Video

Whats the part number of your filter and the engine size,

I have a 2016 Sonata hybrid like this. Thankfully the newer ones have GDI/Port injection. Even using this spray, I have the BG service done every 12-18 months. I iave before/after BG photos that went from carbon covered to where i could see the piston head markings from the factory. 👍 172,000 miles so far, no issues. Even have the factory brake pads. ! The method I do this now is I installed an oil catch can years ago (as these people should) and I spray this or Seafoam in the hose going into the intake. I had mechanics tell me it worked better into the intake than the throttle body. 👍 It gets the back of the valves better-in theory.

wonder if you switched the tweets to opposite sides would that resolve your short wire issue.

Got any videos of how to install the amp to speakers?

Where can i find the dust covers at? The link you have is dead

looks like its still usable ..go another 5000 miles

I had no problem with a DS-18 don't know what you're talking about.

Nice filter

It’s nice to make the video but to someone who needs to see where the literal valve is, this video became pointless

i wonder if is a perfect fit for my tundra 2016

I thought you were supposed to drive it like a bat out if hell after the cleaning.

El amarillo es mejor...el k&n solo hace ruido...

Thanks for sharing! I've got this coming up on on our 2.4L Hyundai Santa Fe and we are about done with dealer service charges. So this is a great help! Take care!

They are great. I have them too

Did not lube the filter drain gasket. Filter housing gasket should be lubed prior to reinstalling to completely cover with oil. Did not replace the drain plug crush washer. Nice going, sparky.

Oil catch can may do wonders to prevent crank buildup and sludge for iac valves on some models.

I have one on mine too and it does catch some oil about 1 tbsp every oil change and its only got 18k on it. I work on toyotas and every 2gr intake i pull has oil all on the inside. Either way doesnt hurt to have it 🤷🏽‍♂️

Completely useless on an N/A engine unless your already having an excessive blow by issue

I haven't heard of excessive build up being an issue on Tacoma intakes. Probably a waste on money.

Unnecessary, why ruin a good truck😅😅😅

The Truth about catch cans: czcams.com/video/dBAqxSXFyb4/video.html

I have one .....i like it

Ds18 sounds better than kicker imo good purchase

Those reusable snake oil performance let dust debris through in dusty conditions. Car mechanics see problems caused by them all the time. If you hold them up to the light, you can actually see light through them.

How did you inspect the intake valves with the borescope, through the spark plug hole when a valve was open?

This stuff wotks well.

what bulbs do you have in the lights next to the headlights?

Yes it can slowly help remove carbon build up on intake valves. Good to do every 10,000 miles or so.

I had an issue with the clips

I just bought these right now..should I disconnect the battery before installing?

Hello nice ride, any update on the performance of this filter, is it worth it?

Off topic, but how did you cover up the license plate holes? Assuming you had some. Mine are just there and looking to over it up

If you haven't already, I would recommend a transmission spill and fill also. I would have done it at 30k miles, but at 60k it's definitely about time to keep the trans in good working order

You forgot to replace the new crush washer.

Thanks for the update and great video. How have they held up?

What brake cleaner are you using great video peaceful video to watch

“ euhm” 67x

Stupid. You need to Torque the oil filter to 18 ft lb the cap to 10 ft lb. Drain plug to 30 ft lb. 6.2 quarts.

FYI, the plastic oil filter housing is good quality and if not over torqued will last the life of your vehicle.

You’re supposed to rub oil on both O Rings when installing them

I think shorten the hose Lol it's long enough for the vehicle to be lifted but if you work off the ground shorten it. and i always put cardboard down as i always spill a drip or two !

Good video but audio little too low😊

Are gen 2.5 compatible with 3rd gen Tacoma aftermarket fog lights?

I have a TRD sports premium. I contacted the dealer and ask for compatibility of Toyota OEM aluminum filter Housing P/N: 15620-31060. He said no. I don't understand. My engine is a V6 3.5L. It is a question and not a comment. If any person can answer, it will help. Thank you.

you used a torque wrench to as a breaker bar! toss that in the garbage can.

I tried to do loosen up my filter housing but it is stuck on tight. I don't know if the dealer over tighten the housing.

Do these bulbs have a high and low function or did you lose that?

Dimelo bro

Hey man nice vid. New sub here. Hows the bulb upgrade so far?