I have a time cutter that is about 8 yrs old. It still runs great. I did have to replace the, belt, fuel pump (cheap), tires, blades just from normal wear. I also replaced the 3 belt pulleys which were not expensive and very easy to replace. I love this mower because it is easy to repair, does great job. Paid around $2500.00. All my neighbors had a $10 thousand dollar mower and my mower does just as good cut in the same time. Really good product. It had a 5 star rating when I bought it, and I would of gave it a 5 also. Only issue I would like to have seen was bigger tires and a seat that had more suspension. But I see the new one has both.
I own a Toro Timecutter. It is a 2020 model. have changed a brake module and a starter relay. It's running good. The motor is Briggs and Stratton comercial 22.5 hp.😊
Great mower, have my 2022 model for 3 months now and I Love it! I cut about 3 acres and a couple miles of trails. Almost bought an eX-Mark Quest 54 until I did the research. Toro owns eX-Mark and this Toro Timecutter is virtually the same mower as the Quest except you get the MyRide and the deck wash hose connectors on the Timecutter for over $1,000 cheaper. I got my Timecutter 75756 for around $3,500 after discounts and rewards so I saved even more. Best mower I have ever owned!
Bought mine spring 2023 and paid $4,200 out the door, this mower stands next to mid range Scags and other higher end mowers hands down. Mow quality is extremely good, and the striping is wonderful.
I feel very lucky that my first ZT was a Toro MyRide 50 Inch. I did a ton of research before settling on this one. My neighbor was so impressed by my Toro that he went out and bought one. He got the Kawasaki engine. Nice Review!!
I’ve been in some heavy stuff and this mower has plenty of power to plow through everything. I’m pretty darn satisfied with the overall experience of mine.
I like this video because there is no fancy words or salesman presentation going on. I just bought one and I like everything about it. Thanks for your observation and honest opinion.
I completely agree with your review. I have the 50” Timecutter with the Kawasaki engine. Runs smoothly and cuts evenly. I don’t have the my ride seating but it is very comfortable. I looked at Cub Cadet, Bad Boy, Ariens and John Deere. I’m glad I picked Toro. My first rider was a Toro back in 1972. Tuff as nails. Still built like nothing else.
Great re-review Randy. Most tubers don't ever get back after some time on the machine. But YOU did buddy! Good on you for being honest on all your review videos. That speaks volumes.
I try my best Sam. I try to be thorough and honest. They can compensate me to do reviews, but I don’t make enough on here to be dishonest. Thanks for the comment!
Thank you for the description of the oil drain tube sticking in place. I went out to the barn and corrected it on my brand new mower, it was tight. I got it just in time. Thanks again.
I have this same model. I bought it last year. Super happy and I looked on-line for any issues before I bought mine. 1: If you cut a high lawn when it's wet you will have issues with clumping. Top end home machine or professional lawn service. We all know better. 2: The belt guards on the deck pullies do fall of. Bad design. Nice try and most of the maintenance items are easily accessible. Better than most small engine designs. 3: This guy Ty-Wrapped his discharge chute. I don't recommend it but if you mow wet, it will add to grass clumping if not raised. I have a small rope on mine to lift the guard to get into my back yard. 4: The oil drain tube is an issue. Put a lubricant on the oil drain hose as soon as you buy it. It will stick to the point of breaking something. 5: I am very impressed with the ease of operation that Toro added to these zero-turn mowers. They are customer conscience and did a great job of making maintenance easy. 6: the grass chute. It was a soft flexible rubber 2 years ago at most and they should have kept it. 7: Toro actually designed and makes that engine. It was a gas pig the 1st few weeks but now as expected.
I expect this mower will last several seasons with decent care. czcams.com/users/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.
I killed my XT1 42" CC on an acre after 3yrs, saw the Toros at HD and I think thaysbwhatvibneed to step up to. Is the Kawasaki motor better than the Toro branded one?
I just custom made a flat blade cover for my Myride 54. Scrap piece of metal,angle grinder, drill and half hour labor. Bolts up to holes for factory shroud
4:00 Just purchased the 75754 today and saw that Toro fixed the belt guard issue. There is a screw that the guard fits into and a cotter pin that hold it down. 👍
Good to hear your still liking your Toro. And as always, great vid! Have over 100 hours on mine and can't find much to complain about. Grass shroud torn=check. Syncro covers come off way too easy=check (mine have cuts in them from the belts). Oil tube fused each oil change=check. Ha ha! Minor things compared to how I feel after a mow. Man my Kubota used to beat me up! Gonna pass this one on when I sell the property and pick up one with a smaller deck. Happy mower over here!
Actually...... you can clearly see the 2 adjustment screws 1/2 way down the handle that allow you to adjust the handles on that mower🥴👍 Here we are 2yrs later... Toro Timecutter still runs great... now have 2 neighbors that bought the same thing ... all very happy... all of us have 1+ acre properties
Just bought a 75750 timecutter w Kawasaki 23hp. No my ride, don't need it. The deck and cut quality is top notch. I cut on the medium setting. 7mph on bumps is s handful. Wife uses slow mode.
The different speeds really helps people learn to drive one while being productive better. I have enjoyed mine the entire 2020! I hope you enjoy yours just as much Bradley!
I drilled a couple of 1/2 holes in the plastic covers that go over the spindle pulleys on the deck. Then i put an air hose in there and blow it out when I'm cleaning off the machine. That way I can clean it without having to take the covers off. Works good.
I work at Lowe's and we had a returned one that seemed to checkout fine when inspected. Its the my ride 54" and I got it for $2300. Delivery is in a few days so im checking out videos
Thank you for your honest opinion from somebody that rides on a mere dawn on everyday I really appreciate that I'm getting ready to buy me a 0 turn here shortly and I've been watching a lot of videos is out of videos on all the different brands
we have a cub cadet Zforce 60 " and I am thinking of getting a Toro 50 inch to fit in some tighter spots ... thanks for the great video. I share a lot of your cutting techniques. Cross cutting is only for people that really like lawns.
FYI, I was a bit concerned about the Chinese Toro motors when doing my pre purchase research, I didn't read about any real issues just that it can be hard to find parts outside of toro dealers. But I found out that there are models online that usually don't show up to the brick and mortar stores which have real engine options, I bought one with a Kohler 7000 series.
I just performed the 5 hour oil change on my mower. Even after watching this video, taking care and wiggling and twisting, I still couldn't take the oil drain hose off without breaking the plastic plug. Very frustrating. I spent 50 minutes having to chat online with TORO because there is NOBODY to speak to live. Very frustrating. I wanted to know what they are doing regarding this well known issue and all I was told was take it back to my dealer for them to look at it. But, I bought mine at Tractor Supply. They're not considered dealers. So I called the nearest dealer, 20 miles away, who told me that there was NO GUARANTEE that TORO would cover the cost of a new shroud. And that they had not heard any feedback from TORO that there is an issue. AND WHEN YOU DO AN OIL CHANGE, DON'T BOTHER LOOKING IN THE MANUAL FOR A FILTER PART NUMBER, ITS NOT THERE!
