- 41
- 14 790 386
Homemade Inventions
United States
Registrace 7. 03. 2021
Business contact - homemadeinventions500@gmail.com
On this channel you will see short videos presenting the construction of machines, devices and tools.
You can find more videos on our second Made in Poland channel
czcams.com/users/MadeinPolandChannel
On this channel you will see short videos presenting the construction of machines, devices and tools.
You can find more videos on our second Made in Poland channel
czcams.com/users/MadeinPolandChannel
Making Scissor Lift Table 18V
I needed mobile workbench at the workshop for a long time so I decided to make it using relatively simple materials and whatever was at hand. During work I resolved to use old and broken power tools to make the rising mechanism.
Tools we use:
czcams.com/video/bzTb_DBgxPE/video.html - Turning Lawn Mower to Belt Grinder - Plans
czcams.com/video/xrp_Y_-_mOg/video.html - Hydraulic Vise is a Game Changer (plans available)
czcams.com/video/RXbL2x4vnvM/video.html - Making mobile Plasma Cutting Track
Tools we use:
czcams.com/video/bzTb_DBgxPE/video.html - Turning Lawn Mower to Belt Grinder - Plans
czcams.com/video/xrp_Y_-_mOg/video.html - Hydraulic Vise is a Game Changer (plans available)
czcams.com/video/RXbL2x4vnvM/video.html - Making mobile Plasma Cutting Track
zhlédnutí: 48 335
Video
Making a Wooden Casing Weel to the Garden
zhlédnutí 1,8KPřed 14 dny
Plans available after becoming our patreon - www.patreon.com/madeinpolandd We used spruce and pine wood to build this project. All screws are galvanized to prevent corrosion, and the roof is covered with shingles. The whole thing was quite heavy, so we had to assemble it in parts at the well site. amzn.to/3Urh3fE - Evolution miter saw www.amazon.com/shop/madeinpoland - tools and materials we use.
Turning Chainsaw in to Earth Auger
zhlédnutí 162KPřed měsícem
Tools we use - www.amazon.com/shop/madeinpoland As you can see in the video, the equipment works really well. We drilled several dozen 20 cm/8" holes with it without any problems. I think larger diameter drills would not be a problem. Chainsaw used in the video is the EA4300F38C model (3hp) ps. Makita is not a sponsor of this video. Tools we use in this video: czcams.com/video/bzTb_DBgxPE/video...
Making Mobile Crane - Using Planetary Gearbox
zhlédnutí 110KPřed měsícem
Tools we use - www.amazon.com/shop/madeinpoland Making your own workshop crane may be pointless for many of you when you can go to Habrot Freigh and buy a new one for little money. However, I decided to do it myself for several reasons. I adjusted the dimensions to fit my small and low workshop. The wheels are small, so I can roll them under my tables, which gives me greater opportunity to prec...
Turning Lawn Mower to Belt Grinder - Plans
zhlédnutí 48KPřed 2 měsíci
s.vevor.com/bfQVAS - Ready set of wheels www.amazon.com/shop/madeinpoland - Equipment and tools we use :) BELT SANDER 2x48" I used: The electric mower motor 1,5 hp 2800 RPM 50 hz Pallet carts rollers 50x50 mm A lots of steel :D Plans available after becoming our patreon - www.patreon.com/madeinpolandd
Electric & Hydraulic Dump Truck
zhlédnutí 201KPřed 3 měsíci
www.amazon.com/shop/madeinpoland - some tools and equipment we use s.click.aliexpress.com/e/_DDeo3vL - Similar motor i used The drive is made of worm gear motors that come from an old broken wheelchair. The motors have 150 watts each and, thanks to the additional chain transmission, they have a lot of power. The reduction is quite large because the sprockets have 10 and 43 teeth. Most of the fr...
Hydraulic Vise is a Game Changer (plans available)
zhlédnutí 72KPřed 3 měsíci
THE PLANS are available for channel members. Click the blue "JOIN" button next to the SUBSCRIBE button or click this link: czcams.com/channels/vjxf2YG-OycXsC8kyqU-dQ.htmljoin or Patreon www.patreon.com/madeinpolandd After fulfillment of the payment, you get the access to the plans of this project as well as you get the access to all ours plans which we've done so far including the plans of the ...
