Great help! Im bagging my six four and the bag kit with shock relocation mounts didnt have very good instructions. Glad to see how you did it. Pretty much how i thought.
thanks for the video, you are the only person that has given me any idea how to go about this, I have a Lada 2102 estate with air ride, the original shocks were inside the springs so I will have to fabricate new mounts thanks for your advise best regards Keith
how did you measure how high the mount needed to be for your truck to lay flat on the ground, where did you measure and from what points to determine how high the bracket needed to be
Great help! Im bagging my six four and the bag kit with shock relocation mounts didnt have very good instructions. Glad to see how you did it. Pretty much how i thought.
Super helpful. I did a rear lower relocate to run huge shocks with lots of travel in the rear but haven’t got to my fronts yet.
A massive help! I'm about to start bagging my 2011 ram single cab and I've been running around the internet trying to figure this out. Thanks !
Your welcome
thanks for the video, you are the only person that has given me any idea how to go about this, I have a Lada 2102 estate with air ride, the original shocks were inside the springs so I will have to fabricate new mounts thanks for your advise
best regards
Keith
Thanks for cking out my video did you see the second one with the level sensor?
@@starfirerider not yet, but I will have a look although my system is not that complicated just up and down front and rear
regards
Keith
Thanks alot ! Working on a 55' Buick two door hardtop w/ 401 nailhead
thanks brother,bagging my truck this weekend and I was wondering where the shock relocation bracket went,big help,appreciate it
Glad I could help 😌
Dang Mike your a fuckin genius!
Ive been trying to figure out what to do to add front shocks, thankz!
How the hell did you bolt down the bracket if the frame is inaccessible
I wana do same for my 88 silverado c3500 what shock best for it gonna fabricate my brackets
I’m do the same g.... thanks for the idea
Dude. Thank you very much for this. I have 70 impala. What year econoline is that shock for?
Glad I could help
what about tyre?
Thank you for the video, my 03 silverado is going to the ground ..
Glad I could help.
Yo thanks for the video big help bro big help
Glad I was able to help
Do you know that part number for the shocks
How much turning radius did you loose?
I probably lost about 25%
how did you measure how high the mount needed to be for your truck to lay flat on the ground, where did you measure and from what points to determine how high the bracket needed to be
you can use some wire and compress the shock then install the bracket and make your marks on the frame to mount the bracket
@@starfirerider thank you