I had a terrible time and horribly failed whenever dealing with customer support. I won't buy another toro for just that reason. No help from dealer or Toro.
I had been set on getting the cub zt1 until I saw your videos on those. I stopped in a local dealer back in June after watching the initial review video of this mower and they had a 2019 model on clearance. Of course there are differences, but certainly not in quality. I absolutely love the myride system and the cut finish takes my yard to the next level. The neighbors have all complimented the look of my lawn since buying the 50" myride and laying down the stripes for that professional look.
we have a cub cadet Z460 and I am thinking of getting a Toro 50 inch to fit in some tighter spots ... thanks for the great video. I share a lot of your cutting techniques.
I have a54” Toro the battery last less 6 months. Now I am having problems with safety switch, on the handles, the sit, it clicks but not turn on. I bought mine at Tractor Supply 2 ago and the people’s there have very little knowledge about troubleshooting❗️
Damn 3 years and many people get new ones. I run mine till the cant go no more 😂 last one was 7 years and it was meant for a 1.5 acre and i mowed my 4 acres every time with it 😂. Now im looking to get one of these so it can last at least 10 years lol
This one has all the right parts to last well over 3 years! Some people do get a new mower every year. I don't know if its because they made a mistake on their last purchase or they just have to have the newest best thing. Gotta keep up with the Joneses, but why try to flex with mowers? LOL.
I just bought the 50" model and love it. The 50" is identical except for the additional 4" of cutting, same engine, frame etc. Unfortunately toro still has the same oil tube issue. I haven't broken the plastic "plug" yet but I won't be surprised if/when it happens.
I think i'm gonna buy one of these mowers soon , my old 2007 rtz50 cub cadet has 750 hours on it and its tired ... i want the 60inch toro but my bank account says' Nah , you need to look at that 54 inch instead" LOL
2019, I ran a 60", 2020 I ran this 54". Don't laugh,,,,, 6" gets the work done noticeably quicker. The good thing about this Toro 54 is, the motor is the same that they put on larger mowers, so it's "over powered" letting you cut thicker grass without bogging down as you would with the 60" of the same model. You're doing fine with the 54". I didn't want to sell my last Cub zero turn tractor. It was 12 years old and I didn't know how it was still standing, but it started every time and mowed grass, I always had the feeling it was going to be its last mow. 4 years later, it's still running! I know the guy I sold it to. Sometimes you get lucky I guess lol.
Saw another vid on this machine. I think that the exposed blade on the chute is made that way to assist in the discharge of grass when the bagging unit is in place.
The exposed blade makes this mower great for tall thick wet grass. No clogs, shoots that grass far. But it is kind of spooky having that blade exposed.
I never could see the fascination with stripes, as long as it cuts even is all I'm concerned about. I was never a Toro fan but I bought an older timecutter and have enjoyed using it.
we have a Z5060 that we bought in 2010 - in 2016 I had to replace the LH transaxle @ a cost of $1400+...now the RH side is toast & it's $1580 just for the part...it seems to get "serviceable transaxles" one has to spend a helluva lot more
Parking brake control module gets water in it easily when you wash your mower. This causes an intermittent short in the electrical system resulting in malfunctioning safety switches and no starting. $150 part (2022). 1 year old mower warranty claim denied due to water in the part. I believe the part should be waterproof on an "outdoor " product. If you do not wash your machine then other parts can malfunction (belts, pulleys, etc). I have a problem spending $150+ every time I wash my machine. Good thing I am lazy and just washed it once with a regular hose sprayer. Otherwise great mower, great ride.
Thanks for the great review. Was really wondering about the My Ride and how well it really worked. I have a Bad Boy right now, been a great mower but rides like a lumber wagon. Considering getting one of these.
I love mine. I have the 42 stamped deck and no my ride. I run it commercially for now and it never has cuffing or drive issues. ONE ISSUES THOUGH-- and toro will not fix it. Do NoT stop on your turf while its running. Unlike most zeros, the exhaust for the timecutter points striaght down into the grass and not up amd away like its supposed it. Toros recommendation is to drive to the street and stop. Not an option when your doing acre size back yards.
I wouldn’t necessarily put that on Toro. That is an engine manufacturer problem, although, Toro absolutely could request a redesign of the exhaust. On some of my other brand of mowers reviews, people often talk about how the mower is junk because the drive motors fail. What they don’t realize is they are 90% ALL the same brand motors in all mowers! 🤣. Thanks for the comment ,,,,,,, and now that I’m getting ready to insert your name here, I’m definitely going to have to check out your channel!! Do you make rods?!
@@g4outdoors Its a family channel but my rods are on there. Older ones. I havent done videos on my customs in a while but i do still make them. You can check out Www.ZiggyBsportfishing.Com and mostly all the rods used are my customs. Boat has been laid up for 2 years now due to a complete rebuild.
I bought the 42mx time cutter in 2019. Have had multiple problems with. It has been in the shop several times. Lest say most of the mowing season. Toro doesn't want to know anything. They drag there feet before authorizing repairs, with one of there dealers. I could go on with a list of dates and what the problems where.
I actually like the cut out at the discharge on the deck the grass doesn't gum up and plug up the deck like on other mowers with that cut out like it is I understand the danger but I would rather have it like that then have to reach and grab the grass out of there whenever it does get clogged up on wet tall grass
GOOD REVIEW, I watched your first video and bought one of these last week. A couple complaints I have is with the PTO on the machine is very loud. Reminds me of being in an old Cessna airplane. I had to get my shooting muffs out to reduce the noise. The deck assist adjustment is not usable for my while mowing. I have a 34 in inseam and am not able to use the deck assist while mowing without contorting my right leg. You had said on your first video that the mower cut 100%, I did not find that to be true. My mower leaves stragglers in the same line, off and on.
I literally just paid for mine 10 minutes ago Thanks to your honest review and videos also all of the questions that I had you promptly responded I hope that Toro will be rewarding you because of you many more of us are buying Toro products I’ll keep you posted if any issue Again thank you for your time and responses By the way; at the end of this video did you just crash into the bushes lol 😆?
Thanks for the great review. I'm heading out tomarrow morning to make the purchase. Your video answered many questions and I'm feeling much more confident in the investment.
My ss5000 timecutter has always, making turnarounds, tires tear up the grass to the dirt! And inclines back tires will drag for some reason and rip the grass up! Makes me 🤬. Then the idler pulleys that you can’t grease, 2 yrs all you get out of them before the bearings burn up! Kawasaki motor is great. Had to replace every switch on the dang thing, plungers on handles, starter switch, trans actuator switch ($90!), seat safety switch etc… every stinking year something goes bad!
