Video

You best luck is eBay, if it’s not there you gonna have to get it from AliExpress…

Hi! If it’s a used card, I recommend you to do a proper maintenance, I bought even new strix 3080 and it had thermal pads oem leaking oil! If yours is a used one and most likely V1 , I’d bet it was used for mining and ran 24/7 with fans at max speeds. Mine is not loud even at max, that’s smt really cool about the strix fan system. Mine doesn’t run hot at all!!!

@@MAIKUS07 it’s actually a V2! My GPU temp is around 70-80 C when running Fortnite at all epic settings specifically. However, I only have 1 fan at the back of my case which could be why it’s running hotter too. I just don’t know what to do, I could still return it. Unless this performance is normal? The fans are spinning between 2000RPM-2700RPM when it’s at 70-80 Celcius. Which is when the fans get audible

@@sapients2664​​⁠​⁠from the start, if you don’t have a proper cooling system on your case, then the whole system is wrong from the get go, you need a balance between intake and exhaust, it’s very inexpensive and quite often a a solution that can bring down temp by 5-10 Celsius in many cases. Second download hinfo64 and check what you have on junction temperature when playing at max settings, if it’s lower than 90 you are ok , if it’s 100 or more I’d worry and change thermal pads, keep in mind if you gotten a good deal, and you have the knowledge and security to do what I did in the video, then you have a good card, you maintenance is sometimes forgotten but a must at some point in life of the Gpu and a 3080 strix it’s an amazing card (3090 is a big leap and more lifetime, but it is what it is 😅) . Last download Mai afterburner and set card as default and then put fans at 80% that should be an acceptable db of the fans noise(up to you really, I rather have my card tuning as cold as possible, I use headset when playing anyways), you could also leave it at auto… but no matter what, arrange the systems fan properly!! Good luck!

If it’s a dog strix 3070ti then yes sir! Good luck

Let me know how it goes!

Hi! Indeed you can!!

@@MAIKUS07thank you very much sir .strix series looks all same but had doubts.thanks again god bless you❤

No worries mate! 🙌Btw 3070,3080, 3090 and all TI versions are good for this tutorial! Amazing gpus, Good luck!!

@@MAIKUS07for sure sir its #1 in my list .but these days i am getting problems with it while dual mining iron+Pyrin or gram this 3070 ti strix dropping to NA while mining gram (memory temp issue may be).i tried almost everything but no luck sir is there any temporary solution my card is only 1.5 years old

Thankyou, it means a lot !! Check this link, you'll see all the measurements, but depends on where you have high temps, Id only worry about the vrams, just use 2mm on all the vrams and same place for vrams but on the backplate (like the video) that will make a Huge change, if you open the gpu and the other pads are usable (not broken or full of grease) then don't mind on changing them, this is obviously considering a budget. If money its not an issue then by all means go ahead. But bear in mind, the big change youll see it by replacing the thermal paste, pads on Vrams and adding pads on the backplate, good luck !! thermalpad.eu/thermal-pad-sizes/asus-rog-strix-nvidia-geforce-rtx-3090/

@@MAIKUS07Thanks for your time.

eBay!

Hi! The RGB itself is very easy to change but it forces you to disassemble the GPU as well unfortunately. The rgb has one or two tiny screws and then you need to slide the plate on its free side to be able to take it out!! Good Luck

Thanks I will try 🤙🏻

Hi!!! This is where I bought it from, it comes with logo and I fear to say it’s the exact same Chinese factory fan , good luck!!! www.ebay.com/itm/304259129763?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vy_yv6bxswk&sssrc=4429486&ssuid=-nTIr3M5Qje&var=603347182993&widget_ver=artemis&media=COPY

😊🙌 Exactly, it’s the same procedure for STRIX 3070,3080,3090 and I dare to say that TI versions too!! Glad I could help!!🎉

​@MAIKUS07 I have some asus rog strix 3070ti oc gpus that I need to open up . I will like to use copper for the memory and put a pad on the cpu like that I don't have to touch them no more. Just clean the dust.

I open my asus rog strix 6:58 3070ti oc everything is running smoothly.

@@1967KIDpad on the cpu ? In gpu what you meant

@@ssshatam the pads and paste and clean it 97 alcohol.

Hi!!! I use Hinfo64, the ones I bought that look precisely oem are from eBay, check the comment I have left the link somewhere there. Looks like your gpu is having a dry thermal pads on, you may also see that there might be grease there (clean it with isopropyl alcohol like I did or with a pad if you don’t feel coragueous enough 😅). Of course that wobble doesn’t help at all, good luck!🙌

Glad you liked it! 💪🏻🙌

If you check the video, I specify the size with text on a corner or it shows right there!

Hi! Absolutely not, it’s a different gpu! Generally speaking you can take the ideas, but if you need specific details then you should look for the specific card you have, good luck!!

