![Ultimax Belts](/img/default-banner.jpg)
- 22
- 1 886 995
Ultimax Belts
United States
Registrace 16. 06. 2015
Welcome to the Ultimax Belts channel. Here you’ll find helpful tips on belt installation as well as information about Ultimax snowmobile and ATV/UTV drive belts.
Everything about an Ultimax belt is designed to deliver superior performance and dependability. With specially formulated rubber compounds and extra strong aramid cord, Ultimax is designed for the rider who refuses to settle for second best! The Ultimax family includes Ultimax MAX, Ultimax PRO and Ultimax XS snowmobile belts, Ultimax HQ, Ultimax UA and Ultimax XP ATV/UTV belts and Ultimax MD (Multi-Duty) belts.
Everything about an Ultimax belt is designed to deliver superior performance and dependability. With specially formulated rubber compounds and extra strong aramid cord, Ultimax is designed for the rider who refuses to settle for second best! The Ultimax family includes Ultimax MAX, Ultimax PRO and Ultimax XS snowmobile belts, Ultimax HQ, Ultimax UA and Ultimax XP ATV/UTV belts and Ultimax MD (Multi-Duty) belts.
Ultimax MAO Monster Truck Ride 2021
Ultimax Belts Enjoys “Monster” Night of Giving at MAO
zhlédnutí: 164
Video
Snow Trax TV - Ultimax Snowmobile Belts Overview
zhlédnutí 399Před 4 lety
Video from Snow Trax TV with an overview of Ultimax performance belts.
Dirt Trax - Ultimax Belts Overview and Install
zhlédnutí 839Před 4 lety
Video from Dirt Trax Television with an answer for the best reliability, best durability and best warranty when it comes to your belts.
Ultimax Belts by Timken TV Commercial 2019
zhlédnutí 1,9KPřed 5 lety
Ultimax Belts by Timken TV Commercial 2019
Enjoy the Ride with Ultimax Belts
zhlédnutí 1,7KPřed 6 lety
Collage of fun footage of the Ultimax Belts team testing our belts.
Ultimax Tips - Polaris Sportsman XP550 and 850 Drive Belt Change
zhlédnutí 10KPřed 8 lety
Ultimax Tips - Polaris Sportsman XP550 and 850 Drive Belt Change
Ultimax Tips - Polaris RZR XP900 and XP1000 Drive Belt Change
zhlédnutí 7KPřed 8 lety
Ultimax Tips - Polaris RZR XP900 and XP1000 Drive Belt Change
Ultimax Tips - Can-Am Outlanders Drive Belt Change
zhlédnutí 302KPřed 8 lety
Ultimax Tips - Can-Am Outlanders Drive Belt Change
Ultimax Tips - Can-Am Mavericks and Commanders Drive Belt Change
zhlédnutí 340KPřed 8 lety
Ultimax Tips - Can-Am Mavericks and Commanders Drive Belt Change
Ultimax Snowmobile Belt Commercial 2016
zhlédnutí 588Před 8 lety
Ultimax Snowmobile Belt Commercial 2016
Ultimax Tips - Yamaha Grizzly drive belt change
zhlédnutí 201KPřed 8 lety
Ultimax Tips - Yamaha Grizzly drive belt change
Ultimax Tips - Polaris Sportsman drive belt change
zhlédnutí 46KPřed 8 lety
Ultimax Tips - Polaris Sportsman drive belt change
Ultimax Tips - Polaris RZR 800 drive belt change
zhlédnutí 180KPřed 8 lety
Ultimax Tips - Polaris RZR 800 drive belt change
Ultimax Tips - Polaris Ranger drive belt change
zhlédnutí 483KPřed 8 lety
Ultimax Tips - Polaris Ranger drive belt change
Ultimax Tips - Arctic Cat ATV drive belt change
zhlédnutí 300KPřed 8 lety
Ultimax Tips - Arctic Cat ATV drive belt change
What tool too use too torque the primary nut. I cant keep it from spinning
Good instructional video ❤
i bought one for my 2011 arctic cat 700 H1 TRV cruiser
Thank yous so much for making this video, even arctic cat doesn't have one like this
I got 5000 miles on my stock drive belt. I can go any time now
push the gas....
I know that’s an old video. But it’s awesome thank you guys for sharing that. That looks super easy
Excellent video
Why the belt rip on that side
Check the belt😂😂 there was no belt it all brokey
Bolts don't loosen Overlapped Bolts? or do we need a specific tool?
How do u kno witch hole to thread the bolt in ?
Good video
Do I need to adjust belt’s tension? Seems like after changing the belt, my ATV feels to be a bit more slower like it does a much more engine brake. Also, it takes throttle a bit later compared to old. Talking about 2015 Can-Am Outlander L 450 btw It’d be great if you could give me an answer, also thank you. The video is very helpful I managed to change the belt myself.
I wish someone would show and easier way to get to the bottom cover bolts. They are a pain
Yeah you can take the skid plate off or just deal with it still on to get the bottom bolts. Either way it's a pain in the ass.
Hola. Cual es la medida del tornillo que uso?
Dice que el tornillo es de 8mm y que tiene que ser mas largo de 50mm, el pitch es de 1.25
Thanks man appreciate it
Thank you for sharing information and advice, will definitely buy your belt 😊😊😊
My belt is running in the same direction, but my wife isn't, what do I do?