Great reviews all around. I’m definitely thinking about buying one of these machines. I recently picked up a Toro Recycler AWD walk behind mower and it is the nicest mower I have ever had. Definitely impressed with Toro.
I think I narrowed it down to the following ztr. Ariens xd52, Gravley ztx 52 which seems to be the same as the Ariens with slight differents and 200 more and Toro timecutter 50" without myride. Was looking at Hustler as well. Guess my main question is what is the life expectancy of the 2200 hydros? I have a 1acre lot, will I get 10 or more years out of these? Most of the dealers are really pushing the 2800 hydros. I keep thinking to myself. I have had a 2002 riding mower since new. Never had any issues with hydros. Is 2200 hydros fine or do I really need to spend the $1,000 more and get the 2800 hydros.
Great questions Travis! For real. You have actually picked some of the top brands and took into consideration one of the biggest components of the mowers. First of all. Ariens is Gravely. Same company, same manufacturing, different colors. I’m assuming you know all of these Hydrogears on all of the mowers are the exact same brand as well. SO, the 2200’s are an entry level hydro. You are really rolling the dice on how long these will last. Sure you can get some to last 10+ years. I’ve had one last me 12 years and I sold it as a working mower. Then I’ve seen them crap out in less that a year. When you step up into the 2800’s and 3200’s, you’re getting a higher pressure unit. You are still rolling the dice with these hydros as well though, but the dice are a little weighted. You will get better life out of a bigger hydro just because they aren’t going to be working as hard. If you feel comfortable with the 2200’s, I would then take into consideration “dealer support”. With most of the mowers having a 3 year warranty, you want an honest dealer that is going to take care of you and not say that you ran it too hard or abused it, or something stupid like that to get out of having to do warranty work. In my OPINION, a 2200 will do just fine with one acre, a 2800 will do better and you will be more happy with the performance, especially if you have a lot of obstacles and hills. Flat ground? The 2200 will be just fine. I know there is still a lot of concerns that you might have. If at all possible, find a dealer that will let you run around the lot on a couple of machines and feel for yourself what you will like better. Most local mower dealers have demo units on the lot. I hope that helps some Travis! Best of luck to ya!!
Tied between the Husqvarna 50's and Toro 50's. Kawasaki or Toro engine doesn't matter. They are both commercial grade in my opinion. I'll never buy anything with a Kohler engine again! Was looking at Cub Cadets before watching this video and really they are alright they just aren't something I would recommend for someone going into the lawncare business.
Thanks for the review! I just picked up the 50" yesterday. Any updates on a cover for the discharge? I am going to install the recycler kit and even though that hides the blades, I'd still like a cover for it so I can take the flap off.
I got the recycler kit for mine. I've found that the blades the kit comes with have no lift at all and seems to lay the grass over. I tried more aggressive blades but it was too much for the mower and bogged it down unless going very slow. It does make the yard look great but I cut 2 acres and don't have the patience to go that slow haha
I bought mine less than year I have had belt problems blades ,I had to replace in less 3 months,now safty switch problems,just put new brake module,and still having problems with mower
I myself I want the Toro time cutter but I only can afford the 42" but I would like to have an iron deck on it and a high back comfortable seat like the one I seen in your review and the toro 22.5 HP commercial engine if I can get the my ride I'll get it but if I can deal with out it I'm fine but in order to get half of what I want it comes with a different engine and the seat that I don't want
I’ve seen Lawncare companies mow for years with the smaller Toros! I wouldn’t be afraid to get the 42. I wouldn’t want it, but I wouldn’t be afraid. Lol.
Randy, great review. I have the same mower without the my ride. I love it!!! Awesome cut and a quality machine. Silly question but i mow at 4" also and was wondering where you have your anti scalp wheels set
If you mow at 4”, the anti scalp wheels are no bother to you. They are only there for larger angulations of the ground and to keep the deck and blades from scalping. If you were normally mowing at 2”, I would entertain the idea of giving a more in-depth response.
@@g4outdoors Thank you for the quick response. My property is very uneven in many areas. There are 4 predrilled holes to choose from for the wheels and I was just wondering if you had a recommendation on where to set them.
I bought my toro zero turned 60 inches brand new The first year, very hard to take the blades out because somehow the bolts got too tight. The same first year, the cutting belt came lose. Took it back to the dealer, they tried to Jack me with the cost of fixing which still under the warranty. Got them fix them free. The issues still persist. Brand new 60 inches zero turn with suspension 10000$. Toro is ain’t my thing no more. This year, looking to buy a second one as I have about 10 acres of grass to cut. NO TORO…,
I have this mower with the Kawasaki engine and 50" deck. No problems except one, I can 't stop on my lawnmower for more that 10 seconds in one spot or I will burn my lawn. I spoke with the dealer and they talked to Toro and said I need to make sure I am running my engine at full throttle to keep the hydro fans running as fast as possible in order to keep the heat dissipated off the units. I have also looked at my muffler discharge and it does not appear to blow down on the ground where the spots appear. Anybody else have this problem? Any solutions?
Interesting. I have not seen this, but have heard of it. I also checked the muffler discharge and it discharges side ways and has a metal baffle beneath it. Is Toro saying the hydros are causing the burning issue? I have not seen it, but I just got my ZT about 2 weeks ago.
The engine is made by the Loncin Motor Company in China. Toro should have used a metal stopper instead of the crappy plastic for the oil tube. Have they addressed that yet? Anyway great review.
My toro 54 timecutter same issues my deck pulley covers vibrate off I have replaced the twice bc the plastic latch chewed off by the pulley also my discharge chute broke off very easy plus my drive pulley got busted the pulley realm was chewed up by the belt? The dealer Ron Ayres of Greenville Nc didn’t care they said it would take two weeks to fix it well I ended up replacing it my self got it back going everything else is ok so far let’s see how this summer goes todays date is 4/4/22
I bought one of those back in 2020 early-Mid season and add the hour meter and it's already got 200hrs on it and just now today noticed one of the pto pumps is whining and it's leaking hydro fluid and it was hot 🔥 as hell after I had gotten a big yard done I'm trying to research if these pumps are serviceable or not or am I going to have to get the pump replaced don't know yet but trying to find out if it's still under warranty or not talk about one heck of a headache geez my old time cutter from 2010 is still going better than this one is what the hail! 😭🤦😞🤷🤔🧐🤷
I'm looking into buying a ride on mower at the moment but was put off the idea of a Toro because I've been told that the residential models are actually made in China and only assembled in America. Even in this video he says " the engine is tagged by Toro but not sure who makes them" i think he knows who make them. You have to spend big dollars to get the commercial mowers that are made in America. Have you had any problems?
