Video

The OEM blades are waaaaay better. Worth the extra money. Not so for other OEM parts but WWB, yes

Seems to have worked. I did have to start the vehicle first to move the shift knob into reverse. Turned the vehicle off for 5 minutes, and it worked!

I'd have it all done with a brush, by the time it takes to keep dipping

🤔😳😂 Thank you! Not all heroes wear capes. 🤓🥸😎

2020 Highlander Hybrid. Screen was going on and off.. I saw this video, did the thing, restarted the car and it was fixed!!! 😊 Than you , it worked !!!

I can paint like a pro ,then I hide my edger ,they think i did that with a brush 😂

Thank you very much. I was travelling for 5 weeks and car was not driven. Ran into same problem. This video helped me to fix it.

I do something similar by using a handheld vacuum pump. We just tried this on my son's Mazda CX5. The only drawback was that the tubing was too large to fit snugly on the bleeder screw so had to resort back to the foot pumping method.

It just worked for our 2021 Highlander! Thanks so much!

This works! 2020 Highlander. You rock! Not sure how the heck you found this. Been irritated by this on and off since we first got the vehicle (new). Toyota Service was no help. just bumped into again after having to replace the battery. All good!

Thanks, you have saved my $200. It worked for toyota Highlander 2020.

It worked for me I have a 2020 Toyota Highlander but I had to start it first cuz she was screaming noises so then I put it in reverse then click the p button to park hold it then turned car off for 5 mins . Came back after 5 mins then put it in p then press the push start button without hitting brake , once to power off then restarted it and it’s back thank you so much it helped me a lot 🙏❤️

The shaking is a known issue with the 2015 honda CR-V. There is a service bulletin out about it. I bought mine and felt like my teeth were going to shatter when idle with AC on. Took it in and they installed rear dampeners, new engine mounts and adjusted the engine idle through the ECU. it barely helped but it did help. As to what others are saying about the longevity of these iridium plugs, I have 218,000 miles on my car and have yet to replace my plugs. I replace my full synthetic oil every 10k miles. My fuel efficiency is the same as the day I purchased. I recently had a slow start so I am replacing the plugs this weekend but definitely do not replace these every 30k.

I just bought this paint edging tool to paint my bathroom ceiling with Kilz. This video was exactly what I needed to boost my confidence to actually get it done! Thanks so much.

Had car repaired and radio stopped working. They told us we need an update and only the dealer can do this. Tried this out and it worked!! 2021 Highlander. Thanks!

❤

You could’ve supplied an entire village with the amount of anti seize on those threads 🤯

Do you know the trick to reset this for a 2015 Toyota Highlander that doesn’t have the push start button and just a traditional key?

better results if you take a bit oF time

It’s helped me and fix this problem. Thanks for your informative video

❤️🔥❤️🔥❤️🔥❤️🔥❤️🔥❤️🔥❤️🔥❤️

2020 Highlander notes. Cannot move the shifter if truck is not started, so I started it, move shift to reverse, set the brake and turn it off for 5+ minutes, IT WORKED!!!

It worked thank you!!

Dude. Did you see all that debris in the bottom of the tank?!? You’re asking for trouble later.

Thanks bro, gives me another alternative to check while checking the throttle body for cleaning👌❤️

Spark plugs don’t need replacing every 30,000 miles. The only people that say that are people who work at a dealership because it gets people to spend unnecessary money. Spark plugs nowadays are made to last 100,000+ miles. Old cars used to have spark plugs that had to be replaced that often, but now they’re made differently, so they last a lot longer.

Hah! I watched the intro and you popping out the arm pad. It was all cake from there. Didn't even finish the video, thanks for your contribution. Everything works just the way it's supposed to.

awesome 👌🏾

Qherw these good 3 years later

I'm a new subscriber and just wanted to say your video made my job easier.

Hey man I have a question what size did you use for the part number 7 the holds the air intake it’s call M6 male/ female isolation mount ECU bracket

Driver side is 26in right? Passenger 16in?

What trim is this? Touring?

Good job

Its called a "Corona Stain". czcams.com/video/OvL7oisPn8Q/video.html

I have a 2009 CRV. Iridium plugs last 100K miles and they can go even longer. The plug you took out looked perfectly normal and was not "burned up". Secondly, you should have gone with OEM Denso or NGK plugs for this car. Those are the only plugs Honda uses. Period.

Helpful, thanks

Thank you for making this video! I’m doing spark plugs this weekend

I recommend everyone checking there local Nissan dealer just picked up 2 for 10$ and didn’t have to wait for shipping Part number 11823-JA00A

Anyone have the part number for the hose ?

Easier with a brush for cutting in, just water down your paint so there’s no smudging, works a treat and you get a perfect line

I have the same problem with condensation in my headlamp. Did you disconnect the battery before removing the bumper? Thanks

They do make punch free or no drill options.

Thank you so much. Very helpful

Thanks for the demonstration. I just bought one of these and I had no idea how to use it. I agree with you the paint edger puts more paint on the wall and there for taking less time to do the corners and cutting in the ceiling. I also agree with the one person who commented. Thanks for no background music. that makes it easier to hear you and you know your audience is hearing what you are saying. Good luck with this channel and I will tune n from time to time.

Где можно купить ?

Terrible video. You just glossed over the details.

Do I need to buy high and low

Thank you

I love how he completely slipped over putting the serpentine belt on. It's a lot harder to get to the tensioner than just "put the serpentine belt on".