Video

Is it better to replace the shift parts? Cause I’ve seen videos about this and people just flip the shift technology parts to opposite ends and it cools transmission temp down. And is this good to do if u drive vehicle a lot?

You saved me some big money ! So simple of a fix tooo.

i can't remove the window no matter what i do, i have done what you did and it won't buddge

I followed this step by step and Lo and behold my ryobi is running again. Thank you, just saved me from buying a new one. If it didn’t, not sure how I would troubleshoot….

Been using one of these for light duty misc repairs on things around the house, size and weight good for things like that. Currently looking into a malfunction of a spare battery, was dead but green on the charging line. An in line connection for 30s allowed me to null the auto-green and get the red led charge, but soon flashes green/red. Later I'll look into cell imbalance, maybe discharge it and attempt another charge. If anyone's done this process, let me know what issues you'd uncovered.

Thanks!

Still hit 192 today but it was 115 out.

No link to purchase the puller tool?

You expect a $900 engine in a $2,000 machine???

Why is the fuel tank moving while the engine is running?

The warranty starts after the manufacturer warranty so if the manufacturer has 5 and you buy the Lowe’s warranty for 3 years that means you have a total of 8 years warranty.

I'd say have somene hold it in that magic spot and adjust the linkage to where that is the same end position as forward spot. Or cut and make that do it for a quick rig. Some stare study required.

Beats string trimmer

id buy a kirby long before id buy a rainbow

I have really considered one of these for smaller jobs

That's pretty cool !

Thanks!

Yes but you never see both carb bolts being removed for some reason especially the bottom bolt

I have an older Craftsman plug into the lighter socket unit and my rule of thumb with it is when the gauge reads 1.5 pounds over where you want to be it's correct reading

Man keeps overfilling and leaking out of the top right hole where the choke gasket is. Any ideas on what I'm doing wrong

Thanks. Appreciate you

What a big inconvenience it's a new vehicle but it's only done it one time had it for 7 months now 2023 wrx I hold down both buttons

Thanks for sharing this. Got the mower based on your review.

Nice explanation and demonstration. 👍

I have learned, wash and oil the filter before you use it. They come way over oiled from the factory. Clean it and apply the oil lightly on the dirty side, don’t put oil on the engine side. If you do it this way you’ll never have an issue and you’ll see great power gains and especially fuel mileage gains. I have a 2013 f150 with the base 3.7 v6 and average 26.5 mpg on the highway. With a standard fram I’m lucky to get 22.

oh, this back play does not look like "a little bit". thank you for a review, I have no doubts any more about LIGE: I will never buy it.

I fix almost everything based upon youtube videos. This was great! Exactly what I needed today!

shark is probably the worst design in filter set up

Only starts when put gas in the car

Have you taken off the arm?

$900 just a few years ago.

Nicely done at a good pace and narration. Explanation was right on and appreciate your sharing helpful tips and know how! 😊

What is this for???

No, no issues at all. Had been using it for more than 15 years.

Thanks man very helpful

Hi Hank, my vacuum hose broke too, but it came off at the actual piece that connects to the wand part at the top closest to the actual vacuum motor. I have the hoover cats and dog turbo model. How do I fix this so it will reconnect inside the wand I cant seem to get the inside part of the hose which snapped off inside the wand, it must be glued down. Any advice? The place i bought it has shut down all shops.

Does this work on a 2013 Ford Edge Sport 3.7L with the 6F50 transmission?

Mine doesn't have that bar over the rear drive belt wheel . It's a 2003 model

Is there a specific torque spec for the engine hanger bolt? Directions say, "same as manufacturer spec"... 51 ft lbs broke the bolt. Any help is appreciated.

Is it supposed to only spin one way. If you try to twist it the other way does it just stop?

I changed my carb, spark plug, fuel filter, fuel lines, and air filter it was still doing the bogging I thought it was the engine. Come to find out it was this damn screen

i remember u could be a brand new car for under 3k guess i'm dating myself.

From where to buy safety guard and blades ??

Thank you

I had an ‘89 GMC Vandura, had a power steering pump leak, stopped it first bottle. Leaking a pint every few days. I owned the van another 10 years, no problem.

If you watch project farms video on these filters, it shows the crazy amount of contaminates it lets through for “ added horse power”

Thank you, helped me take it apart. The 2 hidden screws was all. The power switch is not working on my daughter's machine I hope I can find one. Maybe you have one to sell? Otherwise I'm just going to bypass it and have her just plug and play 👍

‼️‼️INSTRUCTIONS UNCLEAER‼️‼️ I have now got 2.5Litres of vinegar wish-washing around in my FU***G Engine!!!!!!

Grazie! Consiglio molto utile❤

Is this a 611.