I have a 2015 time cutter, we bought a 2021 my ride told them to come get it. I hated it, compared to a 1000 plus hour one stamped deck even. I have had an 14k 2008 John Deere commercial which I loved minus horrible maintenance cost. This year the motor gave out on John Deere, age/hours on Toro showed. I have welded exhaust back together. Replaced starter/relays, and then charging system went down. Motor runs great, cuts good, just have to charge every time I want to mow. Why we bought the new Toro, but I hated it. So returned just to buy a different brand. Hopefully the Spartan RT-PRO will be just like John Deere/2015 Timecutter SS I loved. Granted the Toro does not directly compare to Spartan/John Deere entry commercial/full commercial mowers I have had. We mow 4-11 acres 1-2 times a week.
I also have very wet terrain and zero turns MX4275 Are you only using side discharge or mulching? What cutting height do you use so you don't have too many piles of grass. Do you cross the grid twice?
I would say don’t do it. Why would I say that though? Well depends on your area and the type of turf you have. Here in Missouri, the grass is very wet and grows quickly. Not even commercial mowers like to be plugged off to mulch our grasses (ryegrass, bluegrass, Kentucky, etc.) The grass is just too wet to be mulched and will stick to your deck turning your mower into an ugly ugly clump machine. southern states with stalkier slow growing grasses, you should be fine, but that’s not my area, so you would have to find a southern review person to ask that question.
I bought the 60 inch commercial my ride Z master. love the mower and seat, But I got the Toro(Chinese) made engine. All Toro engines are made by Loncin A Chinese company. Mine has back fired every since I got it. I took it back to the dealer, It had 20 hours on it. and it still back fires. It came back from the dealer with 40 hours on it. It now has 90 hours and it's at the dealer right now for back firing service warranty. the dealer is kind of jacking me around because they did not put back firing on the first invoice, and they say it got over looked. I talked to the owner on the phone he said it is the fuel pump causing it to back fire, I told him it's probably the fuel shut off valve. He said that mower don't have one, and it does. I asked them for the number for Toro he gave me a number but it was a survey if your over 50. so I called another Toro dealer that is to far for me to take my mower to, explained what was going on and they gave me a number it wasn't Toro it was a Toro distributor Wesco Turf in south Florida. He called the dealer I bought from and they called me and he just fed me a line of bull, But they have my mower right now, but he lied to me a few times thinking I'm stupid, I know my mower has a fuel shut off valve. But if you know a good number to reach a Toro employee I would love to have it. the people I bought my mower from are very dishonest.
I just had to make one comment related to the plastic plug . I have had many objects break because of one reason . Plastic ! My tuning pegs broke , a garbage trash can broke because the foot pedal opening mechanism was plastic , and other items that had an important part made of plastic . Plastic always gets old and brittle . When will manufacturers ever learn ! ? Never never make anything out of plastic . Never !
I would like to ask anybody a question but mostly the guy that's making this video I want to ask you what would you prefer The Cub cadet ZT1 zero turn mower or the toro time cutter zero and turn mower what one is better or what one do you think is better myself I heard a few things bad about the ZT1 and a lot of good about the Toro
Sorry for the late reply Tom. I sold my Cub ZT1 after just a couple of months of owning it. I wouldn't recommend a zero turn from cub to anyone. I've went a solid year mowing 3 yards a week plus a large field and I haven't had a single mechanical issue. Everything that I have mentioned going wring with cosmetic parts on this mower, Toro has already addressed. If you asking Toro vs Cub? Toro all day every day!
I have a time cutter that is about 8 yrs old. It still runs great. I did have to replace the, belt, fuel pump (cheap), tires, blades just from normal wear. I also replaced the 3 belt pulleys which were not expensive and very easy to replace. I love this mower because it is easy to repair, does great job. Paid around $2500.00. All my neighbors had a $10 thousand dollar mower and my mower does just as good cut in the same time. Really good product. It had a 5 star rating when I bought it, and I would of gave it a 5 also. Only issue I would like to have seen was bigger tires and a seat that had more suspension. But I see the new one has both.
Which model was it?
I own a Toro Timecutter. It is a 2020 model. have changed a brake module and a starter relay. It's running good. The motor is Briggs and Stratton comercial 22.5 hp.😊
Great mower, have my 2022 model for 3 months now and I Love it! I cut about 3 acres and a couple miles of trails. Almost bought an eX-Mark Quest 54 until I did the research. Toro owns eX-Mark and this Toro Timecutter is virtually the same mower as the Quest except you get the MyRide and the deck wash hose connectors on the Timecutter for over $1,000 cheaper. I got my Timecutter 75756 for around $3,500 after discounts and rewards so I saved even more. Best mower I have ever owned!
Bought mine spring 2023 and paid $4,200 out the door, this mower stands next to mid range Scags and other higher end mowers hands down. Mow quality is extremely good, and the striping is wonderful.
I feel very lucky that my first ZT was a Toro MyRide 50 Inch. I did a ton of research before settling on this one. My neighbor was so impressed by my Toro that he went out and bought one. He got the Kawasaki engine. Nice Review!!
@@Wontreplyeverdontbother I am very happy with it. It is a workhorse and always performs for me!
Had mine 3 weeks hand controls are adjustable...motor is beast no bogging down...really good cut and power for the money..would recommend to anyone.
I’ve been in some heavy stuff and this mower has plenty of power to plow through everything. I’m pretty darn satisfied with the overall experience of mine.
Just bought one and they have fixed the pulley covers. They now have cotter pins on them that keep them from backing off by themselves
I like this video because there is no fancy words or salesman presentation going on. I just bought one and I like everything about it. Thanks for your observation and honest opinion.
I completely agree with your review. I have the 50” Timecutter with the Kawasaki engine. Runs smoothly and cuts evenly. I don’t have the my ride seating but it is very comfortable. I looked at Cub Cadet, Bad Boy, Ariens and John Deere. I’m glad I picked Toro. My first rider was a Toro back in 1972. Tuff as nails. Still built like nothing else.
I got the same one my dad got the one with my ride and I hate it
Great re-review Randy. Most tubers don't ever get back after some time on the machine. But YOU did buddy! Good on you for being honest on all your review videos. That speaks volumes.
I try my best Sam. I try to be thorough and honest. They can compensate me to do reviews, but I don’t make enough on here to be dishonest. Thanks for the comment!
Thank you for the description of the oil drain tube sticking in place. I went out to the barn and corrected it on my brand new mower, it was tight. I got it just in time. Thanks again.
I have this same model. I bought it last year. Super happy and I looked on-line for any issues before I bought mine.
1: If you cut a high lawn when it's wet you will have issues with clumping. Top end home machine or professional lawn service. We all know better.
2: The belt guards on the deck pullies do fall of. Bad design. Nice try and most of the maintenance items are easily accessible. Better than most small engine designs.
3: This guy Ty-Wrapped his discharge chute. I don't recommend it but if you mow wet, it will add to grass clumping if not raised. I have a small rope on mine to lift the guard to get into my back yard.
