Video

Can you show me how to take out the upper disc tension disks. I think the spring is compressed as it only clamps the cotton at 9 when i wind the wheel down to adjust the tension it totally releases, so it's all or nothing . Pretty please

Thanks for the video. Unfortunately, my bernina 730 record must be older than when they started using this system! Instead there are two big slot-head screws in a similar position. I'll try fiddling with those to see if that does anything

Thank you so much❤❤❤

Why is my sewing backwards

Merci pour cette vidéo c'est très bien expliqué

Very many thanks for teaching us how to fix the needle bar disengagement problem. Best regards

The priblem with Pfaff is parts break and cannot ger repair parts.

how much did you sell it for

whish my 4423 had speed control

Need needle for this machine..what size

اشتي اعرف سبب عدم لقط الخيط

I have one but mine is called 'mon ami' made in France. Unfortunately the case is broken...

Mr. In Stitches, you are 10+! (Sorry, I don't know your name.)

Greetings from Rio de Janeiro, Brasil. There is one for sale, locally and I found this vídeo. So, is this a plastic sewing machine? I have a "Singer 15-like" Husqvarna and a Viking with the baquelite wheel. If this is a plastic machine, I will let It pass.

I just received a Kenmore 385 22 stitch that looks like this so I watched your video. The reverse wasn’t working. After watching your video , it now goes in reverse. Thanks so much for this video.

At 4:55 when you remove the lower belt, did you loosen the screw first? I'm trying to remove mine but I don't know how much force is needed. I'm pretty sure my brushed need replacing. Thank you so much for sharing this!!

Thank you so much for your help ! Oiled it and fixed the reverse .

Porque no ponen traductor

Merci pour l'effort et la sincérité avec lesquels vous avez réalisé cette précieuse vidéo.. Merci particulièrement pour le problème que vous m'avez aidé à résoudre.

I’ve been following along on my D53A but the tension spring was mounted differently, please do you know if the spring was tensioned somehow - it did seem like it. Thank you

Hello, can you please help me? I need the engine belt I have the same sewing machine (Husqvarna 21E), and the drive belt cut. I live in Antofagasta Chile. Greetings and thanks  

I just today picked up a Singer Starlet from a second hand shop here in The Netherlands. It looks like a '74 model. The press-in mechanism on the hand wheel seems to have perished, but I'll see if it still works. Thank you so much for these videos. I'm curious to find out if I can get replacement bobbins and needles. I hope they're pretty standard and not hard to find. You've been a big help. Thanks so much!

Thank you, thank you, thank you! My Kenmore would not reverse and I was ready to throw it out. It was an old trusted machine that I’ve used for 40+ years. Your clear and concise tutorial has it up and running fine once again!

السلام عليكم ان هذا الفيديو أفادني كثيرا ، لأني مؤخرا اشتريت مثل هذه الماكينة ، ولكن هل يمكنك افادتي أكثر فيما يخص الخيط المخصص لهذه الماكينة ؟؟؟ في الأخير أقول لك بارك الله فيك

God bless you sir

This is by far the best video on yt for this make and type of machine. I have 2 Wertheims that are allmost identical, one wooorks the other not - not sure why yet. How would we go about adjusting a needle for these machines. Mine is an 1890's and Im assuming its a 12 x 1 needle, how do i replace these - yeah, I know theyre rare!

