Video

Putting this problem out there in case anyone can help. My icemaker will make a full bin of ice, but stops after a day or two. It always gets at least as far as a full bin. The bail arm comes back down as the ice is used. When I pull it out there are ice cubes about 60% of the way out of the crescent mold. I assume they have been that way for a day or two, so they are frozen to the ice mold and won't budge.. If I remove the entire unit and let it thaw, it will resume making ice once I put it back in and make at least a full bin again. I'm waiting on a multimeter to see if that will diagnose the problem.

This is exactly what I needed to fix my dish washer right down to the very part and problem. Thank you for saving me hundreds of dollars.

How do we clear these codes

Good video, thanks.

Garbage appliances!

Excellent job. Very understandable. Lol "it takes 2 to make a thing go right" 😅 I have my grandpa's multimeter and was trained as an electrician Apprentice, so i understand alot of your tutorial. Appliances are pretty interesting.

Excellent diagnostic video! I had an intermittent no glow igniter on a <1 year old Amana. All the components checked out ok. Thanks to this video, I was able to troubleshoot and determine the centrifugal switch was not working and found out that the connector was not completely locked in.

Thanks for posting

Confused" You say flame cuts off after a few seconds? Mine is 3:06, then shuts off? OR, you say it shuts off after about 30 mins, and it could be this or that? That's confusing, and I think you have the answer? Do you, as it could be Sensors, Sensors, OR Coils, BUT if coils, only after a few seconds - VERY confusing? Please explain. Thank you for your video!! joe R.

Thanks for video, started out fine, BUT got too fast and confusing after that? Thanks anyway??

Mine starts has the flame come on for a few seconds then shuts off with an error code of E01. It's a Bosch. I bench tested the flame sensor and it never opens. Could this be why or something else?

The Citizen Kane of electric range repair videos! Magnifique! Four Stars!

Gud am sir.can i have the prices of the ff: Stainwash ultra LHBI02 8.0KG Molex part #W1074665-0 MANUFACTURING DATE: 3-2-2018

Everything about this including the resistance measurements is so well done. Thank you for making this video.

I would have saved myself a lot of grief if I had watched this first. Best tip.... check burner function FIRST! Do this before tearing the dryer apart.

After doing some research on my own, it's called an EC-3 or EC-5 connector. Most notably used for Lipo battery harness. Which is it for this motor?

F30 and f71 are the codes I get, unsure of what to do lmao

Thanks

Thanks

Superb video. Clear and concise. Second time watching this. I have an old kenmore fridge and love it. A few months ago, the fridge was not cooling and had to throw away food. Ice was on the back wall. Watched several videos but that evening it was working again. Whew 😅 I am adamant about closing doors firmly and clean coils monthly. Yesterday it happened again. Had to throw away food. No ice buildup. Today, 24 hours later, it’s working fine again. All my ice packs are frozen. Could this be the defrost thermostat intermittently failing? Thanks for sharing your knowledge. Peace love and blessings 💫

Went to the website and searched "deconstructing the dryer" but "Not Found" came up. How do I see the video on taking the dryer panels off (particularly the front panel(s)?

I'm so scared to do these simple things lol I undid my connections junction power box thing from the dishwasher and discovered the wires melted into each other , I'ma cut them back and reuse the wires but may check to see if the other end of this is connect to a 3 switch and single socket junction box above the counter, any advice ?

Great video, thanks very much. The only thing I missed is how to test and replace the valve if the coils are not the problem

Many Thanks for this Video! Used the information to understand and repair my icemaker successfully! Instead of buying a $250-$300 replacement icemaker I got the control module off of Amazon for $30 in a day. Excellent Video!

Same dishwasher. Same noise. Took out the pump and disassembled as shown in the video. No blockage. No rubbing. Still Noise 😩Seems to be coming from inside the pump motor. Is it a bearing? Time for a replacement?

Thanks is a great word, But this vidio was much more helpful than expected. I'll be taking my wife out to eat.

Can a recalibration be performed on the model shown in this video?

My dryer burner comes on for like 30 seconds then goes off. Takes forever to dry its venting great but my lint trap isn’t getting any lint on it to clean off. Has me frazzled. The clothes are super stiff and wrinkly also

oh now i feel dumb . it keeps falling out

Hello, great video! I did a diagnostic and came up with a f72. Any suggestions on what to do next? It will not spin at this point

All good but the video didn't show how do you get to the parts? I cannot for the life of me take off the panel to get to the coil without breaking something.

Thanx for the info.. I'm about to eat all my food, unplug it, and thaw it out!!! Great excuse to throw a party with friends and pig out!!!!!! 🍤🍖🍗🥩🧀🌮🍕🍻🥂🍾🥃🍺🍹🍸🍷🧊

Excellent video!

My exact refrigerator…wish i personally knew where to start😩

Got mine doing the test. Do you know how long it's going to take?

mine has no jumper holes the the first ice maker you showed, how do I test it? No Jumper holes.

Should I be getting a reading from the ignitor on ohms? If I do does it mean it is weak and needs to be replaced? I have a Kenmore 400 series. Thanks and God bless!

Haier no frost double door model 618SS cooling issue 🥲🥲

OHHHH MY GOD AFTER 3 HOURS IT WOKRED. YOUR VIDEO WAS LEGIT. I FIXED IT ❤❤❤❤❤ THANK YOUUUU. YES IM SHOUTING OF HAPPINESS 🙌🏽🤣🤣

Good day, what might be the course of error in 4plate touch LG.

Wow. I felt kike i was in vocay school! 😂😂😂❤❤❤❤

My ice maker arm is stuck on open

Awesome video!!!😊

Excellent video. Thank you for presenting a very simple, clear, how-to on Whirlpool dryer repair. Great pace and illustrations and probably one of the best how-to videos I have seen. Thank you!

hanks for the video. Just curious...I have a samsung and the top of the coils keeps icing up with the bottom clean. I felt the heat from the defroster on so I know that works...would the bi-metal thermostat be causing the top to ice up? I can tell its affecting the cooling of the inside

L & M showed no resistance on my ice maker. Took the motor/gear assembly apart and spun the motor with voltmeter set to A/C voltage. The motor generated power so confirmed it was fine. After replacing the control board kit (emitter and receiver), the ice maker started working. It had the 2 flash failure on my Kenmore Coldspot.

Thanks so much for teaching us how to fix the washing machine.. got jamed.. but it's c8 now.. let's hope it works again. Thanks so much.

best appliance repair video I've ever seen. hands down. Thank you!

very helpful hope it will save me some money. thanks

I've been repairing my own appliances for a while now. This was a great video that gave me information that was useful. Thanks for sharing.