Video

how come my fans don't light up when I'm connecting them to the motherboard argb header? do i need a separate fan and rgb hub?

I have this graphics card and my temp just goes up to 88 C i dont understand

THANK YOU OMGGGG NO OTHER VIDEO HAS ACTUALLY SHOWN ME HOW TO DO IT I LOVE YOU SUBSCRIBED

I used 32gigs of ram, Microsoft flight simulator takes every bit

Is this cooler good for a 5800x3d (will the temps will be same as the 5900x ?)

Thanks! The XMP/PBO was the settings I was missing. I spent a couple hours trying to figure that out.

if they are about the same, i wonder why the company make 2 different models ????

Why not use metric for size? Gpu is metric same with fans

Can I switch out the fans for lian li ones ?

ty very much

Just wanted to say thanks for the video, installed this with a 7800X3D! My first amd system ever built. The included arctic instructions are just bad imo. Couple of annoying things I had while installing: the cords don’t tuck underneath that clip/sheath very easily(what do you call it? A clip? Idk) so I was worried I’d damage those lil cords when snapping the magnetic plate on. They could use just a few mm more clearance for that sheath for the cords Screwing in the pump part to the motherboard plates u put in, it is not easy. Took like 3 mins to get it just right to where it would accept and screw into the board brackets. I could see why this has broken some lesser amd boards (allegedly) Don’t know why they changed this compared to the freezer II (reportedly it does not have this issue?) though, this is still 1000x easier than old fans that use back plates behind the motherboard for support. One more thing! I wish they emphasized more what side the L and R bracket goes on your motherboard. You cannot see the install (which one is R? lol) on their videoz Here it’s still kind of blurry but better Also I didn’t find any issue with him talking, don’t know what the other guys problem is. lol

My Arctic liquid III 360 tubes touch/rest on the GPU backplate. Is it ok? will it cause melting or other damage?

What are like the Top/ new games . .where you find a list?

I have an AM4 CPU the Ryzen 7 5800X3D and bought the new Arctic Liquid Freezer III 280 Black does the new AM4 offset brackets come with it and inside the box and doesn’t touch my m.2 nvme like the old revisions except rev 4 on ALF II which showed a half an inch of the IHS to cover the hot CCD or CCD’s or do I have to order one through there website?

I have an AM4 CPU the Ryzen 7 5800X3D and bought the new Arctic Liquid Freezer III 280 Black does the new AM4 offset brackets come with it and inside the box and doesn’t touch my m.2 nvme like the old revisions except rev 4 on ALF II which showed a half an inch of the IHS to cover the hot CCD or CCD’s or do I have to order one through there website?

Is that a corsair 4000x or 4000D case?

Hope I can make this work with a Lancool 216 case. I know it’s going to be tight and this is my first build so I’m a little nervous.

Its innertwined, not innerwhined 🤦‍♂️.

Thanks For The Video . I thought I Should Upgrade My CPU but no :D

Hi, how is installation, do I have to remove mb before bracket installation? I would like to replace my fractal aio with this one.

You sir are a rocket surgeon!! Just followed your step by step to install an Arctic Freezer III 360 in my son’s IBuyPower PC and it was a snap…..and I know jack about PC’s….thanks and keep up the awesome work!

How long does it take for the paste to dry?? Have a fear that by the time i spatulate the whole thing, it will be dry as dessert

THANKYOU SO MUCH!!! 😭😭 I got the z flip 6 solely because of the fact that you can access apps on the cover screen and I was struggling so hard to figure out how to add the apps. Every video I watched did not show me the exact steps. I'm soooo glad you showed how you have to add the multistar widget first!! THANK YOU

Are these fans set as intake or exhaust

How do you connect the wires to the pump it wasn’t in screen shot ?

Take care guys, 13:30 he has started recording a horror, not a tutorial. This completely discredited you to me. Not to mention you didn't even clean up the paste once you mess up and had to redo the join.

What cabinet are you placing that 420 mm in? And very nice vid bro, congrats!

Would it pair good with a 6600

Not a bad card! It's amazing how I can instantly tell that you're a fellow Canadian by how you say out and about lol. Rock on, buddy!

I still use the 980m 8gb versions in SLI with i7 4930MX in an Alienware 18. It runs everything great.

Im thinking of returning my gpu the 7900xt because of the bottleneck from the 5900x what gpu would you recommend for just 1080p

Battery is a bit smaller, but compared to the exynos 24+ it still has better battery life

Man… every body that did a installation with this cool skipped or didn’t show the import parts of wiring.. so annoying

Terrible audio . Possibly becos of wireless Some crucial words are hidden missing eaten up alive.

I have a i7-8700 (non-K) with 16GB and a Rx 470 4Gb, would I see at least any increase by getting 32Gb of ram or should I invest the extra money in a better gpu?

I have a Xeon build as my backup pc. Gigabyte ga-x99-ud4p mobo E5-2680 v4 Xeon cpu 16gb ddr4 @3200 MHz g.skill aegis ram Rtx 2070 super She runs well but I am undoubtably getting some bottleneck but it’s an old gpu so idc. People sleep on the xeons! Can my cpu was 20$ for 14 cores like that’s insane.

Complains it doesn’t event come with a cover for PCIe, then goes on thumping the card on the PCIe 😂 I’m glad it didn’t damage your card.

was just looking this information up, thanks for the video!

I keep getting a "Bios ID check error" :/ And I know I am using the right revision 1.2

Useless unboxing. The whole point is we see how everything is packed and put inside the box and the whole part of opening and taking the inside carton out is edited out in 0:55... Then the second most usefull part of opening the inside carton and show us how the tubes and pump are packed inside gets edited out again in 1:02... How can someone screw something so easy as an unboxing video i always wondered. Now i know, just cut whole sections out lol. Might as well post some pics and call it a day at this point.

Just got 2 from Ali express for $132 USD each

Thanks for this, really appreciate it. My 5900x crapped out and I was looking for a spare until the 9xxx series releases. The 5600 seems like a decent replacement for only $90. I mostly use gpu rendering anyways.

where do you put the water?

New to PC building so this might be a dumb question 😭 but would this be good for a Ryzen 7 7700x? Or should I go with thermalright’s Phantom Spirit?

Thank you, nice review.

how do you have the rgb on the side? are you using exhaust on the side?

Hello! I had a quick question on how to install water of the cooler. Like where do I put the water since it’s a water cooler?

seriously interested in getting this AIO to replace my h170i I am sooooo sick of ICUE that I am getting rid of everything I own related to them....How is the performance of this AIO if anyone knows in comparison to the h170i in push/pull that would be awesome. OR if anyone could suggest a better 420mm AIO I would be forever greatful....cooling an undervolted and tuned i9 14900KS

im not sure why my "Magnetic Processor cooler fan" does not spin or light up, do i miss something? cpu cooler is connected and temperature is pretty low, everything works well just the processor fan is dead

I accidentally bought Phantom Assassin because of the confusing variety of Thermalright Products, I don't know if it's better than Peerless Assassin or not.