- 25
- 55 308
Zac Crymes
Registrace 13. 12. 2015
What’s Happening Beneath the Surface?
It’s in our human nature to “judge” something based almost entirely on our perception of it’s reality. Often times, we fail to see the value of it’s entirety because we won’t look past the surface.
My question to you is, despite what things may look like... are you on the verge of breakthrough!?
My question to you is, despite what things may look like... are you on the verge of breakthrough!?
zhlédnutí: 58
Video
The Cost of Following Christ (Let the dead bury the dead)
zhlédnutí 78Před 3 lety
The Cost of Following Christ (Let the dead bury the dead)
Factory 47 (2020 Road Glide) install
zhlédnutí 36KPřed 3 lety
Just a quick install video of the 14” Factory 47 bars on a 2020 Road Glide Special. Aside from two wire extensions, you will use all of your stock hardware such as brake lines and clutch cable. With a little patience, this is a rather easy install that could save you $$$$ in labor! (Note* - at the end of the video I mention freeing up the brake line and throttle cable. That should have been the...
Pruning in the lives of God’s children
zhlédnutí 69Před 3 lety
God always has His hands over His children. Even death cannot stop the beauty of His plans in each of our lives! There’s no doubt loss is painful, but in that loss we have to remember that pruning brings forth increase. As adults, we know loss isn’t always the result of wrong doing. Death is a process of life. As a child of God, you can be assured that everything will work together for your goo...
2020 Lowrider S rear crash bar/pegs
zhlédnutí 1,6KPřed 3 lety
Instagram: zacwentrogue •5/16” Allen wrench •Loctite •Rattle can paint •Monster zero of your choice
2020 Lowrider S Bung King crash bar
zhlédnutí 2,5KPřed 3 lety
Instagram: zacwentrogue Items needed for install of the Bung King crash bar on the 2020 Lowrider S: •5/16 Allen bit •t45 Torx bit •Ratchet •Loctite •Breakover bar/bologna sandwich •Monster zero of your choice
Faith to stay “IN” the boat!
zhlédnutí 74Před 4 lety
We all know the story of Peter and the faith it took to get out of the boat, but how many of us have the faith to stay in the boat when it looks like there’s imminent destruction!? The face to stand firm and to trust in God when everything is falling to pieces around us is the type of faith we all need in moments like these! Acts 27 (Link to Steven’s sermon “Staying Power”) czcams.com/video/FE4...
Kid’s Cooking Competition (Kyndhl’s episode)
zhlédnutí 144Před 4 lety
Kid’s Cooking Competition (Kyndhl’s episode)
Kid’s Cooking Competition (Cash’s episode)
zhlédnutí 188Před 4 lety
Kid’s Cooking Competition (Cash’s episode)
"Walking as men of God”
zhlédnutí 109Před 4 lety
This is a man’s perspective of his calling and what is expected of him as he steps into that role as a man of God (as referenced by Jeremiah 1:4-10 and 1 Kings 13).
Kid’s Cooking Competition (Diezel’s Episode)
zhlédnutí 272Před 4 lety
Kid’s Cooking Competition (Diezel’s Episode)
1 Kings 13
zhlédnutí 78Před 4 lety
We all know of the inherent dangers of defying God, but how serious do we take our obligation to letting God’s Word lead us?
The Great Provider
zhlédnutí 66Před 4 lety
The wilderness can be a time of hardship, but it can also be a time to grow in the Lord! Just as God provided for His people in Exodus Chapter 16, we can rest assured that He will do the same for us!
“Where are you God!?”
zhlédnutí 90Před 4 lety
Have you ever felt abandoned by God in the midst of an attack? Does He go back on His word!? Most all of us have felt like God has abandoned us or “betrayed” us at some point in our lives. Join me as we take a quick glance at a family of felt like Jesus had abandoned them right when they needed Him most.
Bigfoot calling tutorial for advanced squatchers
zhlédnutí 176Před 5 lety
Bigfoot calling tutorial for advanced squatchers
New Mexico Bear bow hunt HD (Self Filmed)
zhlédnutí 1,8KPřed 6 lety
New Mexico Bear bow hunt HD (Self Filmed)
Louisiana bow hunt in HD (self filmed)
zhlédnutí 10KPřed 7 lety
Louisiana bow hunt in HD (self filmed)
Why didn’t you video in landscape mode? I stopped watching because you see anything looking at that sliver of a picture.
I appreciate your video but can you please next time turn your phone sideways landscape mode. We can see a lot better , just saying no disrespect... I have a 22 Road Glide special , I just installed factory 47 bars omg it is really a pain and the hand and the fingers I've used cable pulling lube which I highly recommend it helps it's still hard especially when installing kahuna heated grips which I did that made the left side harder than right. If anybody gets frustrated trust me leave it alone take a break come back later and try again and it will work...
How can i remove the pin? Will a small hammer do?
Can i ask did you pull the throttle wire and the hand control wire taped together or do you do one and the retape the chain and do the throttle seperately one at a time?
Layla in the backround has me dead😨
Great content 👌. Did you have to get longer clutch and brake cables? I have a 2022 Roadglide Special I will be installing 12" Factory 47 signature bars. Thank you
About to install my 14's this weekend and have the wire extensions. When and where did install the two wires? Into the bar? Great video.
Thanks brother!
Looks good. I did my bars on my road glide. I installed La Chopper Hammer Head bars. Yes sir save yourself some money. I’m subscribed
Came to your channel to get knowledge on bar installation; and leaving with powerful words of encouragement. Thank you for Sharing Both. May the abundant Blessings of God always be upon you!