4: The oil drain tube is an issue. Put a lubricant on the oil drain hose as soon as you buy it. It will stick to the point of breaking something.
5: I am very impressed with the ease of operation that Toro added to these zero-turn mowers. They are customer conscience and did a great job of making maintenance easy.
6: the grass chute. It was a soft flexible rubber 2 years ago at most and they should have kept it.
7: Toro actually designed and makes that engine. It was a gas pig the 1st few weeks but now as expected.
It consumes less gas now then when you bought it? I ran out of gas on my first cut. I was a bit surprised.
I expect this mower will last several seasons with decent care. czcams.com/users/postUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.
My toro has been absolutely flawless . Had it 2 years love it . Neigh got that big cub cadet and it’s been broke like 4 times I cut his grass for him
John Funk Atta boy! 👍
I killed my XT1 42" CC on an acre after 3yrs, saw the Toros at HD and I think thaysbwhatvibneed to step up to. Is the Kawasaki motor better than the Toro branded one?
I just custom made a flat blade cover for my Myride 54. Scrap piece of metal,angle grinder, drill and half hour labor. Bolts up to holes for factory shroud
If ya have the tools, it’s an easy fix for sure. 👍
4:00 Just purchased the 75754 today and saw that Toro fixed the belt guard issue. There is a screw that the guard fits into and a cotter pin that hold it down. 👍
Had my timecutter 4 3years and love it never had so much fun mowing
Mine is a 2017 and I love it. I have the largest lawn in the neighborhood but I can cut mine the fastest. Myride system is a must have.
Good to hear your still liking your Toro. And as always, great vid! Have over 100 hours on mine and can't find much to complain about. Grass shroud torn=check. Syncro covers come off way too easy=check (mine have cuts in them from the belts). Oil tube fused each oil change=check. Ha ha! Minor things compared to how I feel after a mow. Man my Kubota used to beat me up! Gonna pass this one on when I sell the property and pick up one with a smaller deck. Happy mower over here!
dtn I can look over cosmetics. Lol. I really do enjoy mowing with mine.
Actually...... you can clearly see the 2 adjustment screws 1/2 way down the handle that allow you to adjust the handles on that mower🥴👍
Here we are 2yrs later... Toro Timecutter still runs great... now have 2 neighbors that bought the same thing ... all very happy... all of us have 1+ acre properties
Just bought a 75750 timecutter w Kawasaki 23hp. No my ride, don't need it. The deck and cut quality is top notch. I cut on the medium setting. 7mph on bumps is s handful. Wife uses slow mode.
The different speeds really helps people learn to drive one while being productive better. I have enjoyed mine the entire 2020! I hope you enjoy yours just as much Bradley!
Just finishing up 1st mowing season with the Toro. Great mower.
Yes! I had to fight to get my drain tube off and I broke it! I put a screw in it to keep debris out. My model is a #75745. Great mower though!👍🏼
Kingofmphs I don’t have a problem just plugging mine myself. It IS a great mower!
@@g4outdoors Had the same battle with the drain tube as well. Got it off without breaking however
That’s TOTALLY on Toro!!! I’ve gone through about 3 or 4 of those grass-flaps. Toro definitely needs to come up with a MORE FLEXIBLE grass-flap!!!
Right it so brittle barely hit anything broken…..
I bought mine because of your reviews and videos. Love it.
That’s awesome!! Glad I could help and good luck with your mower!
G4 Outdoors Thank you! Keep up the good videos!
I drilled a couple of 1/2 holes in the plastic covers that go over the spindle pulleys on the deck. Then i put an air hose in there and blow it out when I'm cleaning off the machine. That way I can clean it without having to take the covers off. Works good.
Cut the decks discharge flap short. It will provide the protection needed, and eliminate the wind rowing.
Great idea
I work at Lowe's and we had a returned one that seemed to checkout fine when inspected. Its the my ride 54" and I got it for $2300. Delivery is in a few days so im checking out videos
Thank you for your honest opinion from somebody that rides on a mere dawn on everyday I really appreciate that I'm getting ready to buy me a 0 turn here shortly and I've been watching a lot of videos is out of videos on all the different brands
we have a cub cadet Zforce 60 " and I am thinking of getting a Toro 50 inch to fit in some tighter spots ... thanks for the great video. I share a lot of your cutting techniques. Cross cutting is only for people that really like lawns.
I just looked at a timecutter myride and they now use a cotter pin to hold the pulley assembly cover in place. Easy off easy on.
Thats good to hear!
FYI, I was a bit concerned about the Chinese Toro motors when doing my pre purchase research, I didn't read about any real issues just that it can be hard to find parts outside of toro dealers. But I found out that there are models online that usually don't show up to the brick and mortar stores which have real engine options, I bought one with a Kohler 7000 series.
I just performed the 5 hour oil change on my mower. Even after watching this video, taking care and wiggling and twisting, I still couldn't take the oil drain hose off without breaking the plastic plug. Very frustrating. I spent 50 minutes having to chat online with TORO because there is NOBODY to speak to live. Very frustrating. I wanted to know what they are doing regarding this well known issue and all I was told was take it back to my dealer for them to look at it. But, I bought mine at Tractor Supply. They're not considered dealers. So I called the nearest dealer, 20 miles away, who told me that there was NO GUARANTEE that TORO would cover the cost of a new shroud. And that they had not heard any feedback from TORO that there is an issue. AND WHEN YOU DO AN OIL CHANGE, DON'T BOTHER LOOKING IN THE MANUAL FOR A FILTER PART NUMBER, ITS NOT THERE!
I never found a filter # or a cross reference # either. I might have mentioned that in my oil change video.
I had a terrible time and horribly failed whenever dealing with customer support. I won't buy another toro for just that reason. No help from dealer or Toro.
Have a oil vac too remove engine oil. Simple too do, takes a couple of minutes. Buy at Amazon!
I think an idiot designed that.
After messing around for 20 minutes, I cut the tube off and plugged it.
I had been set on getting the cub zt1 until I saw your videos on those. I stopped in a local dealer back in June after watching the initial review video of this mower and they had a 2019 model on clearance. Of course there are differences, but certainly not in quality. I absolutely love the myride system and the cut finish takes my yard to the next level. The neighbors have all complimented the look of my lawn since buying the 50" myride and laying down the stripes for that professional look.
If you get the 26' model, you can include your neighbor's homes as your lawn... and THAT'S an improvement.
Regarding the shoot blocker, couldn't you cut it back, so it still covers the deck opening yet doesn't impede the grass disbursement.
That is what I plan to do.
I went to Tractor Supply and got me one and I love it that's a nice ride
we have a cub cadet Z460 and I am thinking of getting a Toro 50 inch to fit in some tighter spots ... thanks for the great video. I share a lot of your cutting techniques.
