ViaBecs Expert
ViaBecs Expert
  • 128
  • 1 460 075
NEW Stereo in my 2014-2019 Toyota Highlander! Wireless Apple CarPlay #ViaBecs
This is a video on recent upgrade on the Toyota Highlander 2016. This ViaBecs Android head unit is holding up very well with lots of features.
The OEM backup camera works fine, and all of the steering wheel buttons work.
ViaBecs Toyota Highlander 2014-2019 Stereo on Amazon: amzn.to/3S0JSzS
This is by no means a Highlander-only solution though, these direct-fit models are available for a variety of vehicles. Check out amzn.to/3XikLby or Amazon to find a compatible model for your car.
-----------
A huge thank you to Fix It Rick for his amazing video! Be sure to follow his CZcams account for more great content and helpful tips.
www.youtube.com/@dgoulian
#android #carplay #highlander #ViaBecs #Toyota #androidauto #headunit #carstereo #review
zhlédnutí: 268

Video

How to Change Car Launcher Theme and APP #ViaBecs Radio
zhlédnutí 162Před 14 dny
ViaBecs try our best to release the solution for the Android head unit. if you want to know other functions, please leave your comment.
ViaBecs APPLE CAR PLAY / TOYOTA HIGHLANDER 2014-2019 10.2" STEREO INSTALL
zhlédnutí 560Před 28 dny
This video shows how to install a Viabecs 10.2" Android / Carplay touchscreen car radio in a 2016 Toyota Highlander. This stereo is suitable for Toyota Highlander 2014, 2015, 2016, 2017, 2018, and 2019 model years. This is the ViaBecs car stereo and features Bluetooth, WIRELESS Apple CarPlay, and WIRELESS & Wired Android Auto and we will be retaining the factory steering wheel volume controls, ...
How to adjust screen brightness and change themes.
zhlédnutí 315Před 2 měsíci
How to adjust screen brightness and change themes.
Guide for Installing AHD Car Reverse Camera on Your Android Radio #ViaBecs
zhlédnutí 2,2KPřed 2 měsíci
#1: Please verify if your monitor is compatible with the AHD format before buying the ViaBecs AHD backup camera. Do not compatible with factory radios or monitors that do not support AHD video signal format. #2: Here's a quick summary of the installation steps: Step 1: Connect the reverse camera's male RCA cable to the female Camera VIN cable on your head unit. Step 2: Connect the camera's red ...
How to Choose Map APP as Navigation Application on TS10 Head Unit
zhlédnutí 207Před 3 měsíci
Problem: Carplay volume is lower than the system default volume It’s because the navigation software is selected to Tlink.
How to Shuffle and Repeat Music in Music App
zhlédnutí 228Před 5 měsíci
ViaBecs try our best to release the solution for the Android head unit. if you want to know other functions, please leave your comment.
How to Connect USB DVR Dash Cam to ViaBecs Android Head Unit
zhlédnutí 1,1KPřed 6 měsíci
ViaBecs try our best to release the solution for the Android head unit. if you want to know other functions, please leave your comment.
How to Use Apple Carplay or Mirror Link Wirelessly on Tlink5 APP - ViaBecs
zhlédnutí 3KPřed 6 měsíci
📱 Wireless Connectivity Made Easy with Tlink5 App | Apple CarPlay & MirrorLink Tutorial 🚗 Welcome to our step-by-step guide on how to seamlessly connect your smartphone to your car's infotainment system wirelessly using the Tlink5 app. In this tutorial, we'll walk you through the process of connecting both Apple CarPlay and MirrorLink, making your driving experience smarter and more convenient....
Upgrade Your 2014-2019 Toyota Highlander Stereo System with ViaBecs Wireless Carplay Radio
zhlédnutí 16KPřed 6 měsíci
How to install Android-based 10.2-inch touchscreen display stereo in Toyota Highlander 2014, 2015, 2016, 2017, 2018, and 2019 model years without original Stereo. This video also includes dash trim and stereo removal, wiring, complete installation, and testing! This is the ViaBecs car stereo and features Bluetooth, WIRELESS Apple CarPlay, and WIRELESS & Wired Android Auto and we will be retaini...
How to Change Wallpaper on YT5760B Car Radio
