Video

veryy nice :D ... I'm configuring my trident 300mm too.

Probably will still stick to my mk3, don't print that much and in terms of connectivity it's right above my server / nas anyway so running octoprint requires no additional hardware. If I do upgrade at some point, could look at running a klipper setup at some point though. Already use .6 mm nozzles, wonder how that would factor in here?

search for MGN12 rail 3d print and could not find it, the one in your description is what i need.

You have saved my butt so many times with these amazing videos man, seriously. Thank you! Really solved my webcam probelms... I was going nuts! hahah

I noticed that your MMU3 does this weird rattling noise when the Idler is engaging. I have this as well. Is this supposed to be normal?

Great again, thank you!

Great video, extremely helpful!

Who is watching this 2024

So, while i am a tinkerer, i use my Ender 3 S1 Pro more like a tool. I am extremely interested in better multi-materal management on my printer. My question is, in your opinion is the 3D Chameleon more of a toy or a tool? My printing budget is tight and I hate to spend money on something that requires constant fiddling, when I could wait and get something that is designed to print multi-material out of the box.

Hey I live in Kansas City too!! Where can you buy these at?

Hello Chris. I know this video is old but I have followed all the detailed steps and I can't get Octodash to appear on my screen. I have used the same version of Octoprint 1.5.2 and Octopi 0.18.0, I have the same 3.5" screen and I can't get it to work. I don't know if it is the Octodash that is not starting. Can you help me with more information to investigate? Thank you.

Sir plz guide me i want to speed up my 3d printer what should i do i also use tmc5160 drivers and mother board is skr 1.4

If I were trying to make a camera connect to the prusa connect that isn't a phone that can scan a QR code what would you recommend? I am trying to utilize the features or prusa connect camera snapshots while still being able to life feed my camera to other apps, curious if there is any method out there to achieve this. Thanks for posting !

Thank you, thank you, thank youvery much 🙏 even I now managed to flash Klipper to my ancient Ender 3. Awesome details and explanations for the less techie-educated.

Very informative. Well done!

Thank you for the blowtorch idea. I used a candle lighter flame to clean out a stubborn clog in heatbreak i got on a voron. awesome video of awesome engineering!

Thank you very much, there's alot of wrong wire diagrams floating around and your the only person to show exactly where things go. Thank you very much for putting up clear directions. Any other youtube video and I would have gotten multiple things wrong

when I start a print it goes right into filament change mode and if I go all the way through the process it starts printing again for about 1 second then goes right back into filament change mode

Sorry that I missed the live stream. I was metal detecting with my new MInelab Manticore. I actually found some silver coins today

I've got hundreds of models. Can I just run the same model from my MK3 at 150-200% on the 3.5? It'd be nice not tp have to slice them all again. Nice vid, subbed👌👌

Is it possible to make a control board from Arduino?

Thank you for the video. Help me a lot!!!!

To flip the camera how you want open the Octoprint phone app: Settings > Image rotation

Thanks Chris, it makes the mounting size of the mmu3 much smaller than the original I'll get it thanks to your review

Chris, do you have a list of the M codes used in 3d printing. I don't need them often so I forget them. Thank you Great video.

What about using MKS Pi + TS35 as remote? May I use the same configuration?

Was the time lapse done with octo print or beagle camera v2. I just upgraded to mk4 and mmu3 due to your great video and am thinking of trying the beagle camera v2 as prusa link/connect video ability is just not up to par.

Hmm I have two Ender 3 Style Printers here with SKR mini E3 Boards. That should work right? Also this should work with the new MMU3 somehow right? I compiled my very own Marlin Firmware for them so this should be no problem to enable the MMU if it’s only controlled by Serial

Chris, thank you for the informative video. I had set-up two C920 cameras and things were working great.. both cameras where working. Due to an issue with Raspberry Pi, I had to shutdown and disconnect the cables. When I restarted the Pi, my second camera doesn't work... when using the 192.168.58.37:8081/?action=stream command, I get Server Error. I did the sudo netstat -tnlp as you suggested in another comment and it shows that second camera on 0.0.0.0 port 8081. That config file has the http: command for 0.0.0.0. as you showed in the video. I have looked in the knowledge base but can't find an answer. Any thoughts?

