Video

I’m thinking about buying one of these. I found one used and has 30k miles. Does it cost a lot to fix? The guy said all I have to do is get a new battery and maybe a carb clean. It has been sitting for over 2 years

They actually made a tour pac for the back seat but finding one is rare

Love what you done with your sr250! I used bars off of a buell cyclone. Thank goodness my tank is still good but if it ever gets bad you gave me direction. Still cruising mine around south eastern Ohio

While I own a few motorcycles in my 59 years on this planet, my 73' DT250 is definitely one of my favorites of all time. People are always asking " what year is that" or saying "my buddy had one back in the day." I took it out for a spin about 4 hours ago and I'm still smiling. Awesome little machine that was way ahead of its time.

Sounds like the 244 would be great on the kawasaki versys 300

Thanks for sharing this video 👍🎯

I want one

Not sure if you'll still make more videos but please do

Does the dr350se have fully adjustable suspension?

The wobble is real. Kenda K270s front rear that's what I have. Happens at higher speeds around 40 to 80 mph but it happens when they're new.... I think. I've probably put down like a thousand or more miles on them at this point and I haven't felt it in a while. And I'm talking about just riding upright and not leaning into corners and I haven't actually felt the wobble whilst leaning into Corners maybe I haven't leaned in far enough but I feel like I'm leaning a lot like around 60 - 65° angle. I love how tall these tires are give me a solid half inch over competitors giving my ride height more ground clearance seems to perform well on Highway and on the dirt and don't lose traction as much as I thought I would. Answer that and I have a medium sized dirt bike trail bike kind of thing you know the XR250L 291 pounds wet leaning into corners I've gotten pretty comfortable doing it side knobs are pretty durable no chunking at all.

Jim .... I have a XR650L that was ridiculously high.... I lowered it 4" front and rear... here's how I did it...1) bought handle bar risers which raised the handle bars 1" but allowed me to get them out of the way for the forks to come up. 2) I added 1/2" of steel to an adjustable lowering link that was supposed to drop the bike 2" but that was not enough for me (30" inseam) so I added 1/2" of steel to the adjuster and lowered it to where I could flat foot the bike and locked it down..... touching the ground with just the balls of your feet is not low enough you need to go lower , Yes I am aware that they do not make a lowering kit that lowers any bike more than 2" so make your own plates add 1/2" to 3/4" and make your own or have the welding shop make them for you. take one off and take it to him and tell him to make you 2 that are 1/2" to 3/4" longer between the center of the bolt holes !!!!! it's that easy i noticed in your video that your handle bars do need raised so you have max control a set of handle bar risers would do you alot of good and allow the front to go down even more.... so the end results is a XR650L (stock seat height 37") lowered to aprox. 31" seat height uncompressed. I softened up the pre load as well and took a long knife to the foam on the seat..... and your right I need a seat concepts seat ! LOL an hours ride makes my butt hurt ! for 2 days !!! it's just too thin a seat ! the rear swing arm on my bike is just shy of horizontal on it it is horizontal and I have no handling problems at all with this setup. being short really sucks !!!

I’m with you !! I learned to ride with my first motorcycle. It was a 1971 CT Honda 70 in 1971 . I was 11 years old. Soon later I moved up to a Yamaha 1971 175 . In 1973 my father brought me A Honda XL 175 burnt orange or Halloween orange. I loved that bike . These days I ride a Road King .

Awesome video brothaman

I am using kenda 2.75 21 and 4.10 18 on my 200 CC dirt bike..it has over 130kg of weight..not a light dirtbike..after about 10k km on and off road.. the front still has more than 70% and about 50% on the back so the durability is there..the problem i have like u said the tired are to skinny..not only for the look but it also struggle in muddy terrain espesially the front cause it has closer block pattern and not enough contact surface..in the asphalt i have only 1 complain on heavy rain..but i usually stop when rain start to drop😂

God I miss my daddy too. I kept everything he ever gave me.

My bike! Same year/color. Ride it all the time. Also bought a brand new one in 72

What do you suggest if I have a hole in the tank? I think I left the vinegar in the tank too long and it appears to have eaten through part of the tank. Can it be welded? This might be above my pay grade.