zhlédnutí 279Před 6 měsíci
ViaBecs try our best to release the solution for the Android head unit. if you want to know other functions, please leave your comment.
How to Install ViaBecs Wireless Apple Carplay On 2019 Toyota Highlander
zhlédnutí 2,5KPřed 7 měsíci
In this video, it shows you how to install ViaBecs 10.2" Car Stereo Wireless Apple CarPlay on the 2019 Toyota Highlander XLE This Android head unit specifications: 🚙 CPU: 6G 128G, 8-core (2A75 6A55), 1.8GHz 🚙 Supports online system and MCU updates (OTA) 🚙 Built-in DSP BU32107 with 48EQ 🚙 Wireless Apple CarPlay and both wireless & wired Android Auto support and Mirror link 🚙 Bluetooth version: B...
update system online, and then set up "Switch the steering wheel up and down"
zhlédnutí 846Před 7 měsíci
ViaBecs try our best to release the solution about Android head unit. if you want to know other functions, please leave your comment.
Disconnect CarPlay & Switch Mirror Link on Tlink5 / Zlink5 App
zhlédnutí 2,8KPřed 7 měsíci
10-inch 6GB 128GB Wireless Carplay & Android Auto for Toyota Highlander 2014-2019 Learn more about this product at the following link: amzn.to/3S0JSzS Amazon ViaBecs Store: amzn.to/3XikLby
Test the Night Vision & Waterproof of ViaBecs Car Reversing Camera Feature
zhlédnutí 114Před 8 měsíci
Test the Night Vision & Waterproof of ViaBecs Car Reversing Camera Feature
How to Fix No Signal From Backup Camera on Aftermarket Android Car Radio.
zhlédnutí 52KPřed 8 měsíci
How to Fix No Signal From Backup Camera on Aftermarket Android Car Radio.
How to Set Up Canbus on TS10 Android Car Radio
zhlédnutí 16KPřed 9 měsíci
How to Set Up Canbus on TS10 Android Car Radio
How to fix the 'Android upgrade' button not working
zhlédnutí 622Před 9 měsíci
How to fix the 'Android upgrade' button not working
How to Update Your Android Radio Firmware By USB Flash Drive
zhlédnutí 20KPřed 9 měsíci
How to Update Your Android Radio Firmware By USB Flash Drive
How To Set Reversing Camera Guidelines on YT5760B Head Unit
zhlédnutí 3,7KPřed 9 měsíci
How To Set Reversing Camera Guidelines on YT5760B Head Unit
Time and Date setting in YT5760B Android Car Stereo
zhlédnutí 5KPřed 9 měsíci
Time and Date setting in YT5760B Android Car Stereo
Update System on TS10 Head Unit via USB Flash
zhlédnutí 4,7KPřed 10 měsíci
Update System on TS10 Head Unit via USB Flash
Connect SIM Card to get 4G internet on Head Unit
zhlédnutí 1,2KPřed 10 měsíci
Connect SIM Card to get 4G internet on Head Unit
How to reinstall the Zlink5 app?
zhlédnutí 8KPřed 10 měsíci
How to reinstall the Zlink5 app?
Rechoosing Canbus Option for Resolving CRV Right View Camera Issue
zhlédnutí 330Před 11 měsíci
Rechoosing Canbus Option for Resolving CRV Right View Camera Issue
Use 4G on Head Unit When Connect to Wireless Carplay
zhlédnutí 399Před 11 měsíci
Use 4G on Head Unit When Connect to Wireless Carplay
How to Download the updated file of Android Car Stereo Firmware via Computer?
zhlédnutí 16KPřed rokem
How to Download the updated file of Android Car Stereo Firmware via Computer?
ViaBecs | Part 2 10.2" Wireless Carplay Stereo Upgrade | 2007-2013 Toyota Tundra, 2008-2018 Seqluoia
zhlédnutí 3KPřed rokem
ViaBecs | Part 2 10.2" Wireless Carplay Stereo Upgrade | 2007-2013 Toyota Tundra, 2008-2018 Seqluoia
ViaBecs | Part 1 How To Remove Factory Radio On 2007-2013 Toyota Tundra, 2008-2018 Toyota Sequoia
zhlédnutí 13KPřed rokem
ViaBecs | Part 1 How To Remove Factory Radio On 2007-2013 Toyota Tundra, 2008-2018 Toyota Sequoia
How to Install Covers for Wheel for Blinds On Toyota Rav4 Dash Frame
zhlédnutí 101Před rokem
How to Install Covers for Wheel for Blinds On Toyota Rav4 Dash Frame

Komentáře

  • @MasterStinger5
    @MasterStinger5 Před 8 minutami

    Hi, I have a android unit for mercedes b 180 (2012). The screen not switch to camera when put in reverse. The screen have a GND and CCV 12V line. I connected the CCV 12V wire with the red one from the reverse lamp. Any idea why its not working?

