Video

Battery amps x battery volts = kilowatts

I'm not 100% sure, but the EXT fit the standard surron the you shouldn't have a problem with the EBMX swingarm as I still use the stock rear shock in there

Yeah I agree, offroad is heaps better. I have the 19/17 set up now for offroad and reckon these 14s are the perfect size on road

no 😂

These bikes top out at around 45, with a few aftermarket mods, no problem

If you come from a gas bike this is nothing, but yes, it is slightly louder than a Talaria or I could have kept the belt on, but I don't mind the noise

No, the lbs has a small motor. Only good for about 7kw max with a bac4000

Surron LBX

You will need a lbx controller to use the 60v battery, your lbs controller is only good for 48v

@@danburgez Thanks for clearing that up.

😆

I just offest the wheel and trimmed 3mm off the knobs on the chain side

You could also use a jackshaft spacer to move the chain away. I just didn't want my chain any closer to the swing arm

You can just install it, no programming required

and did you upgrade the power?

In stock form it was registered as a motorcycle, which means I can ride at an unrestricted speed with a motorcycle licence. It is heavily modified now tho. I've had no trouble from the police

That's impressive, nice and wide. Cheers mate

What do you mean silky? I am running a 219 primary chain as well

@@danburgez I mean, your motor seems quieter than most. It doesn't have the usual Ultra Bee motor whine.

@@danburgez disregard. you are riding the light bee which i also have. That's the difference. My light bee motor sounds a lot quieter than my Ultra Bee's motor. Anyway, nice bike man.

@y2k1307 haha no worries man, cheers 🤙

The swing arm makes a massive difference

Yeah all just plugs in, controller swap is easy. Lower tooth sprocket will give you a better top speed 48T but you'll lose a bit off the bottom end. Should be the same as a stock LBX 70kph

It should be the same

Thank you 🤙

So good in the mud 😆

It should be the same

Pro-pleat cover, local from Perth

Not enough in stock form 😆 lots of variables, weight, riding style, riding speed, gearing.

Thank you, it's a PW80 fender from Aliexpress. It works great I just wish it had a little more point to it 🤙

Thanks man👍🏻 Have you tested the top speed on the surron yet? (With max kilowatts)

@@TheRealMime-_- The belt drive systems sound like washing machines. Next year, I hope they give those without it a Gear Box.

You can use your kickstand sensor

@@danburgezthanks

Nah we dont have any 16s in Aus, I would have to import a set and it cost heaps to get them from the US

I don't think it will work, as the lbx controller is 60v and the lbs is 48v. You could just buy a lbx battery at the same time and you'll have a 6kw bike

You can buy a bac4000 it works with the lbs

I haven't tested distance yet on road, but settings and sprocket size will a part in how far you can go.

Yeah sick, get the L1e and you'll never have to worry about the cops taking it 🤙

@@danburgez im going to buy second hand segway x260 for 3500, its a good deal. and it only has 1000km

@The_Real_Fearless yeah that's not bad, you just can't legally ride on the ride

@@danburgez yeah I know I’ll just ride off or go short cuts and stuff. I live where cane fields are

But will mostly ride offroad

Yeah mate

I really need to know 1 as well

Sorry, I haven't played on the new version yet

@@lucagonzalez1755 I contacted the distributor and they mentioned this feature is no longer available on the 2024 Surron. Apparently it has regen but completely controlled by the controller

@@Alex-oy6wbi can do this with my 2024 lbx 40v 60ah

@@Knut6969 do you have the single connector to the battery or the dual connector?

Thank you mate, yeah its just not quit right. I have put the stock L1e headlight back on for now

Nah mate, I just made it all up as I went

I just plugged that switch in, and it worked. You might have to swap a couple of wires around tho

@@danburgez Thanks for the reply, I have a different switch, but it only turns it on or off, the upper LED I could not figure out how to turn it on.. I'll look into the wires, thnx dude

Sorry mate, I couldn't tell you. Not lucky enough to ride one yet

Hey mate, I got these mirrors from Aliexpress. My bars are the moto style that are thicker bar ends, so I can't put the mirrors in the end, but no problem clamping to them

@@danburgez cheers man, I'll order another set and see how I go. I'm going to order some riser bars soon, but still 7/8"

Yeah its a sick spot. Has been built for a few years now, I didn't build it just do a bit of maintenance after riding there.

No, you would need to upgrade the harness for lights

Are you in Australia? You can't ride on side walks here and mine is registered as a motorcycle so I'm not restricted to speed

Gearing doesn't really matter offroad it's only to "try" to have a more accurate speedo on road

You can't, no on/off or high beam. You can buy a switch from Aliexpress which is plug and play then you can turn them on and off

Nah no other display, once you upgrade to an aftermarket controller the display is almost useless anyway. I have just removed mine see how it goes

I fabricated the tidy tail, but it didn't end up work as it still would hit the rear wheel. I just posted a short where you can see the tail light set up now

Sorry mate I didn't do a range test

🤣🤣

I got this L1e from FB Marketplace

The X9000 V2 controller is definitely the one to go with, and Torp is a good second choice. Best to get a battery at the same time tho as there is only so much you can pull from the stock batteries unless you bypass them. The tidy tail didn't end up working, I now have my plate mounted under the seat similar to the LBX surron plate running an Aliexpress tail light and indicators all in one. I just take the plate off when I go offroad

@@danburgez that sounds like what I need to do, any chance you can throw a quick vid up showing it?

Yeah mate I'll do a video this week

@@danburgez cheers legend. Before I got the Ron I was looking for some Aussie content, you've pretty much done everything I need to do, wished I found your channel sooner. The algorithm is junk.

Hey mate, I posted a short where you can see what tail light im running. My number plate just bolts to that, I've made it so I can remove it quickly offroad

It was loud AF, found the problem, bent jackshaft which prob damaged the bearings and primary chain was dry and way too tight. All sorted now tho and sounding a lot better 🤙

​@@danburgezOne thing I hate about my Surron is that jackshaft.. I have 3 but went through 2 of them. I've upgraded the bearing in shaft and swing arm.. Might try the roller bearings here soon..Grrr.. My 3rd one is from(( technicq-emx )) I haven't installed that one yet.. but its a 3 pc CNC jackshaft with a grease nipple installed on it.. Was viewing your bike cause I'm in the market on buying a supermoto set.. just not keen on spending 1k for a set just yet.. Luna has a 16 moto set for $550.. or a 17 for like $440.. I haven't rode mine in like 10 months 😢. Some idiot decided to hit my a$$ last yr.. busted my left shoulder up pretty good.. I prolly won't be able to lift my arm up to hold the handle bars till next year.. Its all good tho.. I'll just buy parts until then 😉. Nice bike tho😀