I have a 1974 DT 100A with hole in the gas tank. I am embarrassed to say I may have caused it by leaving some vinegar in the tank too long. I was trying to get rust out. Can it be welded? Could i use a harbor freight welder to fix it?

Awesome

A rough ride. FWIW, I got fold-mirrors after a bad mud-hill fall on the xt225.

I've got an opportunity to buy an XT225 at a very reasonable price. Thanks for your input.

Great SI route, looks fun. Please share the route in SI you ride. Always looking for some new routes for a ride.

I had a 125 1974 Enduro Yamaha. Enjoy every moment

Strange 6th gear would do that…

I have a guy offering a 2003 xt225 with 6k miles on it for $2300? I also found a TT 200 for $2200 with 16k ok it. Thoughts on what bike you think might need better. For more street I would guess the XT? And I’m guessing the TT 200 is better off road?

So I found 2008 TW with 16k miles on it. Or a 2002 Xt with 3,262 miles both for $2200 I got them down. I live in a small city with a little off roading. Just not sure what bike would be best for me.

That was my 1st bike, I was 13.

Where did you get the jets etc? I have the same bike I'm restoring!

How do you feel comparing the XT and the DR-Z?

I have the exact bike. It’s the best

What kind of oil do you use in this bike? Modern automotive oil really doesn't have enough ZDDP anti-wear additivies for minimum wear of gear teeth, tappets, sprockets, chains, etc.

I was 15 years old when I bought my LT2. The bike is long gone but I still have the tool kit that came with it.

I'm willing to pay $300 per tire not to lose traction in mud, snow, rain. Not really into the brand name as much as keeping safe on the road.

I'm about to do this for my Honda Shadow. Same problem. I can't see the indicator light in the sunlight. I'm always forgetting to cancel the blinker. But, I am going to try it a little different way. I'm going to connect the buzzer to the indicator light directly.

I had no idea about this. I own 5 of this generation XT250s. Lucky me, all five of my bikes have the punch mark over the dash.

Great video and I'm sure it's going to help me out with my mods 👍 - just one observation regarding the kickstand. Would cutting and welding back not create a point of failure in the future? As in a point for it to break from? I often kickstart from standing on it so it time I think it might have some stress on it, potentially breaking it. While I still need to document myself on this, I'd say it wouldn't hurt asking around a question or two before modding the kickstand - feel free to share their opinion on this.

I like the way you talk about your dad in your video, it shows how much you respected, and appreciated him. My dad gave me a Honda xl 185 when I was 16, and I had to fix it to keep it, I eventually sold it to buy a dr500, because I needed a bike that could go on the highway to college - I miss those days.

❤️ God Bless All Much Love To All Be Blessed To All For Real ❤️

Kids nowadays can't even change a flat tire . Sad . I had a 72 YAMAHA DT 125 new as my first motorcycle . Good memories .

awesome review this helped a lot

I came here just to hear the sound of the bike. My family rode Yamaha Enduros in the 70's, when I was a really little kid. What a beautiful looking bike, and I'd probably kill myself, but I'd love to have one of the old beasts. My son accuses me of having a well developed nostalgia bias. He's probably right.

Just what I needed. I have a 72 175. Hasn’t run in years. It ran ok last time in 2003 but would just stop once I got around the block. May have to try it again, was a fun bike.

Great idea 👍

Hard to think of a better bike to teach a beginning rider on.

you good bro? I stumbled upon your vid and liked them. decided to check on your instagram, but can't seem to find your account or your website, and you haven't posted in a while. I hope you're doing well.

I got a bike just like that but red in color. It doesn’t run but it good condition. I was just looking to see what these are worth.

my dad sold mine in the late 70. exact same. who knows this could be mine or one of the other videos i found. they might be on it. or it might be in a junk yard. who knows. but i had the same bike. same color. dad sold it in the late 70s or early 80s. who know if the person sold it and another sold it or how many people have owned it by now

these are great bikes, i had a '71. a couple things to make it better. a 350 knobby and a good expansion chamber!

I had this exact bike as a kid

Does anyone know if this will work OK on motorcycles with LED turn lights?