  • @christopherrussell4128

    Everything is working well. The only thing I cannot figure out is why the volume on apps like Netflix, TikTok etc is very low. I turn the volume up all the way on the viabecs, but it’s not turning up that loud? The music and maps work very loud. Any fix for this?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      Q4: When the following situations occur, please review the settings of the Navigation Application. Case 1: Listening to my message through Apple CarPlay, I had to turn the volume up a lot. When I switched back to FM, it was so loud. Case 2: The volume is too low when Siri speaks. Case 3: The aftermarket subwoofer is working when the radio is on but not when Apple carplay is on. A: Setting APP--General--Navigation Application Settings--Google Maps or another maps app Video: How to Choose Map APP as Navigation Application czcams.com/video/J8sqPj1Nl08/video.html

  • @christopherrussell4128

    Did you install the protection glass? Did you first remove both layers of plastic on the screen?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      We sent a 10-inch tempered film with the package. you need to remove both layers of plastic on the screen before install temmered film. ”I applied the screen protector but there are big bubbles that I can't get out. Please help! ” Using a credit card or a similar object: If the bubbles persist, you can try using a credit card or a similar flat, rigid object to push the bubbles towards the nearest edge of the screen protector. Use gentle, even pressure to avoid scratching the protector or device screen. Heat method: Sometimes, using a hairdryer on low heat can help soften the adhesive of the screen protector, making it easier to manipulate and remove bubbles. Hold the hairdryer a few inches away from the screen protector and move it in a circular motion for about 15-20 seconds. Then, press down on the bubbles as described above.

    • @christopherrussell4128
      @christopherrussell4128 Před 2 dny

      @@viabecsexpert5681 I only removed one layer of plastic when putting the protective glass on. It looks great. There was a hard layer of plastic on the screen under the soft thing plastic wrap, but that hard plastic protection did not come off. Should I remove everything and reinstall the protective glass or just leave it?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      @@christopherrussell4128 If the touch is ok, you can keep the hard plastic protection.

    • @christopherrussell4128
      @christopherrussell4128 Před 2 dny

      @@viabecsexpert5681 Thank you. How can I get another screen protector to fix it? Theres dust trapped underneath the factory hard layer of plastic, and I put the screen protector on since the instructions didn’t say to remove the hard plastic layer. Is it possible to get a replacement of the protections glass?

  • @christopherrussell4128

    When do you install the screen protector? Did you remove both layers of plastic on the screen first?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      We sent a 10-inch tempered film with the package. you need to remove both layers of plastic on the screen before install temmered film. ”I applied the screen protector but there are big bubbles that I can't get out. Please help! ” Using a credit card or a similar object: If the bubbles persist, you can try using a credit card or a similar flat, rigid object to push the bubbles towards the nearest edge of the screen protector. Use gentle, even pressure to avoid scratching the protector or device screen. Heat method: Sometimes, using a hairdryer on low heat can help soften the adhesive of the screen protector, making it easier to manipulate and remove bubbles. Hold the hairdryer a few inches away from the screen protector and move it in a circular motion for about 15-20 seconds. Then, press down on the bubbles as described above.

    • @christopherrussell4128
      @christopherrussell4128 Před 2 dny

      @@viabecsexpert5681 How can I get another screen protector to fix it? Theres dust trapped underneath the factory hard layer of plastic, and I put the screen protector on since the instructions didn’t say to remove the hard plastic layer. Is it possible to get a replacement of the protections glass?

    • @viabecsexpert5681
      @viabecsexpert5681 Před dnem

      @@christopherrussell4128 Do you order ViaBecs head unit? if so, please send me the order number to check first. vbtecsa1us@gmail.com

  • @sharkxraptor6814
    @sharkxraptor6814 Před 3 dny

    Thanks this video really help solve my problem

  • @Sakalakabaka
    @Sakalakabaka Před 4 dny

    Hi, ac isn’t blowing cold air. Any solution for that?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      Step 1, please check the connection of AC control harness. Step 2, Please check wether you choose the correct canbus option. note: maybe your head unit doesn't built-in CHANGYUANTONG canbus. so the canbus option is different.

