If you’re stuck in the loop and running it off only an ssd and the loop makes it so you CANT OPEN BIOS then remove your ssd and it will default to bios on startup and then change the boot order and if you dont know what to change then just reset to defaults in bios
Mine completely skips over activation, selection version of windows, etc. and goes directly to "Install Now". If I leave USB in, it loops back, but if I remove it, it takes me to the Cortana screen. No choice to not install it.
I forgot to mention when you are resetting the CMOS battery after taking it out you need to hold the power button for 1 minute to fully discharge the power.
Power down Unplug it Open the system unit Remove the CMOS CR-2032 chip Plug it in, start the machine, wait 10 seconds Power down, unplug it, reinstall the CMOS CR-2032 chip Plug it in again, power up Restart setup again... When your computer restarts pull out your flash drive so the computer is loading from the hard drive
I thought there is some problem with my usb drive i tried 3 different usb drives Then end up in this comment section remove usb drive wile its restarting and it worked 😊😊
I am so glad I found this. You have saved me from throwing this thing against the wall LOL SMH and Microsoft Tech Support has no clue. But the folks in these comments knew what to do. THANKS GUYS & GALS
But it says i cant install Windows because apparently there’s a corrupted file so I tried to restart my pc without the thumb drive and it says '' Windows failed to start.A recent Hardware or software change might be the cause'' and now I cant do anything exept the windows installation that I am stuck in a loop and I cant even install it because there’s an error code. Please help me.
I did pull out the usb when it asks for restart, but it just enters into uefi bios and no matter how many times i select the drive on which windows was installed, it just keeps entering into uefi bios please help
@@wrybit7179 hey! actually i did fix it, this video saved me: www.youtube.com/@JMKAHALSKILL although its in another language, there are subtitles, i followed it and it helped me, i couldnt recover my data and had to just format it all, but anyways now im replying to you from my laptop hehe... best of luck
The 100% working solution : The problem cause because your pc settings are on to boot from usb as a primary option. Please change boot sequence and make it to be boot from hard drive as the primary option not usb Go to your bios in the ' boot ' tab you can set primary boot to be from hard disk Then in bios go to ' Main ' tab and enable the boot option key ( f12 or something like that) Put your usb then restart the computer and click on f12 ( the key you enabled) and choose the boot to be from your usb then continue windows installation and its will be working 100%
hi, i am trying to freshly install windows 10 on my pc but when i try to boot it up with the bootavble hard drive, it shuts down, i tried removing other usb devices but it didnt work either, i also tried resetting the bios still nothing, please help me.
Guys for those who still get "Windows cannot find boot device" after removing the usb. Press F12 during restart screen to open boot options and select the drive you installed windows in. It happens because you have multiple disk drives and motherboard cannot pick a boot device because we selected the usb. You just need to press F12 during restart screen and choose your windows disk as boot option.
I'll second this as my issue. My BIOS has easy access priority options on main page, but it doesn't distinguish between my hard drives, it merely distinguishes between type of bootable hardware. So I had to go into advanced and make sure to update *which* drive to boot from. I didn't have to remove the USB btw.
REMOVE YOUR PENDRIVE RIGHT WHEN COMPUTER RESTART
If you’re stuck in the loop and running it off only an ssd and the loop makes it so you CANT OPEN BIOS then remove your ssd and it will default to bios on startup and then change the boot order and if you dont know what to change then just reset to defaults in bios
😅😅😅🎉🎉🎉
Mine completely skips over activation, selection version of windows, etc. and goes directly to "Install Now". If I leave USB in, it loops back, but if I remove it, it takes me to the Cortana screen. No choice to not install it.
I did remove my pendrive... Then worked... I need to setup the new windows then when I do restart I need to change the BIOS
im a donkey
Guyssss, it just workedddd, thats howw it should just remove the pendrive during the countdown thats ittt🔥🔥🔥🔥
The comment section help you not the video.
Holy f i just removed the usb thst i put yesterday and it worked. Stupid usb made that problem 😅
I cant even get it passed the second step it just keeps resetting back to the install now screen
this will work if win10 finished insalling.... but what if mid process.. 78 percent, and you are bought to the start install scree again
this comment section fixed my problem 👏👏👏
I forgot to mention when you are resetting the CMOS battery after taking it out you need to hold the power button for 1 minute to fully discharge the power.