I have a54” Toro the battery last less 6 months. Now I am having problems with safety switch, on the handles, the sit, it clicks but not turn on. I bought mine at Tractor Supply 2 ago and the people’s there have very little knowledge about troubleshooting❗️
Damn 3 years and many people get new ones. I run mine till the cant go no more 😂 last one was 7 years and it was meant for a 1.5 acre and i mowed my 4 acres every time with it 😂. Now im looking to get one of these so it can last at least 10 years lol
This one has all the right parts to last well over 3 years! Some people do get a new mower every year. I don't know if its because they made a mistake on their last purchase or they just have to have the newest best thing. Gotta keep up with the Joneses, but why try to flex with mowers? LOL.
Ive had a timecutter for damn near a decade. Still mows my 3 acres great but im planning on upgrading to the 60" soon.
I just bought the 50" model and love it. The 50" is identical except for the additional 4" of cutting, same engine, frame etc. Unfortunately toro still has the same oil tube issue. I haven't broken the plastic "plug" yet but I won't be surprised if/when it happens.
I wish Toro (or someone aftermarket) would come out with a flexible rubber discharge chute to replace the hard plastic one that breaks.
Having a 50" delivered next Friday. Looking forward to it! Thanks for the review
Helpful reviews. Looked at this machine for a while and compared it to the Scag Liberty Z. Ended up going with Scag.
Nothing wrong with a Scag man. Not a bad word to say about them. I was actually extremely close to buying one at the beginning of this season.
I think i'm gonna buy one of these mowers soon , my old 2007 rtz50 cub cadet has 750 hours on it and its tired ... i want the 60inch toro but my bank account says' Nah , you need to look at that 54 inch instead" LOL
2019, I ran a 60", 2020 I ran this 54". Don't laugh,,,,, 6" gets the work done noticeably quicker. The good thing about this Toro 54 is, the motor is the same that they put on larger mowers, so it's "over powered" letting you cut thicker grass without bogging down as you would with the 60" of the same model. You're doing fine with the 54". I didn't want to sell my last Cub zero turn tractor. It was 12 years old and I didn't know how it was still standing, but it started every time and mowed grass, I always had the feeling it was going to be its last mow. 4 years later, it's still running! I know the guy I sold it to. Sometimes you get lucky I guess lol.
Lol
Saw another vid on this machine. I think that the exposed blade on the chute is made that way to assist in the discharge of grass when the bagging unit is in place.
Yes I agree.. How can you fly being covered up. This opening let's grass go up and away
The exposed blade makes this mower great for tall thick wet grass. No clogs, shoots that grass far. But it is kind of spooky having that blade exposed.
I never could see the fascination with stripes, as long as it cuts even is all I'm concerned about. I was never a Toro fan but I bought an older timecutter and have enjoyed using it.
I picked one up yesterday... it's pretty, so I've left it in my truck and probably will till the weekend. : )
we have a Z5060 that we bought in 2010 - in 2016 I had to replace the LH transaxle @ a cost of $1400+...now the RH side is toast & it's $1580 just for the part...it seems to get "serviceable transaxles" one has to spend a helluva lot more
I bought aToro 50" cut love it. I Agee about the plastic discharge. PS 4 years
Parking brake control module gets water in it easily when you wash your mower. This causes an intermittent short in the electrical system resulting in malfunctioning safety switches and no starting. $150 part (2022). 1 year old mower warranty claim denied due to water in the part. I believe the part should be waterproof on an "outdoor " product. If you do not wash your machine then other parts can malfunction (belts, pulleys, etc). I have a problem spending $150+ every time I wash my machine. Good thing I am lazy and just washed it once with a regular hose sprayer. Otherwise great mower, great ride.
Thanks for the great review. Was really wondering about the My Ride and how well it really worked. I have a Bad Boy right now, been a great mower but rides like a lumber wagon. Considering getting one of these.
It looks like the blade height adjusts in 1/2" increments, same as my Husqvarna. I much prefer 1/4" increments like a John Deere I had at one time.
I’m probably going to get this mower now knowing it cuts better than the Ariens
What i would do take a saw and cut it off so it covers the blade and sits level with the deck,this works well on all models with a Huge deflector.
My exmark has the same engine and oil drain and it is 4years old and it never broke.
Toro makes exmark.
I have the same mower but 50 inch . I agree with everything your saying.
I hated the “my ride” I went and returned mine for a stock one without the my ride it rides so much and way more storage compartments
I did the same thing I hated the my ride
I'm with you on that flap it can be in your way at the best of times. Myne actually got a clip where it's actually flipping up
Great review Mr. Randy , the cut looks phenomenal . About time to wet a jig isn't it ~
It’s always about time to wet a jig and give it a dangle!
I'm two years late but just cut the plastic back on the shoot to make the cover for blades.
I love mine. I have the 42 stamped deck and no my ride. I run it commercially for now and it never has cuffing or drive issues. ONE ISSUES THOUGH-- and toro will not fix it. Do NoT stop on your turf while its running. Unlike most zeros, the exhaust for the timecutter points striaght down into the grass and not up amd away like its supposed it. Toros recommendation is to drive to the street and stop. Not an option when your doing acre size back yards.
I wouldn’t necessarily put that on Toro. That is an engine manufacturer problem, although, Toro absolutely could request a redesign of the exhaust. On some of my other brand of mowers reviews, people often talk about how the mower is junk because the drive motors fail. What they don’t realize is they are 90% ALL the same brand motors in all mowers! 🤣. Thanks for the comment ,,,,,,, and now that I’m getting ready to insert your name here, I’m definitely going to have to check out your channel!! Do you make rods?!
Ah man! It’s just a family channel 😤. lol.
@@g4outdoors
Its a family channel but my rods are on there. Older ones.
I havent done videos on my customs in a while but i do still make them.
You can check out Www.ZiggyBsportfishing.Com and mostly all the rods used are my customs.
Boat has been laid up for 2 years now due to a complete rebuild.
Does it have the Toro motor? The Kawasaki motor exhaust points to the side and has a metal plate beneath it.
@@Methodical2 toro
Perfect review. What I was looking for.
Thank you!!
I have a titan max, the hydros whine. No issues IMO and i wear hearing protection anyway
I bought the 42mx time cutter in 2019. Have had multiple problems with. It has been in the shop several times. Lest say most of the mowing season. Toro doesn't want to know anything. They drag there feet before authorizing repairs, with one of there dealers. I could go on with a list of dates and what the problems where.