  • @tieanlewis7534
    @tieanlewis7534 Před 4 dny

    Thank you 🙏

  • @christopherrussell4128

    I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      How to set up Electric rear door S1: connect the head unit with your Phone hotspot first. Press Settings -- Factory -- Select Models -- password is 123456 -- Model choose. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipPSdZluExNn49uYxxjupg0RQbeIEJywMuFLudNx

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      Here are some door lock settings. I'm not sure if this is the information you need. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipNuyn5IbDM-bcwUlHhs9PcYM2D92iiLW9HlqvRm photos.google.com/u/1/search/_tra_/photo/AF1QipN1SfGlmm9rofEYDk_WQgUTBRpRMSwqe2qgLkQL

  • @christopherrussell4128

    I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.

  • @christopherrussell4128

    I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.

  • @christopherrussell4128

    I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      How to set up Electric rear door S1: connect the head unit with your Phone hotspot first. Press Settings -- Factory -- Select Models -- password is 123456 -- Model choose. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipPSdZluExNn49uYxxjupg0RQbeIEJywMuFLudNx

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      Here are some door lock settings. I'm not sure if this is the information you need. Photo: photos.google.com/u/1/search/_tra_/photo/AF1QipNuyn5IbDM-bcwUlHhs9PcYM2D92iiLW9HlqvRm photos.google.com/u/1/search/_tra_/photo/AF1QipN1SfGlmm9rofEYDk_WQgUTBRpRMSwqe2qgLkQL

  • @Codebluesituation
    @Codebluesituation Před 6 dny

    This worked for my head unit! Thank you ! :)

  • @christopherrussell4128

    I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.

  • @christopherrussell4128

    I am debating between this and an Apple CarPlay module. Once this is installed, is there an firmware update that will allow settings within the original OEM head unit to be customized? As an example, the OEM head unit has a setting where the door locks can either all open when you use the key fob or the driver door only with the key fob or the smart key on the door handle. Changing the level of the back door hatch in the cargo area can be done through the OEM head unit daytime running headlights can be turned on or off within the OEM head unit. These are just some of the major ones that I would not want to lose access to, I did run a test where I took the negative battery terminal off of the battery to see if the settings stayed how they were programmed or if they would reset and they did stay the same as they were originally programmed in the head unit. I’m wondering if you guys cannot provide access to these essential vehicle customization OEM options if we just have to set up the vehicle the way that we want prior to putting your aftermarket head unit in and hope that the settings never revert back to a factory reset, as I don’t know where that information would be stored if it’s not stored Within the OEM head unit? As an example if I have all of the door locks set to open at the same time through the OEM head unit and I put your head unit in will that setting remain or will it revert back to the factory setting of just the driver door openingwith one push of the unlock on the key fob? If all of the functions that we set up in the original head, unit will remains stored on the main computer of the vehicle. I may be OK with that, but if they could ever be wiped out while your head unit is in and the only way I would have access to change it back is to reinstall the original head unit that is just unacceptable to me as I’m locked out of way too many features on this vehicle, I think you guys need to address this publicly as everyone needs to know what they are getting themselves into and quite frankly you should create a firmware update or an app to address this issue if you don’t have an answer. Please let me know as I would like to purchase your unit, butit’s not acceptable to lose all of those features. Time is of the essence thank you for your response.

  • @kokovin6808
    @kokovin6808 Před 8 dny

    What is the use of FM1 and FM2 on the BAND? Does it mean I can preset different station for each FM BAND? 18 + 18 ?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      FM1: band: 87.5--108 MHz FM2 band: 87.5--108 MHz AM band: 520--1720 KHz yes, you can reserve 18 stations for each FM1, FM2 or AM BAND. (18+18+18)

    • @kokovin6808
      @kokovin6808 Před 2 dny

      @@viabecsexpert5681 i tried saving 18 stations to FM1 but when I switch to FM2, same 18 saved stations no changes as if both FM1 and FM2 share same 18 stations only.

