Video

thanks for going through every step slowly and clearly! great contribution to LS 430 DIY community

I dont know how well you know your way around the inside of these but I have the same unit..the problem is mine charges when off but only runs on battery when turned on. I've tried using the skills I have to troubleshoot the board but I don't have the right equipment to diagnose the issue. But it won't detect the that it's plugged in when on. If you know how to fix any hell would be appreciated

Does anyone know where to get bushings for this pump

All you need to do is take the timer valve apart and use water proof grease to clean and grease the parts. The cogs and pins stick. Technically no timer, it works on water pressure on the cogs.

I just changed the cabin air filter in my f54 so thank you for the video although I had to watch another one with better lighting to figure out where the “secret door” was. Thank you mini for making such a simple and routine maintenance task so difficult and complex. Thank you again

None of the seats or the panels have to come out. A few harmless cuts to widen the the back deck to get the speaker out is all that is needed. When the cover goes back on, you can never tell because the material that is removed is much smaller than the cover. It still looks stock. There is no reason to make this any more complicated than it should be.

The hardest speakers is panel positions.

Bet that is my issue as well! Thanks Will!

would be great if you can show the door for the inside filter. its not really visible

You would have had better bass with a dual 2 ohm 8" sub. The dual 2 ohm is better than dual 4 ohm because it produces more movement in the sub giving you more bass using the stock amp. The stock amp is set to match the stock radio volume but using a lower ohm sub which is more sensitive will play louder.

Do you have noize?

Isn't that a speaker? I remember the element table but maybe car speakers have been added since I graduated

Gotta charge em all!!!

Great video! Door PANEL

2:29 *farts*

Thanks 😄

2024! Still very informative! Thanks!!

You helped me tremendously! I take care of my husband. I have to do household repairs on my own. I thought I had to get a new chlorinator. Floaters use too many tablets. I ordered the part and thanks to you saved the cost of a new chlorinator. Thank you so much!

I have the 1500va, however I do not have any batteries and when I turn it on there's a constant beep and the Display panel does not turn on. Do you know if this might be because there are no batteries connected? I looked inside and I cannot see any obvious damage in any component or PCB

I came to this video to see how you prime it before you start the full process

Same unit exact same failure mode on battery pack and chassis power plug. I used jb weld. Frustrating to have to fix which is really poor apc component quality. Enjoyed video.

Very poor lighting. It would have been a lot better if the backdrop had been a gray or some other neutral color so the camera wouldn't have closed down the lens to compensate for the bright white working surface. Also, the video should definitely have explained HOW to discharge the capacitors, since they are so dangerous.

atp im just gonna cut a bigger space for a bigger sub lmao.

What brand speaker and woofer?

Just wanted to drop a note and say thank you. I was having a lot of trouble getting this to work with my Insteon system and your tutorial worked brilliantly. Perfect workaround and solved for $16 out the door. Thank you!

General instructions work for a 2023 Countryman (F60) as well - thank you sir. Be patient your first time - it is there, but you have to be Mr Fantastic to contort yourself and see the hatch for the filters. You always hear about German engineering, and this doesn't match up. Not a good design for a part you can expect to replace every couple of years.

Hi, im confused which one should i buy Satechi 200w or ugreen 200w charger? Please advise me

Sir you just saved me so much aggravation. All the other guys had a completely different access panel. Thank you.

Great video! I'm just getting started unboxing this behemoth and was wondering about your mattress choice. My directions say mattress "must stand in vertical position without sagging." Does your memory foam comply after a few years? Thanks.

Superb video. This is coming from a commercial pool tech who trains new guys.

Are these the same as the ML speaker?

I noticed this is not marketed as a free air subwoofer like the oem one? Does it still perform well despite this?

Thanks for the video - in the UK it’s still on the rhs but you also have the steering wheel to content with 😂

look nice.

Love the disassemble brother,your video help us alot.Thank you for your precious time.

This is a great video! The reason why the OEM speakers don't last is because they're light in the ass and made out of paper like material.

Thanks Will! I have the same chlorinator with the exact same problem. Your video told me how to diagnose the problem, how to fix it and how to test it afterwards. All in an eight minute video.

Does the M6-1.0 denote that the bolt is 6mm wide and there is 1 thread per mm?

Thank you for the video.. I have the 2004 ls430 with rear massaging seats that also recline back and for electrically and center console with electric powered curtain shade on back window which raises and lowers.. it appears their are covers for two rear speaker each side but honestly I'm quite intimidated to even try after watching your vid lol

Will, I love you. I have been looking for this info for a few months now. This was spot on for my 2019 JCW Clubman. YOU ARE THE MAN!

Thanks for the video. I just put a set of these in the front doors of my 2001 LS430. They sound pretty good so far. I had the same problem it looks like you had with the speaker not fitting flush in the mount. There are some little plastic ridges in the mount that bind on the cage of the speaker. They were easy to shave off with a razor so the speaker fit flush. I didnt bother reusing the foam ring.

Attention right hand driver .... 😂 The cabin filter is at your driver side right hand . I made a mistake watching all the left hand driver side guide... And open the wrong panel and went crazy when I couldn't find it

can i use 4 ohm replacement speakers for the front doors?

You’re not kidding about the “crazy yoga positions”!!😂🤣thanks👍😁👍

Good afternoon I just purchased a 05 UL 430 my speakers are blown could you please provide the sub and door speakers ?

I hate that I can’t just take the mesh off and address it immediately.

Hi Will I know this is an old video,but I have just followed the same solution that you had,however after mounting the adapter and ball valve the flow of oil is less due to the small hole from adapter.Have you seen same issue?What will be you recommendation?btw did not grind the adapter it did fit well without obstruction 39G HF Compressor

so many damn steps for an obviously vulnerable part of the car. they knew what they were doing

THANK YOU! wow, that job was not pleasant. After the cabin exchange, I found a paper that came with new filters. It claimed the repair was moderate in difficulty and should take between 4-6 minutes. Doing this for the first time was very difficult. I would love to see someone do this in under 10 minutes, it took me at least 20, I never want to do it again but I know when the time comes I probably will : )

Making use of the czcams.com/users/postUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type