Video

Happy to have helped. Sad that this is still an issue all these years later.

@@lucasarenas1922 glad I could help. Thanks for watching

@@jocool7370 Thanks!

Did you reboot your PC after installing the Zadig drivers? Also make sure to run Zadig as an Admin.

That was the idea on my reaction to the Verge. I wanted to use the video as a tool for learning and not just bashing the guy.

@@dimasprastya9971 what?

@@WiltshireTutorials add VGA like ur pc sir 🤣🤣, because i use sff to

@@dimasprastya9971 Ah I see! I got a little confused with the wording.

@@josegerardogarcia7929 seems to handle it just fine. I ran it OCed for months without issue

@@WiltshireTutorials thanks bro, you are the best

@@josegerardogarcia7929 no problem. Let me know if you have any more questions

@@WiltshireTutorials I have another question, I would like to know if it is possible to install a conventional ATX power supply in that chassis, I understand that it uses SSF power supplies, but is there a way to put an ATX power supply in it? And if possible, how difficult is it? I saw that you have a video modifying that chassis but it doesn't go into detail about how it was done, I have that same PC and I would like to put a better power supply on it.

@@josegerardogarcia7929 The answer for ATX PSUs is no. It will not fit. Only SFX PSUs will fit. The Optiplex actually uses it's own proprietary form factor, but is most similar to TFX PSUs. It's not difficult for the mod. All you need to do is trace the dimensions of the SFX PSU on the back and cut out a part of the case. That's all.

@@is_this_dez3598 just a simple adapter cable that can either be made or bought

@@WiltshireTutorials where can I buy it? Or how did you make it if you did

@@is_this_dez3598 I personally made my own. However, if you don't have experience with using a multimeter or soldering, I suggest just purchasing one. You can find them on Amazon or MODDIY

@@leoihenacho-oi5fu glad I could help. Thanks for watching

@@feridsan4984 Happy to help! Thanks for watching

@@user-ug7km1tw2w More powerful than you think it is.

That's an awesome thing to do for your grand daughter. For the Hal Kelly Wetback. I wouldn't recommend anything smaller than 15HP. It will be difficult for the boat to plane with anything less. I would also recommend the Glen-L Tiny Titan over the Wetback for a beginner's build. The Tiny Titan is 2' short and I used to run a 6HP Johnson on mine with no issues back in the day.

​@@WiltshireTutorialsI sent you the link but CZcams deleted it. I think it might be a tiny Titan.

@@MichaelSmith-jv7zm I have links disabled on my channel to avoid people linking inappropriate or malicious things. I just have to approve the link, I'll take a look at it!

Hmmm, I don't see the link at all in my held for review area. Was it a video or a link elsewhere?

​​@@WiltshireTutorialsFacebook Marketplace , miniature hydroplane in Carmel Maine, if you look it up it's the red and white one. I think it's a good deal, going to look at it Thursday or Friday.

I also have gotten my hands on one of those Frankenstien cards. Haven't had the time to test them out yet!

@@WiltshireTutorials lovely low power card with pretty good performance, i havent had any issues using the community drivers from the frankien drivers website

@@WiltshireTutorials my only issue with my card at least is i cannot turn up or down the power, clock speed or anything, and the one i have also has NO fan speed control. Even after reppacing the fan with a pwm fan (mine came with a normal 2 pin fan) it had no Pwm output on the connector. I feel like if a shunt mod was done, nothing would happen, i hope you get better luck with yours

@@joshwayop5413 Hmmm, what driver did you install for thebcard? It very well could be a driver issue for it!

@@WiltshireTutorials latest frankein driver from the frankienstien drivers website for it, its not really the drivers fault, part is the fact that the drivers are modded community and partly the hardware that makes this even work at all, These card do NOT work with nvidia official drivers, thats why frankenstien cards arnt too big of a thing but have great efficiency

@@4777512 EVGA never made a single fan version of the RTX 2060 Super. Just the RTX 2060

@@WiltshireTutorials makes sense, I Have fuzzy memories about it, even the cooler was diferent and 2.5 slots

@@4777512 all good! Sometimes there are way too many different models of GPUs lol

@@POWDR gotta love it lol

@@spacecy As was I good little card for some solid 1440P game on the go!

@@WiltshireTutorials yeah 👍 awesome video, thanks 👍

@@escapefromdubai187 It's what's inside that counts, not looks 😋😂 It is pretty nice now to have to use any cables for a GPU, I'll tell you that!

@@DarrenPC Yes, I'm aware of that console command. I run games at their stock settings when I benchmark with no mods or extra commands. Really good tip for others though!

@@amigodesigns it truely is an amazing little powerhouse. I'm definitely going to get my hands on an RTX A4000 SFF ADA. I will also be shunt modding that card when the time comes. The SFF market was kinda dry for a while, but it seems like companies are realizing there is a market for it! Hopefully more SFF stuff in the future.

Glad you liked the video! I plan on being more active with uploads. I'm gonna try at least! You could achieve all of this for much cheaper, if you have the correct tools or know someone who does.

For this mod, I decided to skip the Copper shims for the memory and use thermal pads in between the copper heatsink and the memory. No issues for the memory temperatures that way, thankfully! Would love to see your results, if you decide to take another shot at modding your A2000! Those dimensions are correct for the copper heatsink. You will have to drill and tap threads into the block for the 2 retention screws on the back. Yes! You can go that route. Currently I'm drawing my additional power via the PCI-E slot. Which has the potential of harming the slot on the motherboard, if it overdraws too much power. To mitigate that risk, you can solder a 6-pin onto the shunt resistor to provide the additional power needed by the shunt mod Glad you liked the video! Thanks for watching.

