Video

That new portion looks no more than 6' or 8' wide or it's two 6 foot sections

Is it better to put from inside or should I do from outside?

Thank you for the video! We're about to be hit by a huge hurricane next weekend and I was wondering how to cover my windows and it helps me a lot!

Awesome video

I’d definitely recommend to just biting the bullet and do both doors, and better yet, even before they break. I just replaced mine since I was already removing the panels to upgrade my speakers, and sure enough, three of the plastic pieces were cracked, and another one disintegrated in my hand when I was inspecting it.

You can get small led fluorescent tubes that use 12v-30v. I replaced the ballast in an antique desk lamp with a 12v wall bug from my box of power supplies and the LED tube works great.

can you give the pump part number from amazon?..tried to find it but they all said they didnt fit my 2007 f150 4.6..btw i gave my vehicle description

I own a 2005 .. How to know which wire(s) are correct? Mine looks different up front.

What’s the part number? Or what’s it’s called ? Can’t find it in the description

For anyone considering new wipers... You can install 22" beam-style wipers on both sides of a 2004-2008, 2009-2014, 2015-2020, 2021-2024 F150. They work perfectly and sit much lower than conventional blades. Full length contact to glass as well.

Y didn't I watch this video first? It 'twas the Y for my 2004 FX4. After I ordered a pump for $8... Weird because the driver's side was working for a bit then they both petered out a dribble. BTW a carefully placed stainless screw will hold the 2 covers together (just under the hood lip).

You need a special led bulb to bypass the ballast? I bought some Harbor Freight replacement bulbs to bypass the ballast

I have a couple of 8’ flourescent fixtures. How do you convert them to LED?

Thank you for making this video; the owners manual doesn't mention any of this, unless it's in another language. So, we followed your video and WOILA we finally cleaned our dryer today, found lots of lint, dust, treasure coins, etc. THANK YOU!

Am I missing something? You've gone directly from connecting just your 2 pair red/blue to power on? Without connecting the black/white/ground?

Gggghggghgggghggggg

You did an excellent presentation on the Berkey. I certainly understand your frustrations. I have the Royal Berkey, and the water tastes great. I perform a monthly cleaning to keep it maintained with a new scotch brite sponge and Dawn disinfectant dish soap. I have had a couple of issues along the way with spigot leaking, but always managed to get it up and running. It can be temperamental if not tightened just so, so I tend to baby the unit. Just hang in there with it, keep your unit clean, filters primed, and do a red dye test occasionally. Thank you for such an honest review ..

Thank you

Thank you for the info. I was about to order a Berkey system, but thanks to you I'll try another system!

Thanks for the video

The problem from ordering on amazon is that there are many knock-offs of this filter.

Awesome video! It took me more than 20 minutes, but I didn't run into any trouble. These are way better than buying new ballasts.

Thank you. I didn't know how to get it out until I watched your video.

What did you do with the yellow wires???

My issue is the calcium deposits. After soaking in vinegar for 24 hours I can get the tool in those notches but it’s like the aerator is welded in place to the faucet due to the calcium. Trying WD40 next to hopefully help break it loose. I just cannot unscrew the aerator.

can you do this with all LED bulbs or do you need to have specific "no ballast" bulbs? I have t8s in now and one of the ballasts is bad.

Four years have passed and I hope the gate is still held up by those flimsy hinges.

one small note, when building a cross beam, always make sure that it is supported on the upper and lower boards, because the video shows that the gate you made has a diagonal beam supported on the lower one, and a side beam (away from the hinges), so that at the end of the gate there is a place (play) near the beam itself where the gate can fall gently (even a few cm gently for each m of the gate's length). Overall nice job!

Halogen?

Excellent tutorial!

Not any topper lock

Headlights...not highlights

I just had it done and it works thank you for the video!

Could I get the part numbers from Amazon to order what I need. Both rear doors on my 2004 ford f150 won't open Tks. Randy Roberson

Oh okay do the same thing we couldn't see with that one? Got it

Can't see wth u doing thanks tho

Thank you

Anyone know how to turn on the cargo lights in a 2005 F150? Bulbs are new, brake light works.

You are a good man...we need more men like you to fix our beautiful country and help young men, and ANY man help his spouse , children, and grow the love between us!😊

Where can I get a new unloader valve for this washer?

Great idea!

Im throughly liking your jam!. And your funny - you would think Jeep would have gotten something right after all their years of quality - but sold to the. Lowest bidder as always -but super classy and well done! Thanks for your commentary and an issue that should never be.

OMG IT WORKED!!!!! I can't believe it! thank you so so much! If you can make a video on how to upgrade a macbook pro 2015 to the latest or somewhat latest IOS, that would be great! I can't have any Google Meets due to the system not allowing me to upgrade my IOS! Thank you :)

how is it holding up so far?

Thanks this was very helpful. Replaced cable, cost £6 from Amazon.

if you had to do this "hot" and unable to turn off the lights.. would you first untwist the white then black or black then white and when re-twistting working last to begining.

I’m 5 years late but that “daddy I caught a frog” as a young and new father that made me smile was having a rough day but that really made my day

Dont remove the yellow wire guys. I tried this whole process and it literally blew the tombstone and the bulb, then i had to rewire that whole yellow line back in. & thats a very hard thing to do when you snip them at the base. Plus i had to buy new bulbs and tombstones, so Instead Hook both red & both blue wires to the black/hot line & then hook both the yellow wires to your white/neutral line. Trust me, it works. i had to learn the hard way. Whats crazy is i had to work on the same exact panel shown in the video so i was confused on why it didnt work. I mean his way obviously worked for him but it didnt work for me. It almost burnt the house down lol but just because it didnt work for me doesn't mean it won't work for you so if it doesn't work for you, try it my way the next time. One of the two ways will work for you guys

Wow very. Good job did it ✌🏻

so i put mine back together. is it still supposed to have a lot of resistance on the plunger? i see some videos of different style unloader valves that they compress with their thumb but even after cleaning mine(same style as yours) i can’t move it by hand. only in a vise.