Power down Unplug it Open the system unit Remove the CMOS CR-2032 chip Plug it in, start the machine, wait 10 seconds Power down, unplug it, reinstall the CMOS CR-2032 chip Plug it in again, power up Restart setup again... When your computer restarts pull out your flash drive so the computer is loading from the hard drive
I thought there is some problem with my usb drive i tried 3 different usb drives Then end up in this comment section remove usb drive wile its restarting and it worked 😊😊
Thanks a lot comment section 😊after 5 - 6 times it worked when I plugged out usb drive💯💯👍
Ty for the comments
worked just unplug usb as soon as its black screen and go in bios and change back order and it should work at least for me
Just click on repair then troubleshooting then shutdown option then unplug usb then power on and have fun😊
The fact that I've tried this and It didn't work is crazy
I am so glad I found this. You have saved me from throwing this thing against the wall LOL SMH and Microsoft Tech Support has no clue. But the folks in these comments knew what to do. THANKS GUYS & GALS
I removed usb when pc was about to restart for 1st time. And it worked. Thank God ❤
I have the exact same issue, tried everything in the comments. Only way I fixed it was getting a new ssd
Search convert mbr to gpt, after converting/fixing the partition then reinstall
czcams.com/video/QufEmp-UyTY/video.htmlsi=1TAmekACtQlJciei
Just remove the pen drive or cd while it starts resting. Comment Section was really helpful for me. Thanks everyone
FUCK THIS FUCKING CANCER
thank u
when pc is going to restart just remove the usb flash drive after when loading is complted , it worked for me very well
I love you, do you know if it’s important that I have 47 windows ten selections, it automatically went to the next page after
I fixed mine by going into the bios, storage boot mode=UEFi only, restarted and deleted all the partitions, and the install worked afterwards
But it says i cant install Windows because apparently there’s a corrupted file so I tried to restart my pc without the thumb drive and it says '' Windows failed to start.A recent Hardware or software change might be the cause'' and now I cant do anything exept the windows installation that I am stuck in a loop and I cant even install it because there’s an error code. Please help me.
I got the same problem pllzzzz tell me what to do 😭😭
Any solution
well i missed the part to remove the pen drive so do i retry downloading it?
Thanks you guys in the comment section and also to you man. It finally works ❤️
Thanks to the comment section. Seems like pull out game works here too 😂
Just remove the usb when it restarts and it works
I did pull out the usb when it asks for restart, but it just enters into uefi bios and no matter how many times i select the drive on which windows was installed, it just keeps entering into uefi bios please help
Have you fixed it yet
Let me know because Im having the same issue
@@wrybit7179 hey! actually i did fix it, this video saved me: www.youtube.com/@JMKAHALSKILL although its in another language, there are subtitles, i followed it and it helped me, i couldnt recover my data and had to just format it all, but anyways now im replying to you from my laptop hehe... best of luck
what do you do if you used a partition as a virtual usb to download windows 10 and are stuck in the loop
Just use a usb
I have the same monitor haha
Just remove the usb when it restarts
Thanks for the video big baller
thiss iss unbelivable it was a simplee trick and i wasted my 1 hour watching youtube videoss. worked for me thanks commentator 👍🏻
The 100% working solution : The problem cause because your pc settings are on to boot from usb as a primary option. Please change boot sequence and make it to be boot from hard drive as the primary option not usb Go to your bios in the ' boot ' tab you can set primary boot to be from hard disk Then in bios go to ' Main ' tab and enable the boot option key ( f12 or something like that) Put your usb then restart the computer and click on f12 ( the key you enabled) and choose the boot to be from your usb then continue windows installation and its will be working 100%
hi, i am trying to freshly install windows 10 on my pc but when i try to boot it up with the bootavble hard drive, it shuts down, i tried removing other usb devices but it didnt work either, i also tried resetting the bios still nothing, please help me.
Thanks bro❤
Guys for those who still get "Windows cannot find boot device" after removing the usb. Press F12 during restart screen to open boot options and select the drive you installed windows in. It happens because you have multiple disk drives and motherboard cannot pick a boot device because we selected the usb. You just need to press F12 during restart screen and choose your windows disk as boot option.
I'll second this as my issue. My BIOS has easy access priority options on main page, but it doesn't distinguish between my hard drives, it merely distinguishes between type of bootable hardware. So I had to go into advanced and make sure to update *which* drive to boot from. I didn't have to remove the USB btw.
really saved me!!!!!!!!!!!!!!!!11
Removing usb works but now it continuously showing "getting ready "
I still have the same problem... Can u help me if you solved it
w mans
Thanks a lot mannn❤️
What if you have pro z690-a ddr4. What mode should I go under there in boot mode?
OH MY GOD! This comment section helped me a lot! Thank you everyonee!!