  • @anndennis4201
    @anndennis4201 Před 8 dny

    I purchased a used 2013 Rav 4 and it works great except for the head unit. It won’t connect to Bluetooth and the navigation, hands free phone, don’t work. The regular radio, XM, backup camera and auxiliary port all work but I really wanted to use all the features. Should I try to find one at a salvage yard or eBay? Also you didn’t test yours to make sure all the features worked such as Bluetooth and navigation. Did yours have that? Thanks in advance.

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      our head unit can support Bluetooth call, hands free phone. Video: How To Connect iPhone To Car Stereo Via Bluetooth czcams.com/video/g8Hfs591Mno/video.html

  • @Digital.Photography

    A Chrysler dealer installed a back up camera on my 2015 300C. It works sporadically, sometimes it say "unavailable ", but stops working in early spring, and stays off until Autumn. However, sometimes it will work in hot weather and other times it won’t work in winter months. First time it malfunctioned was in 100° weather and I was parked with camera lens facing into the sun. They want more $ to diagnose the problem than what they charged me to install it. What should I look at first to diagnose problem?

  • @Digital.Photography

    A Chrysler dealer installed a back up camera on my 2015 300C. It works sporadically, sometimes it say "unavailable ", but stops working in early spring, and stays off until Autumn. However, sometimes it will work in hot weather and other times it won’t work in winter months. First time it malfunctioned was in 100° weather and I was parked with camera lens facing into the sun. They want more $ to diagnose the problem than what they charged me to install it. What should I look at first to diagnose problem?

  • @jamiegraf7350
    @jamiegraf7350 Před 8 dny

    My control functions on the steering wheel work but the Next/Previous functions to change songs are backwards. Any thoughts?

    • @jamiegraf7350
      @jamiegraf7350 Před 8 dny

      I even changed the steering wheel functions on the stereo itself so that Next=Previous and vice versa, but either way I set it up, the functions are reversed

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      If the up and down steering buttons are switched, please try to close or open the option of "Switch the steering wheel up and down" to test. S1, Please open the setting app -- Factory -- Switch the steering wheel up and down. S2, Please open or close it to test. S3, Then click the "Restart" button to reboot the head unit to save the setting. photo: photos.google.com/u/1/search/_tra_/photo/AF1QipMEnwkdJnDN04ih4MiUxJBRu4xDrd9JaYT8n5Rv

    • @christopherrussell4128
      @christopherrussell4128 Před 2 dny

      @@viabecsexpert5681 Wouldnt this also flip the volume controls, then those will be backwards. I’m having the same issue as her.

    • @viabecsexpert5681
      @viabecsexpert5681 Před 2 dny

      @@christopherrussell4128 it can't flip volume controls. Is it only the volume control button that is flipped? Are the other square control buttons working properly? you can try to rechoose the canbus to test. S2: connect the head unit with your Phone hotspot first. Press Settings -- Factory -- Select Models -- password is 123456 -- Model choose. S3: Choose CanBox Brand: 03:Simple Soft --30:Toyota-- Models: 14:All New Highlander -- Config: Public Finally, press ok to save the settings. Then the head unit will update it automatically. Video: Set up the canbus option. czcams.com/video/oRcBn3C6uns/video.html

    • @christopherrussell4128
      @christopherrussell4128 Před 2 dny

      @@viabecsexpert5681 this worked thank you 🙏🏻

  • @EROS._X
    @EROS._X Před 9 dny

    Nos puedes compartir la actualización

  • @fvigz10_
    @fvigz10_ Před 9 dny

    Hello my friend! I have a problem with the junsun radio. My CarPlay stopped working after an update. It also has the reset button on the front, but as you say, it just resets. It does not go into factory recovery mode. can u help me please? im really tired with this issue.

  • @nickicenroad484
    @nickicenroad484 Před 10 dny

    I have an eonon M3BLA12 and stupidly changed the resolution to 1280. Now I cannot hit the keys right on the touch screen and cannot get to the confirm button to change it back. Does a hard reset erase resolution settings? Im struggling here

    • @viabecsexpert5681
      @viabecsexpert5681 Před 9 dny

      video: How To Fix Android Car Radio touch screen not working czcams.com/video/D-LrqsBTcO4/video.html you can Calibrate the touch screen and then try to change it back.

