Video

this is super valuable, thank you. the best tpu ive come accross is made by tinmorry. actually every single filament i tried by this rather cheap brand was a blessing so far.

will it accommodate avatar moonlight vtx?

the lite version doesn't come with the plastic parts, but they are available for printing. Also, I paid around $45 for the lite version.

are you able to provide a kit for the Atem mini Extreme ?

i am curious how good this would work filming a line of slight plane

Pretty cool stuff.

Nice one mate, very cool way to add some elements! Good to see some more of your workshop too! Hope you have a great day :)

Good review and very nice bit of kit.

this camera is very cool

Hi my friend, everything is great, I'm very happy that you're helping me calibrate the DJI o3 Air unit, I'm here watching your videos, which is very important to me, big hugs, friend

Screw AKK. They took my money and gave me the cold shoulder when trying to ask for my product or a refund after 4 months of silence. I don't want that to happen to anyone else so I guess this is my solution.. talking trash on the internet lol.

I appreciate the content your creating. I wished i copied what I've been writing in the comments lol. I've been dealing with this stack for some time. Here's my issue and maybe since you've made this video, you've learned something about it that I dont know. I've had 2 full fire blow outs, and 3 esc issues. (Just in the last few months) I'll not go back any further as some of the issue may have been my fault, who knows it was a while ago. So I've purcased multiple stacks, the ones I'm having issues with ALL came from Amazon. It's May 2024 in Canada and I'm very positive that speedybee is selling failed v3's on Amazon. I say this cause they aren't selling v4's, and every single one I've got, and returned because of these issues ...... is clearly an issue. I've got 3 5" drones. #1 i have a speedybee master 5hd with a v3 stack in it, but i got it from a retailer of drone parts here in Canada. It still flies and works perfectly. #2 green drone we will call it. Ive had 2 full blow outs. And 2 failed esc's, it just comes up as "missing esc" I see in your video your being provided with a 1500 capacitor.... the ones I'm getting are 1000. Ive replaced every part on this drone except motors..... so i was convinced after blow up (last one was a blow up) HAD to be the motors. Please note these are SUPER clean builds and looked over by pro builders/pilots. THEN my brand new Mario 5 build i went to fly, BOOM missing esc!!! Neither drone has been crashed or flown hard hard. So same issue 2 different drones, all different parts. So my motor theory is gone out the window (also after stripping it, motors where tested and passed with flying colors) The common factors, same stack coming from Amazon store. Also all stacks flashed to bluejay. Even my still working after 7 months drone is fllashed bluejay. I've read in comments that flashing bluejay on these is bad, do you know anything about this? Is this my issue? I go with bluejay for bidirectional dshot ya know? Is there a known issue with bluejay and these esc's I'm not aware of? Speedybee wants me to send back these on my dime and wait over a month to tell me its defective after clearly we know its defective. I've sent video and pics. Anything maybe you've learned since making this video you can please assist me with? Appreciate you very much!

Exactly what I am looking for! In the original video, you've mention to rename the latest version of Assistant 2. Where would I rename it and will it still work for other updates? Asking for a friend! 🙂

Where did you find the VTX table for this? I'd hate to have to manually enter it.

I have this FC, once updated from BF 4.3 to 4.5 (m10 gps), the booting sequence is fine (motor vibration) but I can’t test motor direction. Maybe BF 4.5 is not supported?

thanks man

It will be really interesting to see how you wire everything up for the 8 motor, 2x ESC cinelifter. The last 6 motor build I did had 6 individual ESCs on an APM 2.5!!!!

2:45 I'm nearly positive, you can NOT change the LED patterns from Betaflight. The UART allows Betaflight settings to be changed by the Speedybee App. The Meteor acts as an external Bluetooth transceiver for flight controllers which don't have built in Bluetooth transceivers. There are multiple reasons why Betaflight can't control the LEDs. There are 126 LEDs in the Meteor set. Betaflight can control up to 64 LEDs. The Meteor LEDs are also the wrong protocol for Betaflight. Betaflight expects WS2812B controllers on the LEDs. The Meteor uses LEDs with LPD1886 (24-bit) controllers. I hooked up my Meteor to a logic analyzer to capture the bits controlling the LEDs (I kept trying various LED protocols until one worked). I was disappointed to learn these LEDs can't be controlled from Betaflight. The LPD1886 is a pretty simple protocol so I plan to add a microcontroller to my Bee35 and control the LEDs using the microcontroller. As I said, the LED protocol is pretty simple (I'm pretty good a bit banging data protocols) but I need to get my head around the Crossfire protocol so the microcontroller can eavesdrop on my ELRS receiver. I'm hoping to control LED patterns by sharing the ELRS receiver between the flight controller and my microcontroller which controls the LEDs. Even without being able to change the LEDs from Betaflight, these LEDs are a lot of fun.

