Fast Way to Replace or Retrofit a Two Handle Shower System with One Handle
Vložit
- čas přidán 30. 06. 2024
- Sometimes you may not have access from behind the shower for repairs, and the only option is to work from the inside. In this video I'll share how to do and give out some pointers.
🧰 Tools Used:
• Klein - 10-in-1 Screwdriver Phillips and Flat Head: amzn.to/46qe8b7
• Milwaukee FASTBACK Compact Knife amzn.to/49actYY
• Channellock - 9" Channel Locks: amzn.to/40SfZEy
• All Purpose Canvas Drop Cloth: amzn.to/3SA99Rw
• Metabo HPT Angle Grinder 4-1/2-Inch: amzn.to/4bdmUNd
• 4-1/2" Diamond Blade, Continuous Rim, General Purpose: amzn.to/49eGJ4O
• Claw Hammer With fiberglass Handle - 16-oz: amzn.to/48PUgQx
• BLUEFIRE Trigger Start Gas Welding Torch Head with Propane Kit: amzn.to/3Oj7QDZ
• 1/2-Inch AutoCut Copper Tubing Cutter, Black, Orange: amzn.to/4beWPxi
• ZUZUAN 12-Inch Heavy Duty Flat Chisel with Hand Protection: amzn.to/4baatSp
• Crescent Wiss 9-3/4" MetalMaster Compound Action Straight and Left Aviation Snips: amzn.to/3HDPIkk
🔩 Materials Used:
• DELTA FAUCET Cover Plate RP29827, 13 x 8.12 x 0.38 inches, Chrome: amzn.to/3OksbbO
• Delta Faucet Classic Bathtub Faucet Set, Shower Faucet Set: amzn.to/49fOOpR
• Oatey - Plumbing Solder Kit: amzn.to/47HqdJP
Disclaimer: The DIY Plumbing Guy videos are created for informational and entertainment purposes. Viewers engaging in DIY projects do so at their own risk, and DIY Plumbing Guy is not responsible for any resulting damage. In case of complex plumbing issues, it is recommended to contact a professional plumber in your local area. Additionally, please be aware that the content may include affiliate links, and the DIY Plumbing Guy may earn a commission from any purchases made through those links. It is the viewer's responsibility to comply with laws, safety regulations, and to make informed decisions when using affiliate links. - Jak na to + styl
The way you use the channel lock to turn the pipe cutter in a tight spot is a great idea! I'll have to remember that.
Yes! Sometimes we have to get creative. These little tips are longtime favorites… thanks for watching.
Great job. Thanks for all the tips and tricks as well the tools used 👍🏻 Very helpful for me. Have an awesome day.
I’m glad you enjoyed! Thank you for watching.
Dude if you continue with the great camera angles you should be golden. Diy videos is all about angles and clarity. You got a subscriber in me
Thank you for that!!!…. I will try to get better after every new video. Thanks again.
Another great video buddy! I'm sure I can use this advice in the near future.
I’m glad you enjoyed… thanks for being a long time viewer!!
Very informative and helpful. Thank you.
I’m super glad you enjoyed!!!
Excellent, thank you!
Awesome!
Do you have a video that shows how to replace the 3 piece handle system with another 3 piece handles set??
Nice work. But please use a guard on that grinder. In a split-second, that blade can do major damage to your hand, etc.
Great tip! For sure safety first, thanks for watching out.
Very nice brother, but is it crooked or just the camera angle?
It did came off center. Next time I’ll try to get really center. Good catch!!!
@@DIYPlumbingGuy Dang, I hope you didn't charge for that 🤣
Sir what is the big round piece in the middle called
DELTA FAUCET Cover Plate RP29827, 13 x 8.12 x 0.38 inches, Chrome: amzn.to/3OksbbO
One suggestion: bleed the lines and valve without cartridge in it so sediments, flux, and solder don't clog cartridge
Good call, yes, sometimes we go too fast and forget these little details that can cause headaches later on… thanks for the suggestion.