The size socket is a 7/8 not 22 btw
🤣
will bad belt cause it to go in limp mmode
I have same thing going on how did you fix
Thank you
Bạn có thể cung cấp phụ tùng cho mình được không
Most likely it is a main bearing seal or input shaft seal leaking engine oil or transmission oil. There might also be a crack in the block or transmission case. We recommend taking your vehicle to a mechanic to determine where the oil is coming from. After the oil leak is fixed, thoroughly clean the clutches and replace the belt. The belt and clutches must be oil free to function properly.
Had no power/belt slip Took mine apart dark nasty oil all inside housing…what would my next move be?
This video is a big help on what I’m doing my 2011 outlander 500 xt
Another video by arctic cat shows having to remove both clutches to change the belt. According to this video that's completely unnecessary
Our engineers have found that if the clutch has the holes to thread in a bolt to open the secondary, then there is no need to remove the clutches. However, we suggest that you always follow the recommendations of the vehicle manufacturer.
Hi im about to try and do headgasket on mi 660r 2003... Any info would be much appreciated 👍
I'm sorry we can't offer any suggestions with this project. Best of luck and Happy Holidays!
Buenas tardes disculpe asiadonde afloja la tuerca de enbrague o clos de la grisle 350 2014 4x4
Follow the instructions as shown in the video. You'll need a 22mm socket and an impact driver. It will be difficult without an impact driver but should come off fairly easy with an impact driver.
Every how many hours should i replace it ?
That’s a tough question to answer. It varies depending on how the vehicle is being used and the driving style. Typically at higher mileage, the operator will start to notice poor engagement, a drop in speed or having to give it more throttle than normal. This may be very gradual and hard to notice. On an Outlander with easy riding, if you have not noticed any issues, inspect the belt every year or on the schedule outlined in the owner’s manual. On bigger vehicles or more intense riding, you may need to check more often. Some riders need to replace the belt annually while others can ride for years without any belt issues. One way to monitor belt wear it to measure the width at the cord line when it’s new. A general rule is to replace the belt when it has worn greater than 1/16 inch (.062”) at the cord line. The belt is not “bad” at this point but you are likely not getting all the performance out of your machine.
are your belts american made
Yes. All Ultimax belts are made in the USA in Springfield, MO.
( YAWN ). that slow speech can cause severe depression. 😁
what does it mean if i get to the end and it starts slipping? stripped hole? this is my first time changing the belt and i bought it used😐
I don’t understand your question. Please send your phone number to belts@timken.com and I’ll ask one of our engineers to give you a call.
So I squeezed the belt to take it off but I guess I rotated it and now the new one won’t go on . What do I do?
Are you saying that you pulled the belt down in the secondary and when you took the belt off it snapped shut? Most are just like the Ranger shown in the video. You have to take a tool and open the clutch by the rollers. Some are like the turbo and you have to screw a bolt into one of the 2 small holes like in the Outlander video.
My 2005 650 belt red light is coming on and I can't speed pass 10 miles. It's sounding too forced after that 10 mph. Could it be My belt or does sounds like something else?
Your vehicle is in limp mode. You have to either take it to a dealer or look for online instructions on how to reset it. It will stay in limp mode until it is reset.
0:42 Tools needed 8mm, 13mm sockets, Torx T-30 1:03 Set parking brake, let engine cool to ambient temperature 1:08 Loosen foot board 1:25 Remove clutch cover using 8mm socket 1:36 CVT system described 2:30 Expand secondary clutch using 8mm bolt from CVT cover 2:44 Remove and inspect old belt 3:10 Inspect and clean clutches 3:50 Install new belt
Where can I buy the belt for a 2007 Artic Cat 250?
Your 2007 Arctic Cat 250 uses our UA460. Type in your postal code at www.ultimaxbelts.com/dealer/search-by-zip to find a dealer near you.
When I try to take the nut off of the primary the clutch spins what should I do
If you are using an impact wrench to break the nut loose, a ½” impact should work better than a 3/8”. A pneumatic impact will typically work better than cordless. If this still doesn’t work, some people have had luck wrapping a ratchet strap around the clutch and tying it off so that it will not spin.
Thats the problem I'm having at the moment
Don't go more than half throttle fo.30 miles?? Really I hardly put that on my machine in 5 months..lol
That sure seems like a long way to break in a belt.
👍📽
thank you, and thanks for the white noise blast at 1:52
Sorry about the white noise. I'm not sure what caused the problem. We will try to correct.
en francais
The videos are only available in English at this time.
Nice video!! Now I know what size bolt to buy at the hardware store instead of buying can-am bolt $40 + dollars. Nice 👍
Cual es la medida del perno?
What are the torques on the cover
The torque specs are set by the manufacturer and vary by year and model. The spec is usually in the owners manual.
Thank you..
Well put together vid. thank you now to go try what they showed me TYTY!
Cool the other video had you take the pulleys off. Great video.
Well done video. Thanks.
Best video I saw for this job so far been looking for 2 days
Thanks Matthew. We really appreciate your feedback.
I wish all how to Videos were this straight forward. Great job guys!