  • @christopherrussell4128

    It looks great, but how do you control many features in the vehicle that are controlled through the OEM head unit? Theres a ton of options that you really can’t go without that are accessible through the OEM head unit. Does this after market provide access to those options?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 9 dny

      Our harness can support factory steering wheel control, JBL amplifier, original backup camera, door display info, TPMS info (can't change TPMS unit). What other original features would you like to ask about?

    • @christopherrussell4128
      @christopherrussell4128 Před 8 dny

      @@viabecsexpert5681 There’s a multitude of settings inside the OEM head unit. As an example you can change lock settings, disable/enable day time running lights, and many other things. The brain of the vehicle is the OEM heading for settings. My question is, if I swap it out for your head unit, how would I ever access those features again?

    • @christopherrussell4128
      @christopherrussell4128 Před 7 dny

      Any response to this? Do we permanently lose access to door lock settings, day time running light disable settings, and the numerous other “vehicle programming settings” within the OEM stereo?

  • @bobbychong23
    @bobbychong23 Před 15 dny

    Any solution if turn on car the head unit is on but black screen.. When I switched the gear to Reverse the screen is turn on.. Have any solution for this?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 14 dny

      Solution 1: Please DISCONNECT YOUR BATTERY. then connect the negative cable and positive cable after 10 minutes. and test whether the car radio could be turned on. For safety purposes, always disconnect the negative cable first. Solution2: 1) Please find a pin to press the RST button (long press) until you see the light button flashes three times. 2) Then press the RST button 3-4 times in time unit the panel LED light on all the time 3) you will enter the radio recovery interface. If you can enter the recovery interface, please try to test whether the screen can work well after resetting factory data. here is the video on how to enter the radio recovery interface. czcams.com/video/fdkc4YBvS04/video.html Solution3: If solution1 and solution2 can't solve it, please unplug and unplug the PX6 chip and screen cable. How to remove the PX6 chip: czcams.com/video/XcjDclSEZ7s/video.html czcams.com/video/nBdAQVJXthU/video.html

  • @robertgaleano1479
    @robertgaleano1479 Před 15 dny

    Video format?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 14 dny

      Image format: JPG/PNG/JEPG/Bmp Audio format: MP3, ACC, FLAC, WAV, M4A, MP2, ARM, OGG Video format: MP4, 3GP, AVI, DVIX, FLV, MKV

  • @supermanrh3650
    @supermanrh3650 Před 15 dny

    How can i update to the latest android versión in this model?

  • @supermanrh3650
    @supermanrh3650 Před 15 dny

    Does It work in yt5760b?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 15 dny

      For the YT5760B version, you can remove the app from the main interface and replace it with your favorite software. Video: How to Change Wallpaper on YT5760B Car Radio czcams.com/video/0yo_MhYfn7g/video.html

  • @mrrodri1085
    @mrrodri1085 Před 16 dny

    How can you change the time?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 14 dny

      How to update the date and time Please car setting app -- Android Setting -- go to setting > system > date & time. you can check whether it turn on the option of "Automatic time Zone". you also can change the time zone manually. Then the date and time will be updated. if the date doesn't udpate after setting, please press the RST button to reboot the radio. video: Time and Date setting in YT5760B Android Car Stereoczcams.com/video/uFfjYHlVDzA/video.html

  • @IAmMajician
    @IAmMajician Před 16 dny

    Nothing happens when I hold 5 fingers on the screen...

  • @kiki-bz4gs
    @kiki-bz4gs Před 16 dny

    Thank you 🙏 exactly what I needed to know 😮

  • @paulbenjaminrooi4233
    @paulbenjaminrooi4233 Před 17 dny

    Good day, my vehicle already has a rear view camera installed in nto the rear view mirror, as it came out like that. I installed an android radio which has also a rear view camera function. My vehicle is a Kia Optima K5 2012 model. Can you please assist what I can do to change the view from the rear view mirror to the android radio.

  • @Kincseszegi
    @Kincseszegi Před 22 dny

    Thank you!

  • @brianburgos708
    @brianburgos708 Před 24 dny

    My volume goes down by it self. How I remove this update?

    • @viabecsexpert5681
      @viabecsexpert5681 Před 22 dny

      you can update the system first. you can try to reset the factory data. Please click the car setting > Android system > system > reset option > reset factory data Note: When you perform a factory reset, your device will be restored to its original factory settings. This means that all the data, apps, and settings that you have installed or changed on your device will be erased. After the reset, your device will be as it was when you first bought it.

