Video není dostupné.
Omlouváme se.
How to fit a Fiat Ducato underslung spare wheel carrier, wheel & tyre yourself
Vložit
- čas přidán 27. 10. 2023
- We highly recommend Halmerend Wheels & Tyres in Stock-on-Trent for purchasing the wheel, tyre & carrier as the service was exceptional!
www.halmerendwheelsandtyres.com
I’m glad someone did make this video. I had the apparatus already fitted to my van but found it fiddly to attach the wheel. I wanted to confirm I was doing it right. I found it difficult to get the carrier through the centre hole. I think it helps to first tilt the wheel so it’s sort of 45° supporting it on a bit of wood or similar to undo the little securing bolt then remove the carrier through the hole. The air was blue before I worked it out. The video helped a lot. Thanks for sharing!
We had no issues at all and was pleased we didn't have to jack the van up as plenty of room underneath. Glad you got there in the end and our video helped. Happy travels and at least you have a spare if you get a puncture or blow out now.
Brilliant video,thanks for sharing. Just received my kit and now ordering my xtra bolts. Thanks again for all your help.😊
Thank you! 😀 You will appreciate a spare tyre more, especially if travelling around Europe. Good luck with it.
@@Miles_and_miles2023 Going for the NC500 next year. Don't want to get stuck in the Highlands with a puncture and no phone signal .
@@mikekarpaty3871 We went to Europe over Christmas which is the main reason we put one on our vehicle. We also want to do the NC500 but might not get round to it this year but it looks amazing!
Can't wait. Maybe we will pass each other at some time. Best of luck 😊
Great video, looks like a simple job.
I am converting a Fiat Ducato which has no spare wheel carrier so just ordered one from the same company.
Thank you! Yes, it was definitely easy enough to do so you should have no problem. Good luck with your van conversion.
We have a Kea 90/2 would like this on ours thanks for posting and showing us how its done.
You are very welcome. It is easy to do and doesn’t take that long to do. Any problems, let me know. Hope you like your Kea 90 as much as we do!
@@Miles_and_miles2023 Love our 90 getting a tow bar fitted next costing twice what our other t bars have cost due to the chassis extentions needed.
Very interesting, thank you.
Brilliant vlog.Nice and simple and my next job.I think I'll get a protective cover for the wheel and tyre as well.
Thank you! It sounds like a good idea with the protective cover. Good luck with it and hope you find it easy.
So job done and for the benefit of others, I'd already had a tow bar fitted and encountered a couple of issues. The 1st one was that one of the brackets holding the winding mechanism to the chassis was fouling one of the strengthening plates added to the chassis for the tow bar. This was easily rectified by taking a small notch out. The other problem was that the plate also prevented me from inserting the wind down tool into the housing. The only way around this was to fix the bracket holding the winding mechanism with a single rather than 2 bolts which allowed it to pivot down just enough to insert the bar. While not ideal, the bracket is taking only the weight of the mechanism so very little in reality. It doesn't move when operating the winder so I'm comfortable it's secure enough.Hope this helps others. Got to get a wheel cover now. Can also recommend Halmerend
Fantastic! Sounds like your job was more work so well done for doing it. Will definitely come in handy if you ever get a puncture and peace of mind! Happy travels!! @@GedandMichele
@@GedandMicheleзачем вам колпак, чтобы грязь собирать и ржавчина была?
Hello again, what size are the supplied bolts please? The 3 for the winch? Thank you
Brilliant thanks. What size are the 100mm bolts please?
These are M8.
Great easy to follow video, hopefully I find it the same 😁 Would you mind confirming the bolt sizes please, 3 x 100mm M8? & how many ? M8 x 20mm. thank you
Good luck and hope you find it easy enough. When ordering the carrier from Halmerend, they supplied the bolts for mounting the wheel carrier but they didn't supply the bolts for the bit you would attach your spanner to when winding down the wheel, although it was all pre-drilled. We, therefore, purchased 3 x 100mm M8 nut bolts. Hope this makes sense?
@@Miles_and_miles2023 Thank you for coming back to me, I ordered the carrier from eBay. Haven’t received it yet, it’s a new one but it doesn’t show any bolts so I thought I’d get some so I’m ready. So far I’ve got 10 M8 x 20mm and will now get 3 M8 x 100mm. Thank you 🙏
I am sure you will have no problems but if you get stuck, just let me know.