I actually like the cut out at the discharge on the deck the grass doesn't gum up and plug up the deck like on other mowers with that cut out like it is I understand the danger but I would rather have it like that then have to reach and grab the grass out of there whenever it does get clogged up on wet tall grass
GOOD REVIEW, I watched your first video and bought one of these last week. A couple complaints I have is with the PTO on the machine is very loud. Reminds me of being in an old Cessna airplane. I had to get my shooting muffs out to reduce the noise. The deck assist adjustment is not usable for my while mowing. I have a 34 in inseam and am not able to use the deck assist while mowing without contorting my right leg. You had said on your first video that the mower cut 100%, I did not find that to be true. My mower leaves stragglers in the same line, off and on.
I literally just paid for mine 10 minutes ago
Thanks to your honest review and videos also all of the questions that I had you promptly responded I hope that Toro will be rewarding you because of you many more of us are buying Toro products
I’ll keep you posted if any issue
Again thank you for your time and responses
By the way; at the end of this video did you just crash into the bushes lol 😆?
Yes I did! 🤣. It can’t all be serious straight faced videos. You are super welcome for the responses! Well except for this late one lol.
Thanks for the great review. I'm heading out tomarrow morning to make the purchase. Your video answered many questions and I'm feeling much more confident in the investment.
My ss5000 timecutter has always, making turnarounds, tires tear up the grass to the dirt! And inclines back tires will drag for some reason and rip the grass up! Makes me 🤬. Then the idler pulleys that you can’t grease, 2 yrs all you get out of them before the bearings burn up! Kawasaki motor is great. Had to replace every switch on the dang thing, plungers on handles, starter switch, trans actuator switch ($90!), seat safety switch etc… every stinking year something goes bad!
Great reviews all around. I’m definitely thinking about buying one of these machines.
I recently picked up a Toro Recycler AWD walk behind mower and it is the nicest mower I have ever had. Definitely impressed with Toro.
I got mine yesterday. I don't know how it cuts yet, but it looks great in my truck bed. : )
I think I narrowed it down to the following ztr. Ariens xd52, Gravley ztx 52 which seems to be the same as the Ariens with slight differents and 200 more and Toro timecutter 50" without myride. Was looking at Hustler as well. Guess my main question is what is the life expectancy of the 2200 hydros? I have a 1acre lot, will I get 10 or more years out of these? Most of the dealers are really pushing the 2800 hydros. I keep thinking to myself. I have had a 2002 riding mower since new. Never had any issues with hydros. Is 2200 hydros fine or do I really need to spend the $1,000 more and get the 2800 hydros.
Great questions Travis! For real. You have actually picked some of the top brands and took into consideration one of the biggest components of the mowers. First of all. Ariens is Gravely. Same company, same manufacturing, different colors. I’m assuming you know all of these Hydrogears on all of the mowers are the exact same brand as well. SO, the 2200’s are an entry level hydro. You are really rolling the dice on how long these will last. Sure you can get some to last 10+ years. I’ve had one last me 12 years and I sold it as a working mower. Then I’ve seen them crap out in less that a year. When you step up into the 2800’s and 3200’s, you’re getting a higher pressure unit. You are still rolling the dice with these hydros as well though, but the dice are a little weighted. You will get better life out of a bigger hydro just because they aren’t going to be working as hard. If you feel comfortable with the 2200’s, I would then take into consideration “dealer support”. With most of the mowers having a 3 year warranty, you want an honest dealer that is going to take care of you and not say that you ran it too hard or abused it, or something stupid like that to get out of having to do warranty work. In my OPINION, a 2200 will do just fine with one acre, a 2800 will do better and you will be more happy with the performance, especially if you have a lot of obstacles and hills. Flat ground? The 2200 will be just fine. I know there is still a lot of concerns that you might have. If at all possible, find a dealer that will let you run around the lot on a couple of machines and feel for yourself what you will like better. Most local mower dealers have demo units on the lot. I hope that helps some Travis! Best of luck to ya!!
@@g4outdoors Thanks for such a detailed response.
One acre lot dude that is not alot. This mower is overkill
Tied between the Husqvarna 50's and Toro 50's. Kawasaki or Toro engine doesn't matter. They are both commercial grade in my opinion. I'll never buy anything with a Kohler engine again! Was looking at Cub Cadets before watching this video and really they are alright they just aren't something I would recommend for someone going into the lawncare business.
I saw this NEW mower at Home Depot today and the GRASS FLAP was broken identical to your....lol
Thanks for the review! I just picked up the 50" yesterday. Any updates on a cover for the discharge? I am going to install the recycler kit and even though that hides the blades, I'd still like a cover for it so I can take the flap off.
Nah. That is how it's designed for bagging purposes. I don't foresee any changes.
I got the recycler kit for mine. I've found that the blades the kit comes with have no lift at all and seems to lay the grass over. I tried more aggressive blades but it was too much for the mower and bogged it down unless going very slow. It does make the yard look great but I cut 2 acres and don't have the patience to go that slow haha
Mine is about 4 years old and I have replaced the hydro gear 3 times .I will not buy another one.
I bought mine less than year I have had belt problems blades ,I had to replace in less 3 months,now safty switch problems,just put new brake module,and still having problems with mower
I myself I want the Toro time cutter but I only can afford the 42" but I would like to have an iron deck on it and a high back comfortable seat like the one I seen in your review and the toro 22.5 HP commercial engine if I can get the my ride I'll get it but if I can deal with out it I'm fine but in order to get half of what I want it comes with a different engine and the seat that I don't want
I’ve seen Lawncare companies mow for years with the smaller Toros! I wouldn’t be afraid to get the 42. I wouldn’t want it, but I wouldn’t be afraid. Lol.
Just ordered mine, cant wait!!!
Cool!! You’ll really enjoy it! Congrats!!
How do you like your mower
@@vicirish74 Love it well worth the money
Randy, great review. I have the same mower without the my ride. I love it!!! Awesome cut and a quality machine. Silly question but i mow at 4" also and was wondering where you have your anti scalp wheels set
If you mow at 4”, the anti scalp wheels are no bother to you. They are only there for larger angulations of the ground and to keep the deck and blades from scalping. If you were normally mowing at 2”, I would entertain the idea of giving a more in-depth response.
@@g4outdoors Thank you for the quick response. My property is very uneven in many areas. There are 4 predrilled holes to choose from for the wheels and I was just wondering if you had a recommendation on where to set them.
You’ve reviewed both toro time cutter and the Aries apex. In your opinion which mower is better? I’ve read some horrific reviews on the apex.
I bought my toro zero turned 60 inches brand new
The first year, very hard to take the blades out because somehow the bolts got too tight. The same first year, the cutting belt came lose.
Took it back to the dealer, they tried to Jack me with the cost of fixing which still under the warranty. Got them fix them free. The issues still persist.
Brand new 60 inches zero turn with suspension 10000$.
Toro is ain’t my thing no more.
This year, looking to buy a second one as I have about 10 acres of grass to cut.
