@@3x3CustomTamar You sure you're not from NY? Between "draw" and "foward" you sound like all my Long Island friends and family haha! Being from VT and going to college in MA, my brain gets super confused with accents sometimes :) Agree with @fletcherdale4371 great vidieo.
@@3x3CustomTamar oh wow! Maybe I’ve asked you before hahaha. Come visit sometime and be our guest at a woodworking club meeting! Or if you’re around September 9th and 10th, we have our annual show at the Cradle of Aviation museum! (I’m doing a demo on the 9th…)
Ohhh, I like that slide, spacer trick where you cut the spacer as you move down... Always learning new things watching your videos. You should have a A-Z series for new woodworkers. The way you explain things is easy to understand and put into practice. Thank you!
Tamar, you may have outdone yourself this time. That is a very good-looking desk and file cabinet. Your explanation of how to build the cabinet and drawers is spot on. Very well filmed and explained. You have come a long way with your woodworking skills, and it is always a pleasure to watch one of your videos. BTW - Not only did I watch your video some time back where you answered question and talked about how you pronounce "drawer", I watched Norm for enough years to know exactly what you are saying.
I have never seen a clearer presentation ! Thoughtful, practical, and immediately useful. Your videos are at the top of my favorites. You presentations fit very well with my wood working skill level.
Beautiful and elegant desk, I would like to see the curved part as you did. Thanks for sharing your knowledge. Receive many blessings. Greetings from PR
Thanks - one of the best drawer videos !!! ... To add a small "trick" if you have a lot of cabinets to fit drawers of different sizes , rather than using a "scrap" panel of plywood to size where the cabinet drawers fit and cutting it to size each time , take a couple of off cuts and cut them to a few pieces of 20cm, a few pieces at 10cm , 5cm , 2cm and 1cm and color code them with some sharpie ... This way you can "build up" a spacer of any size you want rather than "wasting" a lot of panels and sacrificing them as spacers .. if you have 5 cabinets of different drawer sizes you would end up "wasting" 5 different panels of ply (and plywood is NOT cheap these days!)
I will come back and watch this video a desk video, but I came here to say you are getting famous, I saw you in an ad for the Saker Honing Guide for sharpening chisels etc.. Kind of cool to see you else where.
@@3x3CustomTamar I certainly will try and get it to you if i ever see it and can see a way to send a link. I am not sure about doing that with an ad, I looked for the commercial on youtube, but didn't see the same video that you were in. I have seen this happen to people from other channels I watch also.
so many little lessons I picked up here showing the cutlist marking your lines on painters tape so you don't have to erase them the spacers when marking the drawer heights
The author does like to from scratch, czcams.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
As always. Love love love the video. Ty for helping all of us along. I never really expected you to be from NE USA until I heard you say “drawer”. Most of the other words aren’t as pronounced. Not making fun at all. We all have accents and I love them all. Thanks again
Tamar, I love that you are teaching this old dog new tricks! That cabinet looks like just a few adjustments can turn it into a two drawer file cabinet (which I need to build 🙂). Thanks for the well thought out guidance and bit of humor.
Okay I was confused on how to find the video, you have to wait for the plans emailed by sawstop and then I was able to get it! It’s gorgeous Tamar!!! Your videos are always like Christmas morning, I’ve learned so much and have overcome fear of using the tablesaw and in general your “how to’s” because I had your wealth of knowledge and demonstrations to guide me and many others so thank you! Always look forward to your work
I like your method for installing the drawer slides. I have a project started that has 2 drawers. I was unsure how to measure for and align the slides. I'm saving this video in my favorites for later review. Thanks again.
@@3x3CustomTamar - I kept wishing you'd say, "I'm going to draw this drawer first, so I make sure to get the size perfect." lol...I remember the first time I heard Norm Abrahams pronounce "drawer" with the silent 'r'. You're following in his footsteps in more ways than one. Great build and a great video. Hopefully my content here on CZcams will be up to this level some day.
@@3x3CustomTamar lol...that is gloriously brilliant! I grew up Southern with a Cajun mother and MANY things and stories her family told confused me as a child...so I understand...lol.
