Video

Good review!

Amazing piece of work. Very tasteful!

Bro I had same issue bed wobble I the middle and extrusions are not parallel but I couldn't fix extrusions. Tightened a bit at font and rear ... and also top led light of my printer is not working

If you think the saw is going to kick back, don't stand behind the workpiece!!!

Badger is that you? Dude you sound just like Brandon Mayhew who played badger in breaking bad I mean you literally sound identical to him.

After market nozzles man dude at Microcenter sold me the wrong pack it was a 1/8 inch off cause a cavity that filled up.and.exploded with polysmooth filament 😢

good 🎉

Konock-off? Are you idiot? Honest question.

Neseeitas medidas

Another upgrade that helps: use copper heat blocks. They are much more robust, and more fire safe.

hey boss... the K1 hotend fits this.... works way better, way better design than the sprite default. You just have to adjust the parts cooling design or try a new one for the K1 hotend. the Trianglelab CHCB hotend in the same shape as the K1 mount also fits. CHEERS

I bought a Creality CR-10 back in like 2016 or so. I've been wanting to do some upgrades to it and when I priced what all I wanted to do to it and how cheap these have got since you put this video out decided to get a CR-10 Smart Pro at Microcenter. I have to admit I got a Bambu Labs A1 as well got really good deals on both as I only paid $399 for the CR-10 Smart Pro. I couldn't just become one of these Bambu fan boys and not throw a little support to the Creality side of the business.

An angle grinder would make cutting hinges easier, or cut the hinge barrel first then the wings.

I really love the way you display that Sets with the street and the car, so I want to build a street like yours. I can order the plates in "Light Gray" or "Light Bluish Gray" and dont know where the different is and what kind of color i need. I hope you can help me!

False fake savings!! Granit outlasts ordinary sandpaper by a huge margin.

Thanks for a good, down to earth, well paced review and for not doing any sort of "...this is what all six sides of the box it comes in, looks like" crap.

I just bought the CR10 Smart Pro 3D Printer and the filament feeder rotates backwards right out of the box. It breaks the filament off inside the feeder and does not extrude any melted filament. I can rotate the feeder by hand in the opposite direction and the melted filament extrudes as it should. Good luck getting service from Creality.

Thank you. Looks great to me. You did a great job.

I destroyed two hotends in a shirt while with mine. First the two screws holding the heater block snapped off as I changed the nozzle. Now the nozzle thread was destroyed when I changed, because it was too soft, since I heated it some to melt the plastic so it'd be possible to remove. Thinking of ditching the sprite extruder entirely and replacing it and hotend.

You back the nozzle out, out the heatbreak in as far as it can then tighten the nozzle against the heatbreak. The upward pressure from the nozzle will lock the heatbreak into position. There is no need to grab the fragile heatbreak with pliers. It is hotend 101

whats your favorite between the tea shop and steamed bun. im planning to buy atleast one for now but i cant pick since theyre both so good

That's it, instant subscription 😊

Now that is a classic delica right there. I remember riding one of those before in 2008 when i was like a 1 year old 😂❤

Не хуя не понятно но очень интересно😂

I think I have the same or similar issue. I just finished 16 hours print with tpu and ss nozzle, checked on the hot end to see blobs and almost burned filament all around the nozzle and covering most of the block. decided to heat it all up after cleaning to remove the nozzle and that came out with the internal threading of the heat block and can't fit any other nozzle now. Also, I always felt the heat block had something not right about it and seeing your video just made me aware that it was not tightened properly which is a problem I had with the entire printer that almost nothing is tightened and that kept bugging me for a time until I realized it and worked on it. the only part I didn't touch and checked is the heating block. If you may, I'd like to get some advice on what part or parts I'd need to fix that. I've been on amazon for around 2 hours and I'm not sure if I need only a throat tube or an entire heat block to get back to printing again.

Thanks for the video. I’m not hating but I have to say, you bought the wrong one for your situation. You should of bought the “5”, more aggressive with the same results. Also you should look into 3m Cubitron. Heck there are many options for paper. I guess it comes down to how long you want to be sanding. 50c a sheet is cheap considering this could not only cut sanding time down significantly, but quality sand paper last 3 times as long as the cheap stuff. Just something to consider.

ok, i liked what you did, i liked your approach on how to tackle the car and so on...this is the first video i have ever seen from you so im going to subscribe !!