NO TORO…,
I have this mower with the Kawasaki engine and 50" deck. No problems except one, I can 't stop on my lawnmower for more that 10 seconds in one spot or I will burn my lawn. I spoke with the dealer and they talked to Toro and said I need to make sure I am running my engine at full throttle to keep the hydro fans running as fast as possible in order to keep the heat dissipated off the units. I have also looked at my muffler discharge and it does not appear to blow down on the ground where the spots appear. Anybody else have this problem? Any solutions?
Interesting. I have not seen this, but have heard of it. I also checked the muffler discharge and it discharges side ways and has a metal baffle beneath it. Is Toro saying the hydros are causing the burning issue? I have not seen it, but I just got my ZT about 2 weeks ago.
The engine is made by the Loncin Motor Company in China. Toro should have used a metal stopper instead of the crappy plastic for the oil tube. Have they addressed that yet? Anyway great review.
They have addressed this issue! Thanks for the clarification Paul.
I bought a small hand vac from Briggs and Stratton to change my oil works real good!
My toro 54 timecutter same issues my deck pulley covers vibrate off I have replaced the twice bc the plastic latch chewed off by the pulley also my discharge chute broke off very easy plus my drive pulley got busted the pulley realm was chewed up by the belt? The dealer Ron Ayres of Greenville Nc didn’t care they said it would take two weeks to fix it well I ended up replacing it my self got it back going everything else is ok so far let’s see how this summer goes todays date is 4/4/22
You shouldn’t have had an issue with any of the pulleys, but if you got it changed, your golden!
I bought one of those back in 2020 early-Mid season and add the hour meter and it's already got 200hrs on it and just now today noticed one of the pto pumps is whining and it's leaking hydro fluid and it was hot 🔥 as hell after I had gotten a big yard done I'm trying to research if these pumps are serviceable or not or am I going to have to get the pump replaced don't know yet but trying to find out if it's still under warranty or not talk about one heck of a headache geez my old time cutter from 2010 is still going better than this one is what the hail! 😭🤦😞🤷🤔🧐🤷
I bought mine here in Australia about 6 months ago then it stopped raining.... love the mower just don't have grass to mow lol
I'm looking into buying a ride on mower at the moment but was put off the idea of a Toro because I've been told that the residential models are actually made in China and only assembled in America. Even in this video he says " the engine is tagged by Toro but not sure who makes them" i think he knows who make them. You have to spend big dollars to get the commercial mowers that are made in America. Have you had any problems?
@@stephenwatson2328 zero problem mate been great so far
I have a 2015 time cutter, we bought a 2021 my ride told them to come get it. I hated it, compared to a 1000 plus hour one stamped deck even. I have had an 14k 2008 John Deere commercial which I loved minus horrible maintenance cost. This year the motor gave out on John Deere, age/hours on Toro showed. I have welded exhaust back together. Replaced starter/relays, and then charging system went down. Motor runs great, cuts good, just have to charge every time I want to mow. Why we bought the new Toro, but I hated it. So returned just to buy a different brand. Hopefully the Spartan RT-PRO will be just like John Deere/2015 Timecutter SS I loved. Granted the Toro does not directly compare to Spartan/John Deere entry commercial/full commercial mowers I have had. We mow 4-11 acres 1-2 times a week.
I’d really like to try a Spartan! They look super comfy and way overbuilt ( not that that’s a bad thing lol).
One thing I REALLY dislike is the tiny gas tank. It's NOT 5 to seven gallons, it's 2.5
Toro makes the motor. They're good machines, just too small for what I needed.
I also have very wet terrain and zero turns MX4275
Are you only using side discharge or mulching?
What cutting height do you use so you don't have too many piles of grass.
Do you cross the grid twice?
Who are you and what input do you give Toro?
Great review and info. 👍
Just bought the 54 myride 2022 version
What do you think about installing a mulching kit ?
I would say don’t do it. Why would I say that though? Well depends on your area and the type of turf you have. Here in Missouri, the grass is very wet and grows quickly. Not even commercial mowers like to be plugged off to mulch our grasses (ryegrass, bluegrass, Kentucky, etc.) The grass is just too wet to be mulched and will stick to your deck turning your mower into an ugly ugly clump machine. southern states with stalkier slow growing grasses, you should be fine, but that’s not my area, so you would have to find a southern review person to ask that question.
How do you like it??? I am looking at buying one. I almost did today but wanted to look at more reviews.
How long would this take to do 5 acres of cutting, give or take, similar setup to your yard? Great review btw.
I have this video on just that!! czcams.com/video/keoh0M_NptQ/video.html
I'd get the 60" for that size lawn.
My dealer says the 24.5hp is a Kohler, I got the 23hp Kawasaki.
I bought the 60 inch commercial my ride Z master. love the mower and seat, But I got the Toro(Chinese) made engine. All Toro engines are made by Loncin A Chinese company. Mine has back fired every since I got it. I took it back to the dealer, It had 20 hours on it. and it still back fires. It came back from the dealer with 40 hours on it. It now has 90 hours and it's at the dealer right now for back firing service warranty. the dealer is kind of jacking me around because they did not put back firing on the first invoice, and they say it got over looked. I talked to the owner on the phone he said it is the fuel pump causing it to back fire, I told him it's probably the fuel shut off valve. He said that mower don't have one, and it does. I asked them for the number for Toro he gave me a number but it was a survey if your over 50. so I called another Toro dealer that is to far for me to take my mower to, explained what was going on and they gave me a number it wasn't Toro it was a Toro distributor Wesco Turf in south Florida. He called the dealer I bought from and they called me and he just fed me a line of bull, But they have my mower right now, but he lied to me a few times thinking I'm stupid, I know my mower has a fuel shut off valve. But if you know a good number to reach a Toro employee I would love to have it. the people I bought my mower from are very dishonest.
Are use a higher octane fuel and I’m ready to shut the more off I will let down for 30 to 60 seconds and shut it off and that seems to help!
I was looking at this mower and I’m curious if the toro motor is holding up?
I just had to make one comment related to the plastic plug . I have had many objects break because of one reason .
Plastic ! My tuning pegs broke ,
a garbage trash can broke because the foot pedal opening mechanism was plastic , and other items that had an important part made of plastic . Plastic always gets old and brittle . When will manufacturers ever learn ! ?
Never never make anything out of plastic . Never !
I would like to ask anybody a question but mostly the guy that's making this video I want to ask you what would you prefer The Cub cadet ZT1 zero turn mower or the toro time cutter zero and turn mower what one is better or what one do you think is better myself I heard a few things bad about the ZT1 and a lot of good about the Toro
Sorry for the late reply Tom. I sold my Cub ZT1 after just a couple of months of owning it. I wouldn't recommend a zero turn from cub to anyone. I've went a solid year mowing 3 yards a week plus a large field and I haven't had a single mechanical issue. Everything that I have mentioned going wring with cosmetic parts on this mower, Toro has already addressed. If you asking Toro vs Cub? Toro all day every day!