Making mobile Plasma Cutting Track
zhlédnutí 11KPřed 3 měsíci
When making this device, you tried to use inexpensive parts and relatively simple tools. The whole thing is powered by an 18v battery and a motor with a gear from an old broken drill. The cutter used in the video has 45 amps. Theoretically, it can cut up to 10 mm (not qualitative). Using a tracker, I can qualitatively cut about 12 mm.
Making Wood Chopper & Branch Splitter
zhlédnutí 46KPřed 4 měsíci
Branch cutters are generally known, but unfortunately their prices are high. Using our tools, we decided to make it ourselves and save a lot of money. The machine has two cutting shafts, thanks to which the resistance is lower than in the case of one shaft and the branches can be thicker. Additionally, we made two plates that cut the branches in half, which will enable the grinding of much thic...
HomeMade Kinetic Log splitter (better than hydraulic?)
zhlédnutí 750KPřed 5 měsíci
amzn.to/49qpyNS - Makita Drill For many people, a kinetic splitter may be a better solution than a hydraulic splitter. The biggest advantage of such a splitter is its speed. The entire cycle takes less than a second, thanks to the energy accumulated in the very heavy flywheel. My splitter may be a bit too fast, but I had no way to choose other gears. You may also be interested in these videos: ...
3 Hp Electric Chainsaw Build
zhlédnutí 199KPřed 6 měsíci
A 2.2 kW / 3 HP motor is fine for such a machine. Even with high pressure on the chain it works without any problem. Thanks to the foldable structure, the whole thing is very maneuverable and does not take up to much space. In the next video we will show you how to make a kinetic splitter, which you can see during the tests.
HIT - Extremely Strong Log Splitter
zhlédnutí 563KPřed 7 měsíci
A wood splitter is a very helpful tool, especially if you have knotty wood. We used a lot of steel to build our splitter to make the whole thing very stable. The main frame is 2 steel C-sections 160 mm and a flat bar 200x12. The gear is driven by a 2.2 kW gear motor with an output speed of 20 revolutions per minute. The toothed rack is a 2 x M4 (40x40) module, unhardened, and the gears of the s...
"Homemade" Flail Mower for Compact Tractor
zhlédnutí 243KPřed 9 měsíci
The differential we used comes from the Mercedes W220 I did the locking of the differential wrong. Inside you need to weld the satellites, not block the joint flange as I showed in the video. I corrected it after recording the video and it works fine.
This Machine will Smash all the Grass & branches
zhlédnutí 370KPřed 9 měsíci
We are the creator of the @MadeinPolandChannel and this is our second channel ;) www.olightstore.com/s/NE0MHS - use code MIP to get 10% off all purchases. We used a lot of parts from a broken lawn tractor, e.g. Engine 14 hp hydrostatic gearbox Fuel tank The wheels are from a 125cc ATV The machine works really very well. It can cut grass more than 1 meter high, shred branches and tidy up a negle...
Car Tires + Suzuki Engine = Interesting Trike
zhlédnutí 8KPřed rokem
Making Racer Trike with Car Wheels @MadeinPolandChannel
Turning Chainsaw into a Big Angle Grinder
zhlédnutí 57KPřed 2 lety
Turning Chainsaw into a Big Angle Grinder
Small Size Crane for Truck - Full build video
zhlédnutí 482KPřed 2 lety
Small Size Crane for Truck - Full build video
Steel Cutter Machine - Super smooth cutting
zhlédnutí 583KPřed 2 lety
Steel Cutter Machine - Super smooth cutting
Inexpensive Heating - Rocket Stove BUILD
zhlédnutí 11KPřed 2 lety
Inexpensive Heating - Rocket Stove BUILD
How about a heavy duty turn table base, when in the vertical position, to make turning the big rounds easier?
Very good craftemanship, but your idea of homemade and my idea of homemade are way different. Lol
Love it. The only thing I would do is put locking wheels on it !! So your job doesn't drift away on you when you are pushing or pulling at a tough nut/screw etc... !!