@@Frizy-- that what happens when you don't upload for 5 month 😅😋

@@WiltshireTutorials LOL

I see what you did there...

Fair enough! The 8-pin header will make no difference unless you shunt mod the card to draw more power. The only benefit will be not having to use the soldered on 6-pin extension Nvidia did. The heatsink upgrade is definitely worth it!

I'd try the HP DV6 config profile

@@WiltshireTutorials Unfortunately, it didn't work for me. And I couldn't find the laptop configuration. I'll try to search for close models.

I'm glad I could inspire you to give modifying a shot! I'm glad you enjoyed the build process too

Glad to hear that!

Glad I could help. Thanks for watching

For some reason, your comment got marked as potential spam. Sorry about that! As for you question, the only thing I really did to get the TFX PSU in the chassis was to drill out a few rivets that were blocking the PSU from seating against the back of the case and trimmed a few pieces of metal that were in the way. Pretty simple and I don't think that warrants a whole new video on those tiny modifications. Either one of those PSUs will work. It all depends on what GPU you want to use and how much power it draws.

They still seem to be active on their IndieGoGo www.indiegogo.com/projects/picopc-world-s-smallest-mini-pc-for-gaming-work#/updates/all and have an active website at picopc.net/ Maybe they moved domains or forgot to renew the other domain? I'm not sure. I'll look into things.

"You're a Wizard Harry"

I used a fan splitter that allows me to connect multiple fans to the fan header on the motherboard.

​@@WiltshireTutorials Thanks so much for replying so fast. I just sent an order through for the splitters and fans themselves, but I've been wracking my brain to figure out how that would work. Hope I don't have to return anything. I'm working with a 5060SFF and looking at the Noctua 80mm for the front but it says to not connect it to the fan connector as its a 5v and it would get burnt out by that 12v connection (?). So what I've got so far is a SATA Y splitter and a 15 pin Sata to 4 PC fan connector (I'm hoping to get three fans in the back for exhaust, I saw someone with a 9020 do that). And I forgot to say, but amazing video. It makes me want to get into customizing the cases, it looks like a lot of fun.

@@MrOnepiece14 I recommend getting one that is a 5 way splitter with a connector dedicated to the CPU fan. The one I used was this one: www.amazon.ca/ThreeBulls-Cooling-Splitter-Adapter-Computer/dp/B07M5P7VHG/ref=sr_1_4?crid=3E5UI3R5ZDB5K&dib=eyJ2IjoiMSJ9.0Wa20GQf1zt73HFnOAb4scGU3SIFtNyt45cdH3zWyb7TJnZx7yRuTD-opEhyC_u0NVwFAq9dwPre5cgUpWXBdbzOffGhB4ujqkK_6kHnjT6_tJLrpSMdYz97u3lrhOVvitQvBT77B4Yx1z-nrQiwnwak0_kh0_Vx2b8fb4-br_79bmBRjXhae3r_Aq82ta7u22_THxRtGvMMMMp0skl3Pe5VE9vX2HxXsii_-7zkjTQOWrKIBD1JJR2usZx7hHKNnBAMxsFREzEv6ey_IFjE2HxU9DH5gizdCygRV-bdMVI.gbBsnZxmni4fslSCwsN990rH5r8521pGnB29MFl1KW8&dib_tag=se&keywords=fan+splitter&qid=1719247429&s=electronics&sprefix=fan+splitte%2Celectronics%2C103&sr=1-4 There is only one fan header on the SFF boards. The MT have two. Noctua had many variants of their fans. They offer 5V or 12V for different electronics other than PCs. You'll want the 12V version for a PC. Do not use a 5V variant fan as it will burn out the fan and possibly the motherboard. Glad you like the video and that I'm able to inspire you to pick up some case modding! Let me know if you have any more questions. I'm always around.

@@WiltshireTutorials Oh man, thank you. With that 5 way splitter I should still be able to have my shroud+heatsink powered still, right? Also would the Sata Y splitter cable and the 15 pin sata to fan connector still be necessary? And really, thank you for telling me about the 12V variant, I had no idea it existed. Gonna cancel the 5V immediately.

@@MrOnepiece14 No problem. I'm here to help! Are you referring to your CPU cooler? Not sure what you mean by "shroud+heatsink". If you feel like you want to add another fan at the bottom of the case, like I did, then you'll need a SATA power to 3/4-pin fan adapter, yes. You won't need the Y splitter, if you buy the one I linked.

Glad this old video still has some use! Thanks for watching

Glad I could help. Thanks for watching

Glad I was able to help! Sad that this is still an issue after so many years!

Thank you! This video was many years ago when drones just became a thing. My brother is a drone pilot now, so next video!

Glad it worked. Thanks for watching

Make sure to switch the adapter over to Wii U mode, not PC mode.

Thank you! I'm glad you like MiniFlex! 😁

Sounds like a beast!

If you're going to fund the idea, I'm in!

A lot of the laptop's will work with a different fan profile. Try out the HP Pavillion DV6

No! Strictly the Sabertooth Z77

None of the fans in the video have leaked oil. They've also been daily driven since this video. My guess was it was a batch of the fans that got too much lubricant for the bear