Anyone else struggling to get the MCU to flash. I have a small 2GB FAT formatted SD card, have built according to instructions but it just seems to ignore it altogether, the version is definitely different (factory v0.10.0-530-g3387a9c2-dirty-20220807_204823-mkspi on it, rpi updated fine to v0.12.0-192-gb7f7b8a3)

You mentioned an issue with the Debian 10 distro, has that been fixed?? I am very new (just a few days so far, still trying to figure out how everything works) to Linux, using LMDE 6 cinnamon, after DECADES of Windows, and have also NEVER compiled any firmware of any type. I just rebuilt my Ender 5 Plus to the point of, the only thing left that is still Creality, is the cube. I also built a triple Z axis following CZcamsr "LilMikey's Big Plans" design. I have a BTT SKR Pro v1.2, and a BTT Pad 7. I've also seen videos showing the use of an old Android phone or tablet, to run Octo, not sure if that's even needed with the Pad 7. Compliments of a brain injury a few years ago, my hands, concentration levels, and just basic trust in myself when it comes to doing stuff like this, are all getting in the way. All the hardware is done, now it's just the firmware, and I just need to be 120% sure that I'm doing things right. The last thing I want to do is brick my board. What's even worse than that, is looking at my printer, and being unable to use it.

This looks like a prototype which needs finishing, i bet Bambu are worried 😅😅😅

Only thing keeps me from upgrading is losing my LGX sc . The standard prusa extruder is really bad

Looks functional now! Glad to see progress in this area. Recommended yet?

Can we see the 2 camera videos at the same time side by side?

Thanks! This helped me out of a TPU disaster

This may be a bit off-topic, but it seems like something you would know about. I'm a total newbie to the cnc world but I managed to build a CNC table to move my plasma cutting torch (see link for video of it in operation). The problem with plasma cutting and computers that send the file to the control board is that they are subject to interfereance from the plasma arc - so much so that if you don't have sheilded wires and a computer MB inside a metal case away from the plasma machine and use a parallel pot rather than a USB connection, your g-code can (and often does) stop mid-job. However, if I send the g-code file from the SD card on the control board (MKS DLC32 V2.1) by using MSK Laser app there is no computer involved, and so it runs without stopping. This is great, but the trouble with the offline controller (MKS Laser) that I use wirelessly to launch the g-code off the card lacks a Z-axis control. My control board (MKS DLC32 V2.1) seems like a nice card and I love the offline capability, but no Z-axis control (probably because lasers don't need them?) sucks. Sometimes I wan't to adjust the Z-axis a little before starting the job and to do that I need to conect my laptop to Open Builds Control first and then switch over (a pain in the arse). Any advice on how to reedy this situation? Are there any other apps I can use with my card beside the MKS Laser app? Thanks! Subscribed. czcams.com/video/97f_Xnl6_V8/video.htmlsi=6sDtdeg53bGgq2Rt

Love you very informative channel. My 1.4 regular board is slightly different. Where you plug in your z probe is where my limit switches plug in

Hi Chris i want to remove the z limit switch. Would it be possible to list the changes need to make in marlin please.

Great serie! thanks. MMU system poor compacity challenging for me... Maybe looking for a dual chanel only to save some space with a dual spoolholder and buffer on the wall

Hey Man I really cant seem to get a grasp on this stuff. Is there any way I could get you to give me a firmware version that i could use for my ender 3 v3 se that enables host action commands?

So, did snappy2 never happen?

Hey Chris awesome video! I am looking at the 3.5 upgrade but would also love to get the new X-y motors on the 4 once Prusa starts to sell them as parts. Have you heard about anything that would stop compatibility with the 3.5 firmware?

I noticed that they made some changes on the resonance compensation page. #2 is different for example

8:03 Dude! Haha A 3d printer not even worth the parts is a PASS!

How to hiden marlin logo default in bootscreen

I found an old fire tablet I want to run klipper screen on. I had the idea of connecting it to my printer and I'm hoping this guide helps get it working for me. Knowing I can connect other printers to it also has me thinking about what other things can be controlled like this. Halloween animatronics anyone?!?!

Hey Chris, I love your video's, its help me a lot Just one question I got problem whit my Smart filament sensor. It disable my stepper motor when I'm not around my printer, and it should home before resume printing. How can I fix it? Please help me Thank you so much