I have to say this was the best video I’ve seen that best explains how to size, align and install drawers and their runners. Others and there’s been many, have left me confused but now I feel I could give it a go. Thank you 😊 🙏🏻
Hi Tamar. Great work as always. Just an idea, you should make a little stand that connects to the vacuum boom arm of your table saw to hold your plans and make a little place for your pen as well to mark off stuff.
lol youre like great ill add it to the 150 other things i have to get to doing haha. i hope you know, people like you and a few other makers have truly inspire me to get into woodworking. My ad and i are currently working on creating a workshop on the side of their house. Your growth and progress is fun to watch. Thank you for everything and how sweet youve been @@3x3CustomTamar
Amazing project beautiful and you make it seems easy to build. I like the way you give us the instructions and tips and even for my poor English level it's easy to understand. Super 😊
At the price of postage stamps today, you maybe should have included a combination dial lock on that thing.... like, a bank vault style. ;) NIce video - always a good watch !
most excellent...! love the video, tamar...! very impressed with how far you have come with your videos and woodworking skills... you are an inspiration to all woodworkers (male and female)...! 👍
That is a great looking desk. Love walnut. You're brave using a paint brush instead of a roller on the rolling cabinet. No wonder you don't like painting ;-). I've generally stopped marking for the Domino's middle holes, but instead use the cross stops (I have a DF 700, so maybe they're not as handy on the 500). Much quicker, and more accurate. Fun to watch the cabinet come together.
I feel like biscuits are perfect for drawers like this. No need to align and then screw it in place. Just clamp and done. Nice thing about screw is that you dont need to clanp though
Tamar, I hope you’re not offended but I find your combination of extraordinary woodworking acumen, gregarious personality, and “girl next door” looks highly attractive! 😂
For all those people talking about “draws”, i’ld suggest you to make the next video in french.😂 Even in a cloudy🌧️morning, your video is the sun☀️in my day❤️
The more I heard you say "draw" the more I started to distinguish other subtle differences in how you speak. I don't know how i didn't notice while watching a lot of your other videos 😂. Love your content and your accent is cool 😎
@@markbailey350 vertically? I knew how tall the cabinet needed to be to fit under the desk. I knew how tall the bottom drawer had to be to fit files. I divided the rest in 2 🤷🏻♀️😂
I moved and am building a workshop again. Your file cabinet, with minor tweaking of drawer sizes, will make a great little workshop storage cabinet that fits under some of the work tables. Thank you. @@3x3CustomTamar
That is a gorgeous desk!!! It looks so modern and has such a unique design. Great job and I love the secret compartment. No doubt your kids will find your candy stash in no time though! Thanks for another great video and BTW, I'm loving my 6-in-1 trim router jig!
Always great tips in your videos. It's the small things you figure out and pass on that add up to great project videos. And it's always a good video when we get to hear you saw "Draws" over and over.
On a lot of vids. The comments can be “Oh well your using Festool” if I had the cash there is nothing other than Festool, that I would purchase. You get what you pay for. Festool and a couple of other manufacturers are the top quality. I don’t have the requirements to use Festool etc. I don’t do enough work to pay the price. But sometimes I think wow if only I could afford to use Festool. Lovely tools. But even if the tools are top line! You still need the ability/Knowledge/ Skill to use them. Lovely vid, Tamar ! You are not uploading enough vids.
I messed something up real bad on my sawstop yesterday… just because it’s a higher quality tool doesn’t mean everything will be perfect. You still need to know how to use the tools. Those comment always made me laugh. And I’m trying to upload more. But I have 3 kids who are getting bigger. Which means bigger problems! They will always come first.
Cue the “draw” comments! It was more common to hear this when I lived in NJ than my current home below the Mason-Dixon line, so I love to hear it…reminds me of home. Of course the woodworking in this video is great, as ever…I’m not just here for accent porn! 😂
@@3x3CustomTamar You’re the last of a dying breed. There has to be someone who’s the last to have this accent. Pretty soon linguists will be contacting you to do interviews to preserve the legacy of your ancient dialect.