Clean asf I want it lol

nice job dude!! car looks great!

I liked your review, thanks

great van. just spied it on wicked works, thought it was a delica . super fun.

isnt that where peter griffin lives...pawtucket?

Looks cool, but might damage ya barrel

I’ve been recommended the Prusa Mini+ and something from b…the Ender 3 series. When looking at the Ender 3s, I saw that there was a flash sale, selling this CR-10 Pro for %50 off ($399)! Now I am really tempted for such an amazing deal. Would you recommend the CR10 Pro over other printers the same price, like the Prusa Mini+? Any other recommendations? Thanks!

Had nothing but problems getting this NotSoSmart POS to print anything. No matter how many times I level the bed…disaster. There are so many other options for printers in the 700 to 800 dollar range… Amazon sending UPS to pick up tomorrow. Thank gawd. Sure am lucky to be able to get my money back for this one. Sorry for those who can’t.

Thank you for this video.. Been looking for review video on japanese brands.. keep going bro

Thanks for the video, what are your thoughts after a year on the printer with regards print quality, reliability, any hot end issues and how easy are they to fix?

I'm a hobbyist, but I have a good reason to invest in this sander. I'm disabled. I physically CAN'T sand in long sessions like I used to do. Any tool that extends my work time is worth it. 100% Thank you for running me through the details. This has been a tough decision.

Got the same issue on my 10 smart out of the box

I had the same exact problem couple weeks back and broke the heat break while trying to screw it out. You have to disassemble everything when the hotend is hot. I had the most success at 280C however it does burn any filament residue left in the hotend. It is such a nightmare to clean the hotend if hot filament slip outside the heat break like it happened to you. Just recently broke the hotend again while printing an overnight 8hrs part. It messed it so so much that the nozzle riped the teeth of the hotend and came out. When I stoped the print, it didn’t have a nozzle and formed a filament waterfall above heat block. Due to all the extruder movement, it also removed the entire bed from its rails. I have absolutely no idea how that could have happened but when I stoped the printer, 2 of the adjuster wheels for the bed where laying on the ground, somehow removed themselves from the screws. Needless to say, some damage was done to the bed but nothing serious. I must say the auto-level in cr-10 smart pro probably doesn’t work since the nozzle scrapes the print itself as it travels during the print even though the z-offset is well adjusted. I used calipers to make sure all the rails are well aligned before however for some bizarre reason my bed is always crooked and cannot get good results in larger prints. I think the hotend design is poor and needs third party mods. If you know any that is compatiable with cr-10 smsrt pro, let me know :)

Love this. I Can’t believe the splendid original condition that you got. In malaysia you can find only with 1800cc petrol engine 2wd.

💯

I've been looking into some of these sets on the CaDA website and since you aren't being sponsored by them, is their website authentic because when I went on it, it seemed pretty sketchy compared to others. If I ordered a $200 set will it actually be delivered?

Nice review as I am currently jostling between the E3 S1 Pro and this one. Instead of glue stick... have you tried using hairspray, or does that not work so well on the PEI sheet vs the spring steel ones?

tightening when its hot should solve the problem. just be carefull do not burn yourselfs and use proper tools

Micro city has this now for479. But I saw a cr10 on sale there for 379 and was ready to run out and get it. Saw there was a review and 2 people said that the ABL did not work. So I looked at teaching tech for a review and he confirmed the abl was not good and talked to creality and they said the bed must have shifted during shipping and to level it mechanically . He told them isn't that what ABL is for to adjust for that. Now here is the kicker it has no bed leveling screws. He had to take the bed off and put shims in. Then I thought about the cr10 smart pro and watched your video and I see it has manual screws if you want to go old school. Nice video learned alittle bit more. PS creality is notorious for letting the consumer do their research for them finding the bugs and such. I'm also getting a lot of info just reading all the comments here. Good job.

Have you tried the mesh sand paper to see if it works? I'm looking to get that sander also

So you can't just swap out the USB switch for a standard plug and have it work? Got it. Actually super informative. Already have the set but haven't built yet. Thanks!

Hi! I love your addition of the alleyway and truck. Were these made with extra bricks from the set? It’s such a good way of showing off the sides and giving it more life!

how much cost a custom Root Beer seiko ? thanks