Thanks for that really clear instruction. I’d also like to give some other information which may help some people as well. My wife’s Janome had the same issue so off to the repair shop it went. Response, “it’s an electronic issue and can only be fixed by replacing ‘the board’”. Also, she found that after this repair, the reverse and forward sewing direction reversed!! That is the machine ran in reverse when forward was selected and forward when reverse was selected. So machine sat for years in the corner with my wife not having the courage to “throw out” her favourite machine. So fast forward to my retirement and decided to learn how to fix sewing machines so I can fix and maintain hers. I watched your video and it was fantastic. It fixed the “slowness”, but not the reversal. I also realised she was lied to as there’s very little in these machines that is actually “computer” controlled. The lights, motor speed and needle down……..that’s about it. I played with the machine for days and realised the bar that goes from the reverse selector goes to a join and then another bar to the feed dog. And, when I ran the machine forward, the feed dog ran back and visa versa! Why I kept thinking. Then I realised this “hinge” between the selector and the feed dog was way back in the machine. So I stuck my finger in and started moving the hinge forward. And after came forward past the pivot point, bingo, the foot ran in the correct direction!!!! Couldn’t believe it. The problem was fixed! Clearly when trying to repair it, the mechanic had pushed this back and reversed the direction of the feed dog. I know this makes little sense with no photos. But hopefully you get the gist that if you have this problem, the fix is simple. Well simple after days of thinking about it.

Thanks so much! This fixed the problem I was having. The manual only shows three top oil spots and two bottom oil spots. It seems there are many, many other oiling places.

Thank you for sharing your knowledge!

I literally took my sewing machine apart.... I spent hours and I am a new sewer so i nearly gave up on the whole plot! You saved my new hobby and I thank you immensely!!!!❤❤❤❤❤❤❤

Fantastic video - so easy to see and understand! This was amazing and helped me save money fixing my Kenmore that suddenly stopped reversing. I watched your video all the way through, then step-by-step as I did it myself. I felt so accomplished! Thank you so much for taking the time to help others with this easy fix.

Thank you! I was pulling my hair out. Love the close ups and the tempo!!

Just found your channel today was browsing your other videos and saw this, though too late but my deepest condolences.. I also have a cat and is now around 10yrs…Molly must be the sewing star in Cat Heaven, 🙏

I’m about to unbox my FS60S tomorrow! Wonder how’s your machine been after this video? Hope this machine can last for like few years… just worried as it’s computerised.. And I shouted when Molly’s tail 😹 And thank you for patiently making this video and sharing your knowledge to the world!

👏🏼😎

Hello! Found your video and the exact thing I was looking for, you skipped😂 Could you please show how to remove the knobs? I found one for free but according to the previous owner the tension in the lower right knob is broken due to rust. It does not click when turned, as the others do, so I was hoping to find a video showing how to remove the knobs. I'd be grateful!

Video cok faydalı mekik alt milin küçük dişli çürümüş bize bir önerin varmı İstanbul da yok bu dişli

❤❤❤

how do i remove the wheel on my sewing machine

I am interested this masine purchase this masin how is possible

How is possible parches masin

Hi Gary, thanks a lot for this video, who helped me a lot while servicing a Phoenix KI-10 found laying on the road. She works perfectly now! One question: did you know where in can find those special needles? The one on the machines is stamped with 12-80, and has the grooves like yours in the video. Thanks!

Thank you for this. I was ready to rip my hair out.

This is wonderful info! I have this exact machine with this exact problem! Thank you so much! BTW what oil do you recommend for this machine? Cheers

Thank you, your tutorial is perfectly clear 😊👍🏻

Excellent video, perfect lighting and close ups were super sharp. Sir, your video is the best close up, correct lighting I have seen so far!!! So thankful for you sharing your knowledge! Thank you again for fine work on video! 👍👏👏❤😊🫡

thank you! i love my little 830. It's a work horse. i have new berninas too, but i go back to the 830 for mending and repairs on heavier fabrics

Is this Elna TX the latest or the best version of The Lotus series?

I got mine from goodwill for 14.49 barely anything is wrong but it does need some minor adjustments. Surprisingly the cam is in really good shape But I also have the 3d printer files and a 3d printer so I'm good on that. though it didn't come with the power cable so I ordered on on ebay and freed up the stuck knobs with some good ol pb blaster.

Thank you thank you! You saved me over $100 Canadian. Right at the part where you said don't lose the E clip, it popped out of my hand and took me half an hour to locate. LOL Other than that, brilliant video. Thank you so much. Even though mine was a Kenmore, it was identical.