@@3x3CustomTamar I became your fan watching the Records cabinet you made. that was some really out of this world stuff. The resilience, persistence, “evaluating life choices” and finally when the platter got spinning, i was down right 🤯 👏👏🙏
Any plans for a project that utilize 20 / 30 or 45 deg.angle Joinery ? This seems to be the least addressed type and everything I've seen are for small joints like drawers vs larger pieces that would need strength .
The black paint and walnut combination really stands out. A few thoughts: didn't you consider mitered edges for the module? You have a domino cutter anyway, and although assembly is more difficult, you wouldn't have to struggle with putty afterwards. Visually also more attractive as you don't have plywood end grain. For this kind of furniture I would even consider MDF rather than plywood.
Good morning Mrs Tamar , you're lucky to be able to get away with such a small filing cabinet , in my home office it's a 4 drawer legal size 600 pound beast that's almost full 😿 / btw - now your kids know where your secret candy stash is 13:52 - and you've probably been robbed and cleaned out by now 😹😸 , Happy Caturday 😸😺
It’s a beautiful build and the black paint looks like it turned out very smooth. Is there any reason you didn’t edge band the top and bottom of the carcass?
awesome build. I have wanted to make some thing similar to store airbrush paints. I am curious how you came up with the draw heights? is there a generally accepted height, or do you decide how many drawers you want and divide the space evenly?
Well… I knew I needed the bottom drawer to be tall enough for files. And I knew this needed to fit under the desk. So after those 2 things were works out I could just divide what was left over.
Watch the desk build and dowload the FREE plans here - bit.ly/SawStopCurvedDesk
I don't see the full desk build video on the website, only a link to this channel.
No video there
@@quarteratom the link with the video and free plans gets sent to you after you fill out the form I believe
Always a good day when Tamar uploads a new video!
☺️☺️
Agreed!
Agreed. Not enough uploads.
@@donlunn792 wish there were more hours in the day…
Especially when it involves drawers!
Thanks for a much anticipated "Draw" Video!! Excellent as always!
😂
@@3x3CustomTamar You sure you're not from NY? Between "draw" and "foward" you sound like all my Long Island friends and family haha! Being from VT and going to college in MA, my brain gets super confused with accents sometimes :) Agree with @fletcherdale4371 great vidieo.
@@BenNawrath I am most definitely from NY. Long Island to be exact.
@@3x3CustomTamar oh wow! Maybe I’ve asked you before hahaha. Come visit sometime and be our guest at a woodworking club meeting! Or if you’re around September 9th and 10th, we have our annual show at the Cradle of Aviation museum! (I’m doing a demo on the 9th…)
Ohhh, I like that slide, spacer trick where you cut the spacer as you move down...
Always learning new things watching your videos.
You should have a A-Z series for new woodworkers. The way you explain things is easy to understand and put into practice.
Thank you!
Glad you learned something from it!
Love it. We all know the hidden compartment for the saw stop desk is for a pack of hotdogs.
Haha of course 🤦🏻♀️
You always do such a great job of explain what/how you did things. If i ever have a question, you almost always answer it with a few seconds.
I really try to anticipate any questions. So that’s awesome to hear!
Tamar, you may have outdone yourself this time. That is a very good-looking desk and file cabinet. Your explanation of how to build the cabinet and drawers is spot on. Very well filmed and explained. You have come a long way with your woodworking skills, and it is always a pleasure to watch one of your videos.
BTW - Not only did I watch your video some time back where you answered question and talked about how you pronounce "drawer", I watched Norm for enough years to know exactly what you are saying.
Glad you liked it! I never knew I had an accent until I started posting videos to CZcams
My favorite part is listening to the Boston accent come out every time she says drawer.
@@SeanBlader *New York 😉
Very inspiring to watch you make everything look semi effortless while I’m here struggling to align my deltas fence 🤦🏻♂️
Haha. You’ll get there
I have never seen a clearer presentation ! Thoughtful, practical, and immediately useful. Your videos are at the top of my favorites. You presentations fit very well with my wood working skill level.
