtFly I watched a couple, they're really good! I kinda want a project, but I kinda don't lol
oh and thats a used head. i found 1 place in the states i can get a new one for 1300 lol
The middle of that swamp will swallow you
Oh it did 😂 Seth buried marshals 850 😂 had to help winch him out
Yah we found a good spot you’ll see in our other video from Stuck In The Muck 😂