Video

i got one, i like it. real portable, runs on 110, that synergic thing works great.

brah-100% CO2 sucks, use anything else 75/25 or 92/8

I switched to using my Bauer electric saw because I buy slab wood and cut it up at home instead of regular cord wood cut out in the woods. I started using it exclusively because of the price ands it readily available here from alot of sawmills in my area. The Bauer electric saw has plenty of power ( as much or more than my 16" gas saw) and it cuts fast, Just keep the chain sharp and the oil tank full and your good to go!

So you don’t need gaz ?

Thank you, yea, total noob mistake, thanks for the comment, take care.

I was hoping for an intro to the ARCCAPTAIN MIG130 but the clown turned me off.

Good video. Why no comments yet?? Weird. I have that unit there so this has been helpful. I purchased and extra 25' of hose. Dude you really forgot to bleed the line before hitting the on button.

Prestige World Wide!

No need to over think it. It's just a momentary on/of switch. The polarity of the wires doesn't matter.

I bought a Bauer 16" electric chainsaw a year or two ago. I have cut up three or four cords of wood with it and a Poulan 20" gas saw. Never had an issue starting the Poulan. The Bauer has been very good chainsaw. I cut up some logs 30" in diameter and would run it full depth in the log, and it would cut right through without stalling. Would like a better bar for it because it will vibrate and wobble sometimes. I will use it until it fails, then I will probably go buy another one because it's cheap enough.

I don't like that you can't run 200 amps with .8 wire. Other than that minor issue it seems to be a decent machine. I see in the comments you can get all 200 amps if you tell it you have 1mm wire loaded so it isn't a big deal. Would love to see you connect an ammeter to the output and compare actual amps to the number on the display. It seems Amps are much smaller in China.

My Arccaptin Mig200 came with a 220V plug and a 220v to 120v adapter.

I have one and becouse is dc i like to ask all you guys if i can weld aluminum with hobart 1/8 aluminum electrodes rod 4013 EP el3ctrode positive let me know thanks

I just ordered one. If anyone knows what the contract tip part number is and if any big name tips will fit this welder

Welding is an art. Cool to see a video with welding FOR art.

They do sell a better torch for the arccaptin

The arccaptin has a light inside and yes you can change the liners but you can get a spools gun for aluminum and it will take 40 lb. Spool of the small rolls

25/75 should be your gas. Use 1 amp per .001”

Y2K WOOT WOOT, sorta wish I could go back. 4th grade, yeeyee

Would you say it rivals Lincoln 4C lens

Mine never stays dark , any idea how to fix the flash

You sound like Will Forte

Are you running this machine on 120 or 240 ??

Weird mine is the opposite has 220 plug and you can neck it down to 120 , wonder if they’ve just recently changed that? Either way I’m very pleased with mine , most ppl don’t say anything about changing the pre and post flow in the settings on the arc captain along w other things, with the machine off , hold the middle button on the right before you turn the machine on and it will come to I think 7or8 diff settings you can change, it’s in the booklet but a lot of ppl don’t mention this

A other thing you mention adjusting the valve i just run that wide open whats the point to adjust that smaller one thanks for anybody who answers

I got a question i got a vrm vsw vrw its a thousand dollar argon reg now when i set its flow should i set it up to where i want once the gas valve is open or should i depress i the trigger and wat to see where the needle drops which is the rights way to read as the gas is flowing while your welding or just set to the gauge before you hit the trigger kind of confusing but if i rember you want to hit the trigger and see the drop so i run at 30 cause when the tigger is pulled it drops to 25 if that makes sense

I seen these on Facebook and there less than half the price of my harbor freight Vulcan helmet. Curious to see how they compare.

I just ordered one. They were $139, but had a $20 off coupon going. I own a more capable welder, but using a 220v extension cord, and dealing with a bottle is less than ideal. I've been curious about trying out one of these 115v flux core machines. If it handles up to 1/8" I'll be impressed. Having stick capability is a big plus as well. I tried my son's low cost stick welder, and found the display was reading on the low side (compared to what we are use to), so just turning the power up a bit more helped.

I bought a Argon bottle-supposedly, but it is slightly smaller than the 580, do you think they sold me a Co2 bottle instead and filled it with Argon? bottle is Blue.

More info... So I saw this buck, apparently defending this wounded doe, stomp a rabbit that got too close, then proceeded to lick the dead rabbit. What kind if behavior is this?

I'm about to buy my first tig welder and am trying to decide between this welder and the yeswelder tig-205p. The yeswelder has pulse and a few other features that the arc does not but I like the larger more common dinse and the torch on the arc. Since you own both brands in mig do you notice much of a difference in basic/overall build quality? Functionality? Thanks for any input

Sorry for the spelling mistake supposed to say at the bottom Appearance and penetration sorry for the mistakes my phone's a piece of crap

Go out and get yourself a bottle of c25 you'll see a big difference from the CO2 oh at the end of the whip that goes into the machine that is a European connector the arkcaptain that is much better than the yes welder hands down remember pick yourself up a bottle of c25 and always remember when your welding stir your puddle if you need any info I've been welding for years

Yes welder you can polish a turd but it's still a turd

Yes welder absolute garbage the company wouldn't even stand behind it

From what I heard Arc captain made a 50$ hood that tells Lincoln 300$ clear view lens to F*** off get out of my market boy

Nice vido and build, I just got my arccaptian 200, have not used it yet, was wondering what size kendorff that was that slides inside each other, thanks

Nice hood. Is it made in USA?

Actually you mentioned you did run it in 220V. Try to trick it by selecting 1mm with your 0.8mm and see if you can boost the Amperage.

About the Amp-cap - thats because you only got an adapter for 120/220V - it wont give you the maximum with 120V. And i think you have to set it to 1mm to get it all, also. I have to mention one thing, not meant in a bad way. You guys uses imperial standard, together with Liberia and Myanmar - (even though some companies migrates towards the metric standard these days) and 120V. Like some of America. But the states represent like 4.2% of the world population, so it makes sense that they look at the bigger picture. Maybe you should too ? :) And it will all be fine and dandy.

Great review, thanks for creating and posting it. I just now ordered one on Amazon .

Got one, love it.

Its soooo low at 10amps, i couldn't get anything but that wandering arc, i bet you'd be surprised that even at 20amps, you coud do some very delicate welds, jewelry, electronics, etc. Good luck, and thanks for watching🙃

I see the Arccaptain claim a minimum TIG amperage of 5 amps, while PDF manual states a minimum TIG amperage of 10 amps. From the video, I take it 10 amps is the minimum. That's about the lowest in this price range, but I'd really like a 5 amp minimum for small, fine work.

nice, ordered one last week, they don't cover anything on how to install and set the drive roller??

Good idea !👍👏👍

👍👏👍😍✌️

What is the duty cycle

I just bought one, its great