  • @LivinginPlymouthJenSylvester

    Great video! Which model Highlander do you have? I have the Limited with the Birds Eye view - wondering if the it will display the same views.

    • @viabecsexpert5681
      @viabecsexpert5681 Před 23 dny

      Our Highlander can support factory 360 cameras, which activate when you put the car in reverse.

    • @willeverett8362
      @willeverett8362 Před 21 dnem

      I did it today, works with Birds Eye. There is two “yellow” video cords. You’ll do one of the two, the first one I chose didn’t work.

    • @viabecsexpert5681
      @viabecsexpert5681 Před 21 dnem

      @@willeverett8362 That is perfect.

  • @The591100
    @The591100 Před 27 dny

    Which model should I select for Honda accord 2006. I can’t see any Option . Can you please help me.

    • @viabecsexpert5681
      @viabecsexpert5681 Před 22 dny

      Please confirm which brand of CANBUS you have. you can try to select the canbus option to test. Canbus option: 11: Changyuantong -- 22: Honda -- 01: Accord 7 -- Public

  • @ahmedebenhassine2828
    @ahmedebenhassine2828 Před měsícem

    Why i dont have the same frame ? I m3an th3 same software?

  • @Jaredperalta
    @Jaredperalta Před měsícem

    Amazing! Worked on a 2007 Camry. Thanks 🎉🎉🎉

  • @abdulsshaik9640
    @abdulsshaik9640 Před měsícem

    My backup camera is working but grainy seems to be it needs resolution adjustment. I was trying to change the resolution but whats the password for that?

  • @RandyArdhani
    @RandyArdhani Před měsícem

    Can you share the file? I have the same headunit with you, YT_5760B

  • @JohnCena-zt3yl
    @JohnCena-zt3yl Před měsícem

    What if the reverse camera option isn’t available for me?

  • @DeliveryPower
    @DeliveryPower Před měsícem

    My rear camera doesn't work nor does the rear camera and I connected everything as it says in the manual you sent me. 😢

  • @Samuraiii12
    @Samuraiii12 Před měsícem

    Thank you, man. I almost lost my mind

  • @datboi856
    @datboi856 Před měsícem

    How do I keep the music playing in reverse. I don’t need my music to stop play to back up.

    • @abdulsshaik9640
      @abdulsshaik9640 Před měsícem

      in reverse settings, there is toggle button to increase volume

  • @TheSinTi
    @TheSinTi Před měsícem

    why is it so hard to find the files that are required for Android 13 update?

  • @ahmedfathi2519
    @ahmedfathi2519 Před měsícem

    Very helpful thank you

  • @ryanreynolds7771
    @ryanreynolds7771 Před měsícem

    CAN YOU HELP ME !!! I am at my wits end. I purchased a very expensive head unit for my 2011 Ford Mustang made by Raxiom from the company American Muscle which sells after market parts for Ford Mustang. I paid $700 for this piece of junk. I contacted American Muscle and they are of no use. The unit work about 2 yrs and the car is very low mileage and hardly used. The screen started slowly to only allow some screen buttons . Now I cannot change the time of tone or GPS I have to use the sync system that is factory to the car to play music through my phone. I even went to BEST BUY they know nothing. What can I do to fix this before I have to buy a whole new unit? CAN YOU PLEASE HELP ME PLEASE !!!!!

  • @Justnmikl
    @Justnmikl Před měsícem

    Thanks for the review and tutorial on the install. Because of your video, I purchased the same unit and it is working great! The only issue I am having is being able to hear my music from Spotify on the CarPlay in ALL the speakers. For some reason it is only playing in the front speakers. When I play the radio through the android section of the unit, all speakers are working and I am able to EQ the lows, miss, and highs. BUT, when I play music through the CarPlay section of the unit, the music is very flat with no EQ and it only plays through the front speakers. Have you had this same issue or do you know what I am doing wrong?

  • @Mullratte
    @Mullratte Před měsícem

    Why are my images all sideways

  • @merylmislang7185
    @merylmislang7185 Před měsícem

    How to change CAR MODEL display in my Head Unit YT5760B? The car model display is SUV but my car is TOYOTA HILUX PICK UP.

  • @308shy
    @308shy Před měsícem

    Any advice Touch screen not responding , I might have accidentally turned it off in the settings and now I can't get into settings, only the right side panel is working