New tips don't matter. Your clear instructions with confidence, regardless of mistakes, is the best help.
👍👍
1:10 Rockler's banded glue clamps also work great for edge banding.
Beautiful and elegant desk, I would like to see the curved part as you did. Thanks for sharing your knowledge. Receive many blessings. Greetings from PR
Glad you liked it! It was fun for sure
Thanks - one of the best drawer videos !!! ... To add a small "trick" if you have a lot of cabinets to fit drawers of different sizes , rather than using a "scrap" panel of plywood to size where the cabinet drawers fit and cutting it to size each time , take a couple of off cuts and cut them to a few pieces of 20cm, a few pieces at 10cm , 5cm , 2cm and 1cm and color code them with some sharpie ... This way you can "build up" a spacer of any size you want rather than "wasting" a lot of panels and sacrificing them as spacers .. if you have 5 cabinets of different drawer sizes you would end up "wasting" 5 different panels of ply (and plywood is NOT cheap these days!)
I will come back and watch this video a desk video, but I came here to say you are getting famous, I saw you in an ad for the Saker Honing Guide for sharpening chisels etc.. Kind of cool to see you else where.
I didn’t allow them to use my image to sell their tools… can you please send it to me if you see it again?
@@3x3CustomTamar I certainly will try and get it to you if i ever see it and can see a way to send a link. I am not sure about doing that with an ad, I looked for the commercial on youtube, but didn't see the same video that you were in. I have seen this happen to people from other channels I watch also.
so many little lessons I picked up here
showing the cutlist
marking your lines on painters tape so you don't have to erase them
the spacers when marking the drawer heights
So glad you learned a few things a long the way! I did too 😉
The author does like to from scratch, czcams.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO shaping and trimming wood from large blocks into fine finished products. As another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us don’t have the room or budget for. But, knowing how to do these things, even if we won’t be able to practise the full stack project, is still great.
As always. Love love love the video. Ty for helping all of us along. I never really expected you to be from NE USA until I heard you say “drawer”. Most of the other words aren’t as pronounced. Not making fun at all. We all have accents and I love them all. Thanks again
Ha. We’ll there’s no reason for me to say “coffee” or “sauce” in a woodworking video
@@3x3CustomTamar sure there is. Coffee stain. Coffee bar. Coffee hutch. Yeah. Sauce doesn’t work really. Lol
Tamar, I love that you are teaching this old dog new tricks! That cabinet looks like just a few adjustments can turn it into a two drawer file cabinet (which I need to build 🙂). Thanks for the well thought out guidance and bit of humor.
Yup! I needed to top for thinks like paper and ink 👍
Okay I was confused on how to find the video, you have to wait for the plans emailed by sawstop and then I was able to get it! It’s gorgeous Tamar!!! Your videos are always like Christmas morning, I’ve learned so much and have overcome fear of using the tablesaw and in general your “how to’s” because I had your wealth of knowledge and demonstrations to guide me and many others so thank you! Always look forward to your work
Yeah I wasn’t exactly sure how the video was going to be accessible until after it went live… ha. glad you figured it out! So glad you enjoy ☺️
I like your method of figuring the drawer bottom measurements! My method involved lots of math and consequently, lots of mistakes 🥴
I try not to use numbers as often as I can. Ha
I like your method for installing the drawer slides. I have a project started that has 2 drawers. I was unsure how to measure for and align the slides. I'm saving this video in my favorites for later review. Thanks again.
Glad it was helpful!
Love your stuff!
Just wanted to let you know there’s an “r” in drawers! 🤣 Kept trying to figure out what you were drawing 🖍️in this episode
Not where I’m from 😏
@@3x3CustomTamar - I kept wishing you'd say, "I'm going to draw this drawer first, so I make sure to get the size perfect." lol...I remember the first time I heard Norm Abrahams pronounce "drawer" with the silent 'r'. You're following in his footsteps in more ways than one. Great build and a great video. Hopefully my content here on CZcams will be up to this level some day.