do you need it.. depends on the amount of jamming happening where your flying

Does this controller have ESC’s in/on the board or will I have to have an ESC for each motor? Thanks!

I flashed my TX12MKII with EdgeTX buddy but the hardware page in my radio under options show luac, but no lua do you know how to get the lua build option too? because I want to install Yaapu Frsky Telemetry script and it's wiki says I need both lua and luac

Great vid! My mob8 03 air isnt being good. When i arm and take it up a little then move the right stick...it just flips over (like its in acro mode). I want to tame it right down, just to fly round the house... but not sure how to tweak settings, as theres nowhere mentioning acro mode disable anywhere in betaflight of in the cli. How can i dial it right down from a crazy whoop to a nice tame slow one please?

Thanks! I just updated my charger, and now it's bricked 🙁 Do you know by any chance how to recover it? I formatted it already, but that didn't help🤷🏻

Got a link for the x8 frame? Finally ready to take one on after seeing this stack.

Thanks for another great review Whirly Bloke. I would have no reservations buying this stack. I run a SpeedyBee F405 v4 and 55A esc in my 7" diy and it's been flawless. I've had great luck with SpeedyBee products so far. Thank you for creating content that I find interesting, informative, and entertaining. Happy flying amigo 🫡 🍻.

Anything over 5 inches is just too big and too heavy. This is coming from an engineer and the radio control industry for cars, boats, quad, copters, anything for the last 40 years. Lighter is always better.go with the 5 inch quad copter and skip the big heavy one.

ITS beautiful , now I will build a cinelifter...the time has come....thanks Whirly Bloke SpeedyBee...is Quality

Wouldn't it be beter to change it using rxrange in the cli , I know a lot of fpv pilots like to have multiple kwads on a single model.

How does ist behave downhill, does it brake via the engine that it doesn't hit you in the feet?

At this point, slap a arduino, servo, rx5808 module with rssi out, and a directional antenna onto this and you just build a radar.

Any mod to use the z-axis thing with just a phone or osmo mobile gimbale ?

Nice, a VTX that draws half the power as the craft it´s in! 👍 I am always getting annoyed if my flight time is too long.

Cant wait for 40watts 🤣 🤣 🤣

Why not just fly a 1.3ghz vtx?

can you switch power from the remote?!? so i would then fly with 500mw or 1w... and only swifch to full power when needed

looks like a beast of a vtx, i would buy one for my 7 inch lr but i had terrible experience with that 3w ultimate vtx from akk. that thing sucked.. terrible noise and less range than some lower powered vtx's

oF is this some foreign language 😂

Another terrific video, so well done. Get it? Well done, nyuk nyuk nyuk

Was going to put this on a 10" but ended up not doing it.

10w?! Does the antenna glow?!

Fry your breakfast on that lol, nah not too bad although I would be tempted to take it apart and put some arctic silver on it see how much difference it makes, good video.

When i balance change it shows cell error plzz reply but it is doing normal charging

Will it stop charging after the battery is fully charged or do i have to unblug it plzz reply

Пажилой обзор

VTX power wouldn't give you possibility to fly under the radio horizon, but just for the longer distances

Thanks for this amazing video! Just ordered the Bee35 and will do a self build 🙂 already have a speedybee drone and controller plus goggles so just adding to the collection

Fantastic. Personally I’d preferred to have the ‘power and connections ‘ in the space above the ATEM mini. That way the case will remain intact and waterproof.

This is insane lol. I thought 1.6w was powerful...

10w is wild!! Lol I thought the reaper extreme 2.5w vtx was a lot lol

Get a directional antenna so you could have a 5.8 signal jammer lol :D