Video

Good job!

Bricked the lock when taking out the chamber- would have been helpful to know how to avoid that.

Welp, I must've done something wrong cuz my door just pushes open even when it's locked. There's literally nothing stopping anyone from just walking into my room now. Not surprising since this is the usual result when I try to be handy. I'm good at a lot of things, but I'm definitely not gifted in the hardware department.

Why is there an extra width on the key part of the deadbolt ? It is too wide to fit the hole in my door! 😮

If they got in and had tools it be easy to unscrew the bolts ??

So my wife recieved her flu shot while pregnant, right after giving birth she was diagnosed with GBS. Only problem is, that was 70 days after the receiving the flu vaccine. Is there anything we can still do?

Thank you very much for this great video..

My garage door rail does not have ANY cutouts…what is the best way to cut out the rail in place to install a couple of these slide locks? Any useful info is appreciated. Thanks

Our slide lock gets caught in curve

Thanks for video would be nice to have a update to this as the newer locks you don’t need to remove the core. Has a window so noobs can insert new pins

Hint: Gaffer tape the 'unlocked' lock to the door in the proposed location PRIOR to permanently fixing it in place and then run the door up and down to make sure the new lock doesn't hit anything. If all OK, you can fix it in the proposed location with confidence.

Hint: Gaffer tape the 'unlocked' lock to the door in the proposed location PRIOR to permanently fixing it in place and then run the door up and down to make sure the new lock doesn't hit anything. If all OK, you can fix it in the proposed location with confidence.

thank you so much

The key doesn’t want to come out after I unlocked the door it gets stuck what I’m I doing wrong?

Soo I have the one you installed, but I can’t unlock it. It stuck or something. How can I fix that?

Thank you

If my new Kwickset door lever set is like the one your showing, it'll be a cake walk, thanks for keep these videos posted...........

So thats what that allen wrench is for, I was worried it was for a screw in side and the latch was going to fall apart. This looks door hanle set looks like the Kwickset I just got, now i got to find the top dead bolt video cause I didn't put that in yet., Good instruction video

About how much would this cost??

This lishi tool is for an eight cut lock not ten cuts. This lock has six positions 1-6. You don't know what you're talking about

I have Ford 500 2005 lost ignition key all keys really. Can I get the code so where I can’t afford $200

I just want to know what the name of that tool is

So question - ours was installed by our landlord but when we go to lock it from the inside the dead won’t bolt fully (there’s room in the door too) but when we put the key it with the door open from the outside the entire bolt will come out but then we can’t get out key out - does anyone know what’s wrong with it? We are figuring they didn’t install it correctly. Help!

May i knw what kinda screwdriver are u using? Am looking for one like that but duno what it is called..

YOU ARE AMAZING!!! THANK YOU!!!!!

STOP. There is NO need to remove the core!!! That's a sure way to mess up pins. Watch this instead -- czcams.com/video/Wci_q4FHKM8/video.html

What about doors with spring extensions for the bottom? How do you padlock those?

They can still get the door open from the inside using your own tools that they found while ripping you off. Most people don't have their tools locked up in a high security cabinet. Even locked with the padlock, if they find your socket set, nut drivers, pliers, vicegrips, your drill and nut driver bit hand grinder they are going to open that door. The thing is to do everything you can to keep them from getting in.

Hi, My house is keyed to Schlage. However, I have two fences that need padlocks. I looked but can't find Schlage padlocks for less than $50. Can I rekey an Abus padlock to a Schlage key so I can have just one key for my property?

Great item!

The springs all fell out. Help! How does this go back together?

Thanks for the video! What happens when you lock the garage and forget, then you open it. Will the garage motor and chain break?

Hi I have a serios problem with one of those lock I need to make a key with out broke the padlock if you guys can help me with that in Orlando fl area hit that comment back I pay what you ask me . Thanks

Nicely done

Great video..thank you

I have a question. How can I determine which wafers exists in the lock?

I have a question and hopefully someone can answer it or give me a tip. How come when I lishi a Ford I’m able to make a key for the ignition but not for the door? I’ve calibrated my machine several times, but I’m still not sure why my cuts are still off.

I bought the same one my question to you is was yours a little stiff or harder then normal to turn and lock. I felt like it should be smoother to turn but for 9$ I guess that’s what I payed for

I wish you would have did a video on the other lock...

You don't have to take the lock apart to do this! If this guy doesn't know how to rekey an Abus he should have watched another video before making this one!

Now how about some video of operating the door with lock installed and bolt retracted? The lock you installed MIGHT clear the bend in the rail but the more complex alternative definitely won't. Why? Because the bolt doesn't fully retract out of the door rail and must therefore follow it through the door's full travel range, including 90 degree bend. The straight door panel to which its attached cannot track through that bend. The bolt will bind and probably tear up both door and rail.

It’s impossible for this lock to only have five tumblers(As all Ford 8-cut lock systems use six in the door locks.)P.S. I ran a bitting search of this sequence of depths in my HPC Codesource program, and the the first wafer is either a 1 or a 3.

I just wanted to buy a good padlock. I had no idea I had to be a locksmith to use these locks.

Are these reversable if the door opens from the right side when you face it from outside?

What about the people's door. My door has no stud.

so if someone has access to the garage, then what stops them from removing the bolts?

Good video, I just ordered a slide lock similar to the you just installed. Added safety when leaving for a while. Most people ignore that garage offers easy access to house(most people don't lock the door that gives access to the house from inside garage) Once burglar is in the garage then he's protected from being spotted by neighbors. And like you said, garage provide and exit door for large objects like TVs.

Thanks!!

is there a pinning kit for Abus? or do you just use Schlage pins?

Can this be used on anything that has a keyhole