@@rolandgdean when I was a kid I read a book about a magic drawer… I was very confused at the end because there was no character who drew anything… 😂
@@3x3CustomTamar lol...that is gloriously brilliant! I grew up Southern with a Cajun mother and MANY things and stories her family told confused me as a child...so I understand...lol.
I have to say this was the best video I’ve seen that best explains how to size, align and install drawers and their runners. Others and there’s been many, have left me confused but now I feel I could give it a go. Thank you 😊 🙏🏻
That’s awesome to hear!
I love the trick of your scrap piece to set the height of the drawer rails. gonna steal that for next time I make drawers
Definitely makes it easier!
Hi Tamar. Great work as always. Just an idea, you should make a little stand that connects to the vacuum boom arm of your table saw to hold your plans and make a little place for your pen as well to mark off stuff.
Great idea!
lol youre like great ill add it to the 150 other things i have to get to doing haha. i hope you know, people like you and a few other makers have truly inspire me to get into woodworking. My ad and i are currently working on creating a workshop on the side of their house. Your growth and progress is fun to watch. Thank you for everything and how sweet youve been @@3x3CustomTamar
GREAT project Tamar. We always pick up a tip OR trick on every download. Thanks! !! !!!
Awesome to hear! Thanks!
Simply once again a first class work and video. Thanks also for the wonderful desktop work.
Best regards from Germany
Tom
So glad you liked it. Thanks!
Looks good.
I bought a Domino after watching you use one ages ago.
Love it .
I really enjoy your videos 😊
Pete Australia 🇦🇺
Awesome. I am obsessed with it!
Très belle réalisation,c’est du très joli travail, bravo, à bientôt salut Jeannot ⚒😉
Thanks so much!
Amazing project beautiful and you make it seems easy to build. I like the way you give us the instructions and tips and even for my poor English level it's easy to understand. Super 😊
Awesome to hear! Glad you enjoyed!
FWIW, the dust collection on the Kreg 720 Pro is absolutely superb.
Beautiful! I love seeing all the unique tricks you've accumulated over the years.
Thanks! Always learning!
At the price of postage stamps today, you maybe should have included a combination dial lock on that thing.... like, a bank vault style. ;) NIce video - always a good watch !
Haha maybe hide them in the super secret portion of this desk. Thanks! Glad you liked it
I missed your cabinet videos and hearing “draw” so much :)
More to come!
Just keep saying “drawers”. Gets me every time :)
That is one cool cart...and with the curved desk...👌
Thanks so much
Best part of the office is the folding chair.
Truth.
most excellent...! love the video, tamar...! very impressed with how far you have come with your videos and woodworking skills... you are an inspiration to all woodworkers (male and female)...! 👍
So glad you liked it!
you managed to build exactly what my next project is going to be 😆 this is so sick!
Awesome. Have fun with it!
That is a great looking desk. Love walnut. You're brave using a paint brush instead of a roller on the rolling cabinet. No wonder you don't like painting ;-). I've generally stopped marking for the Domino's middle holes, but instead use the cross stops (I have a DF 700, so maybe they're not as handy on the 500). Much quicker, and more accurate. Fun to watch the cabinet come together.
Haha I hate using a roller too 😂
I feel like biscuits are perfect for drawers like this. No need to align and then screw it in place. Just clamp and done. Nice thing about screw is that you dont need to clanp though
You could use pinch sticks to measure the inside distances. They are perfect for it and so easy to make.
Tamar, I hope you’re not offended but I find your combination of extraordinary woodworking acumen, gregarious personality, and “girl next door” looks highly attractive! 😂
Great job, looks great; I'm with you on disliking painting, I found there are 2 things in life I hate--and painting is both of them!!
Literally the worst.
Very slick!! Hoping I'll find time to attempt something half as nice as this soon!
Glad you like it! It was a fun one
Nicely done. Love all your videos. Our new SawStop just arrived yesterday. Cannot wait to get to work.
Have fun with it! Such a great saw!
Awesome job Tamar! I love your instructions on making the drawers. Thank you!
Wil
Thanks so much 😊
That looks great with the black accents.