Good video
Ive read a few places that the factory 47 bars feel too wide. Whst are your thoughts?
At 1:20, what is that 2 wire connector you are holding out of the way? Black and white wires. Thank you
What did you use to get the passenger grip off? Doesn’t show that in the video
Question ❓. Do the Arlen Ness grips work with the heated function? I can't find any grips that work.
do i need extension cables for Harley Chizeled 14" ?
Bologna sammich and energy drinks as part of a install video. Love it. HAHA.
Two extensions? Were they included with the bars. If not do you have part numbers available. Thanks for sharing 👍
Yes need that answer?
Awesome look👍😎🇺🇸 Total width of the bars please?
Why is the video so narrow?
Did you disconnect the battery for the install, just wondering. Thank you
Love that you mentioned the areas to lengthen the brake and clutch cables. 99% of all road glide videos , skip right over that part.
How is the cutting of zip ties working?
U see any reason to get sliders if u install a crash bar??
Question. I’m having a HELL of a time getting the right side wires and throttle cable in. There isn’t a lot of space. Did you run those through together or separate? The left side wires I got through with zero problems.
I fought it myself but ended up pulling everything through together. I ended up having to align everything where there was as little mass as possible being pulled through, then I just taped everything up solid so that it was uniform. Best of luck... it can be frustrating.
@@zaccrymes3256 thanks for the reply brother. One more ? Ok so you cut the sleeves off both sets of wires and taped both sets of wires together?
@@kurtweiss7068 I did remove whatever sleeping may have been binding up, but nothing more than that. It’s been awhile but it seems like I may have also de-pinned a couple plugs just to get it through and then re-pinned everything.
@@zaccrymes3256 yup. Sounds right. I’m feeling like the plugs is what’s holding it up. Without them, I think going through will be much easier. Btw, great tip wrapping the outside of bars to protect them. Wish I would have seen your vid prior but I did scratch them too bad. Thanks again my friend. Very helpful.
600-700 dollars is a great deal. It ridiculous dealers are skilled but they want 9-10hrs of labor to install these. I get it, its not easy. But jesus for a guy that has done them 50+ times they can do the install in 3-4hrs. Thats why them call stealerships. Thanks for your help making the video.
Romans 5:1-5
I have the exact same bike you just installed
How do I know what grips to get ? Are there a certain size I need for the 47s factory?
your exhaust is not factory that's why the spacers were there to move the foot controls away from the exhaust, also why they where allen and not torx. they came with the exhaust kit.
When you changed your bars did you change your bushings too? I'm going to do my bar swap and HD told me I needed to swap my bushings. Bike is brand new though and has less than 500 miles
Yes, factory bushings are pretty flimsy... so I’d definitely swap them out while you have everything apart. The install on them are easy and they are relatively cheap, so you’ll definitely want to take advantage of the opportunity.
One thing everyone doesn’t mention is when you pull on your cables for more slack. There is a plastic clamp on the front of the frame below the triple clamp. It will break! I put the 14” factory 47’s on my 2109 road glide ultra.(LOVE’EM) If you hear a click turning lock to lock (left/right) just a place to look. Zip tie it thru the frame and all good. No need for wire extensions save the loot .RSMF
Great video. Where did you get the extensions from?
I got them from my Harley shop the day I purchased the bike. Not sure, but JP CYCLES or GET LOWERED may sell them online
@@zaccrymes3256 Thanks.
That was my question. The extensions. I got 12 inch factory 47 on but I’m gonna put 16inch factory 47. U think I’ll need the extension.
So Harley of Fresno told me I had to buy longer brake and clutch cables with the 14 inch factory 47 set up ,, ?
If we’re talking about the same bike, then no you shouldn’t have to. 14” is the highest you can go with the Factory 47s and still use stock clutch/brake cables. You will have to cut some zip ties and remove the lines from a mount in order to free up enough slack to use them though! You will need the two extensions for your wiring, but everything else works perfectly! 🤙🏼
I put 14” bars on my ‘17 Road Glide as well. You do NOT need to extend any cables. Just cut the zip ties off like Zac mentioned.
@@zaccrymes3256 Hey Zac great video. A few questions; do you have the part numbers for the two wire extensions that need to be used? Now that you've had time to ride with these 14" Factory 47's, how do you like and find the handling of the bike?
Harley told me the same thing for my 19 SGS and said they won’t do the install with stock wires bc it’s not safe. After quoting me $1500 just for the install. Needless to say I won’t be going back to that stealership.
Awesome thank you !
Ye haw!
👏🏼👏🏼🤝
Hahaha bro I installed this last weekend 🤣 and I used a bigger wrench still noticed those bolts were tight! I see your small wrench im like no way I gotta see this 😂 good video bro!
Haha, I’m still trying to recover! Thank God for bologna sandwiches! 😂
Mmmm big bologna wrenches! Tighten those bolts up boys!
The music was too much....almost quit watching....great bear, congratulations!
Thanks for helping us get this important message out to others. We're so glad we were able to encourage and inspire you with our messages.
Where do you sign up to be a guest judge?? The high quality proteins make it worth judging! I am a world renowned professional eater!!!
Ha ha Dustin Clements, Diezel said all you’ve gotta do is come on!
Well, maybe not EVERYTHING you teaching...lol
❤️ 😂
Way to go, Dad! Good job teaching those beautiful youngins'!