Bonjour s'il vous plaît Quel est le diamètre du tube porte fleaux?? merci Super travail good job 👍
This was an awesome build. Well done.
Very impressive. I would build the horizontal shelves wider though.
you gave us a big shit there, too slow no torque, tymu will never be able to with heavy on the table, on the drums a nice stupid thing.... DIY is not your thing, and we never do soydure with a stupid magnet!!!! 😂😂😂😂
Nice build. I like the height and that it doesn't appear that the legs leave excessive overhang at the highest reaches.
I think you are a great fabricator great to see someone like doing it
How many tools weren't harmed while making this video?
Very nice work sir
Nice!
bravoo
Came out great, really enjoy your videos. 👍😎
You are always creative and your works are excellent
Awesome work, dude! Nicely done!!! 😃 Stay safe there with your family! 🖖😊
Jednoduché a skvělé. Taky mam v planu si něco takového vyrobit a tvé video mi bude inspirací 👍 Si borec 👍👍
joli travail....bravo
MM77 Approved 👍🏼👍🏼………………………………………………………………………….Good build. I still think you would be the coolest guy for a neighbor EVER! LOL
Great Job! It's nice to see the "old" shop again.
Good work looks great but I don’t think it will split anything more than what you demonstrated
Looks like a hybrid or a slower version of a kinetic splitter. I want one
Made in poland
Маньяк конкретный 😅
Witam. Imadło super. Jak dobrać się do planów?
Великолепно!
This thing is nice! I have a slow 11.5 second cycle splitter. I need one of these. You build them to sell?
Great video! Talk about over built! Lumber must be much cheaper in Poland than America. That beast would have cost around $1000 in the U.S. Cheers! Świetny film! Mów o przebudowanej! Drewno w Polsce musi być znacznie tańsze niż w Ameryce. Ta bestia kosztowałaby w USA około 1000 dolarów. Pozdrawiam!
Super😀
Thank you! Cheers!
Nicely done.
WELL, it's spelled well! a weel is wheel but you got it close, spell check would help. lots of lumber, going to cost an arm and a leg? great video
Beautiful work, dude! It looks amazing!!! 😃 Really well done! Stay safe there with your family! 🖖😊
The beers at the end cooling from the earth was a nice touch! Well done :)
Hello guys beautiful project beautifully done good job
MM77 Approved 👍🏼👍🏼
Bardzo udana konstrukcja i to bez hydrauliki. Wszystko mechaniczne i proste w obsłudze.
jeszcze ze dwa kanały załóż i dawaj te same filmy na wszystkich.
Taki mam zamiar ;)
I would have used a trailer jack instead of all that fab and carrying a bottle jack. I just picked up a weld on one. Has the round cylinder to Weld to whatever. Then a pull pin to attach or rotate. Has like 28" of travel with side crank handle and drop down leg with pin. $60 weld on and you're done. The pivot makes me jealous though. I picked up a used crane for $150. Cylinder leaks a little, the pivot just a pipe inside another pipe base with gussets. Has a nylon washer between the 2. Cleaning and greasing no has it better but...poor design
Each one gave you. Haug
Who has all that metalworking equipment to begin with? And who has perfect rounds like that? Using this splitter has safety issues. Note how close the operator lets his hands get at times.
Трата времени
You built it very nicely! I would like to make one comment: you have fixed one of the outputs of the differential. With this, you have reduced the ratio by half. It does not cut perfectly because the speed of the cutting roller is low. And the solution is right there in your hands: free the fixed output and simply weld the planetary gears of the differential inside. It will cut beautifully! Very clever!
Hi!! Do you have the project?
Dude; did you streal this footage from Made in Poland, or did he let you use it? Dishonest!!!
Quiero 1 prcio
Great work and fabricator skills new sub
Hardly homemade!!!
.продажей не занимаеша
CESOIA 200 PAEE BATERIE
Cara parabéns pelo trabalho! Importante falar que nada seria possível sem a estrutura presente nessa oficina, e logicamente sem a experiência e talento para usá-la... I am from Brazil