Thanks so much! Hated the painting but worth the effort. Ha
Every time you say "draw" I feel like I'm watching New Yankee Workshop!
Ha. I hear that a lot
Love the way you install your drawers. I’m going to try this next time. Cheers!
I used to hate drawers. Not anymore
I enjoyed the "clank" as the tester hit the floor :)
Haha. Glad you noticed it 😉
Yes! The return of "Draws"!
😂
Great, useful project. Thanks for posting, and thumbs up.
Glad you liked it! Thanks!
Drawer! 😂 love this channel!
😂
excellent work, kid!
love the walnut...gives it a mid-century vibe...very cool
peace
Thanks so much! That’s what I was going for 😉
I envy your workshop and your talent, it's cool to look at such a master.
☺️☺️
Turned out great as usual!
Yay, thank you!
For all those people talking about “draws”, i’ld suggest you to make the next video in french.😂
Even in a cloudy🌧️morning, your video is the sun☀️in my day❤️
Haha glad to brighten your day!
This looks really clean and solid! Wel done!
Thank you! Cheers!
The desk is really nice. Love your videos!
Also, the spacer trick is literally so simple and genius I felt really silly never having thought of that
Glad you like it!
I haven’t built drawers yet but you gave me confidence 👍
Do it! They’re not so bad
I'm amazed that SawStop let you show a non Festool track saw in your video. :)
Well… they didn’t send me one to use… soooooo… 😂
@@3x3CustomTamar lol absolutely fair! :)
Amazing video thumbnail. You have got that composition nailed!!!!
Haha I was excited when I saw that shot
Great job, nicely made 👍👍👍👍👍
Thank you very much!
The more I heard you say "draw" the more I started to distinguish other subtle differences in how you speak. I don't know how i didn't notice while watching a lot of your other videos 😂. Love your content and your accent is cool 😎
Yes. I have a New York accent because I was born and raised in New York. 👍
Native New Yorker! Go Cuse!
Great build too btw!
I just have to smile when you say Drawer-----:) I had a friend from New Jersey that said Drawer the same way. Great video !
Haha everyone I know says it like me
I too love the way you say drawer! Seriously, I would like to hear some insights on how to size drawers vertically when designing furniture. Thanks.
@@markbailey350 vertically? I knew how tall the cabinet needed to be to fit under the desk. I knew how tall the bottom drawer had to be to fit files. I divided the rest in 2 🤷🏻♀️😂
Nice design and an informative video. Thanks, Tamar.
Glad you liked it!
I moved and am building a workshop again. Your file cabinet, with minor tweaking of drawer sizes, will make a great little workshop storage cabinet that fits under some of the work tables. Thank you. @@3x3CustomTamar
By watching this video, I’m procrastinating installing my cabinet drawers 😂
Noooo! Go build your cabinet! Ha
That is a gorgeous desk!!! It looks so modern and has such a unique design. Great job and I love the secret compartment. No doubt your kids will find your candy stash in no time though! Thanks for another great video and BTW, I'm loving my 6-in-1 trim router jig!
Haha I havnt showed them the video in hopes that they won’t find it 😂
I’m just here for the draws
Great video. I will look at the FREE plans and I am sure I will have lots of questions.
Haha good luck!
Always great tips in your videos. It's the small things you figure out and pass on that add up to great project videos. And it's always a good video when we get to hear you saw "Draws" over and over.
😂
Drawers are back!!!!! 🤣 Great job as always.
🙌🙌🙌
Drawwww 😂 every time! Great video
😂
smart work, good and beautiful results🌷
☕
Thank you! Cheers!
This is beautiful!
Thanks!
Great job Tamar, you make it look easy 👍👍
Thanks! This cabinet was easy. This desk had its challenges. Ha
When I seen the video I knew I would hear drawer many times :) always love your videos!!
😂 thanks!
@@3x3CustomTamar I have some dear friends and a special aunt that says it the same way, I just love hearing :)
On a lot of vids. The comments can be “Oh well your using Festool” if I had the cash there is nothing other than Festool, that I would purchase. You get what you pay for. Festool and a couple of other manufacturers are the top quality. I don’t have the requirements to use Festool etc. I don’t do enough work to pay the price. But sometimes I think wow if only I could afford to use Festool. Lovely tools.
But even if the tools are top line! You still need the ability/Knowledge/ Skill to use them.
Lovely vid, Tamar ! You are not uploading enough vids.
I messed something up real bad on my sawstop yesterday… just because it’s a higher quality tool doesn’t mean everything will be perfect. You still need to know how to use the tools. Those comment always made me laugh.
And I’m trying to upload more. But I have 3 kids who are getting bigger. Which means bigger problems! They will always come first.
Beautiful. Alltough nobody has paper files anymore 😅
We do… my husband is old school 😏😂
again you make it look so easy LOL fantastic Job keep those video's coming my friend
Thanks! I’m trying! Ha
This looks sooo good! Great work!!
Thank you so much!!
Cue the “draw” comments! It was more common to hear this when I lived in NJ than my current home below the Mason-Dixon line, so I love to hear it…reminds me of home. Of course the woodworking in this video is great, as ever…I’m not just here for accent porn! 😂
😂😂😂 it’s funny that ppl have never heard this pronunciation before.
@@3x3CustomTamar You’re the last of a dying breed. There has to be someone who’s the last to have this accent. Pretty soon linguists will be contacting you to do interviews to preserve the legacy of your ancient dialect.
Really good work 👏👏👍👍
Thanks a lot 😊
@@3x3CustomTamar I became your fan watching the Records cabinet you made. that was some really out of this world stuff. The resilience, persistence, “evaluating life choices” and finally when the platter got spinning, i was down right 🤯 👏👏🙏
Any plans for a project that utilize 20 / 30 or 45 deg.angle Joinery ? This seems to be the least addressed type and everything I've seen are for small joints like drawers vs larger pieces that would need strength .
Great idea
Thank you! Cheers!
Another great video!
Glad you enjoyed it!
Somebody needs to teach this lady how to say drawer
Somebody needs to understand the concept of an accent
Very nice looking cabinet. Umm this is unrelated but I really like your floor. What's it called?
The black paint and walnut combination really stands out. A few thoughts: didn't you consider mitered edges for the module? You have a domino cutter anyway, and although assembly is more difficult, you wouldn't have to struggle with putty afterwards. Visually also more attractive as you don't have plywood end grain. For this kind of furniture I would even consider MDF rather than plywood.
I considered edge banding it. Then I forgot… ha.
5:30 cut grooves, was the depth of cut the same in all grooves? You can use "I.D. O.D" , welders technique
Depth is the same yes. But I don’t know what that measurement actually is. I just line up the blade to a height that “looks good”
Alat2 kerja yang sangat bagus. Aku sangat ingin memilikinya 😍
Ohh interesting... quite a lot of good techniques here.
Glad you think so!
Awesome work!
Thank you! Cheers!
That's Awesome!!
Thanks!
Good morning Mrs Tamar , you're lucky to be able to get away with such a small filing cabinet , in my home office it's a 4 drawer legal size
600 pound beast that's almost full 😿 / btw - now your kids know where your secret candy stash is 13:52 - and you've probably been robbed
and cleaned out by now 😹😸 , Happy Caturday 😸😺
Haha I was going to show my youngest this video. Then decided I wanted to keep that secret spot a secret 😂
Enunciate. Ain't nobody know what druhs are 😅
Now just a minute here.
Are you saying NOT to bring a Square to Friends homes?
Mind blown 😮
You do you… 😏😂
It’s a beautiful build and the black paint looks like it turned out very smooth. Is there any reason you didn’t edge band the top and bottom of the carcass?
Thanks! Yeah… laziness. Ha.
awesome build. I have wanted to make some thing similar to store airbrush paints. I am curious how you came up with the draw heights? is there a generally accepted height, or do you decide how many drawers you want and divide the space evenly?
Well… I knew I needed the bottom drawer to be tall enough for files. And I knew this needed to fit under the desk. So after those 2 things were works out I could just divide what was left over.