Hi!! I also knew that but I saw a very detailed analysis from jayztwocents regarding that and final conclusion was, pretty much not a big difference, I shall try fully covering it, when I get a small shovel to spread accordingly on my next Gpu 🙌

That’s exactly the issue, in order to be able to replace the fans you do have to go through the whole process of disassembly, I’ve seen some people accomplishing what you want but not without scratching very seriously the circuit board (entering with a screwdriver from the sides) it’s better to take time and perform a thorough maintenance, I promise if you follow exactly the video it’s as easy as it looks!! Good luck on your 3070 🙌

@@MAIKUS07 Just a pain since there isn't any reliable info online about thermal pad sizes for the Strix 3070. Not really wanting to reuse the stock pads. But thank you for the info!

@@MAIKUS07Just got the new fan installed. Ended up just re-using the thermal pads since they looked brand new. Thermal paste was hard and dried out, so I'm glad I actually needed to take it completely apart. Replaced it with MX-6 and the temps have dropped significantly! Thank you again for the video and the info!

@@Nate0514 I’m so glad it was helpful!!! 💪🏻🙌 enjoy your refreshed card!!

Hi I know right!!! I don’t understand how come asus is cheaping out on them, glad I was able to help 🙌

I tested the same conditions before and after that was the result!!

On eBay, I don’t have the link anymore, I do have extra fans I bought if interested

I have created the link, this is one I had extra if you need it! www.ebay.com/itm/204406988576?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=-nTIr3M5Qje&sssrc=2051273&ssuid=-nTIr3M5Qje&var=&widget_ver=artemis&media=COPY

@@MAIKUS07 Thanks for the offer. I noticed, that my gpu is the loudest part when gaming and based on others, their pc is whispering silent (which mine also is when the gpu isnt spinning) idk, how loud really normal is but i would have liked to try it out with some new fans. Because currently, my apple watch is saying that its arround 55 db loud when play the last of us for example (ik, the watch isnt an accurate device for that)

Thankyou for your comments!! If your fan is wobbling and is under warranty you can send it to asus and they will send you another unit, even if they say that they will replace the fan , they won’t. It happened to me once, up to you if you wanna have another unit (still most likely used once but approved from them) if you are happy with yours but temps are fine, then sadly when you open it you must put thermal paste and try to be extremely carefull and patient so the thermal pads won’t break when separating the GPU, but thermal paste for sure you must!!

@@MAIKUS07 thank you. the fan is not wobbling, just running fast even when I just play a YT video. Started a while ago, I saw some people with the same issue and it was the outlet on the fan side which was not fully plugged. So I have to open it to check that (guarantee is passed). will be my first time applying thermal paste :)

Hi! I never used a 3060ti, but it should be similar if it’s the same brand and model, thermal pads thickness could be diferent though! Good luck

Thanks for the comment 🙌. You should, you GPU will appreciate !

Yeah, the gpu draws 360w and it's only at 60c.

Hi! It’s called Hwinfo64, when it opens click just sensors only, good luck!

@@MAIKUS07 thanks man appreciate it

Thankyou for taking the time to comment and your comment obviously. It means I really helped someone around the globe 🙌💪🏻 Enjoy your card!!!

Hi! How hot are we talking about! What’s the junction temp? And GPU temp?

Hey i also have the strix 3080 ti even when undervolted at 1875mhz with 850mV the card still runs at 70-78C when pulling 320-350W

@@paulferdinand4655 are you 100% positive it’s taking the 850mV? It cannot run that hot on that voltage, asumming you’ve done proper maintenance then consider sending it to ASUS to RMA it 🤞 :/

Which Noctua fans? Do you have a link to see them?

How would you attach Noctua fans to this in the first place? I am planning to do this with two NF-A12 but I can only see four screws in total on the gpu.

Haha Thankyou!!! And it took me forever to find something acceptable to put on, you know copyright compliance…

Hi! I have found that operation is exactly as oem, no DB increments at all, if you have found the same then go for it!!!

@@MAIKUS07 Sweet, thank you for answering so fast! ❤

Hi! I’m in vacations right now, away from all the parts. But will definitely have it in my mind for next video, these led bars tend to dimm over time. It’s very simple to change though, it has 1 or 2 tiny screws and then it slides right off from the side!!

@@MAIKUS07 thank you. I’m looking for your upcoming video.

Hi!! Thankyou for your comments!! In regard to the thermal pads that’s exactly what I did, being careful to not damage the other ones since they use diferent sizes. But there is no need to replace those, just do thermal pads on both sides for Vrams, put exactly the size, take your time to measure it and replace thermal paste as well and you are done!!! Let me know the improvement in temps. You got 🙏🏻

@@MAIKUS07 Thanks for the fast reply. Ok i will try it like that. It will definetly improve my temps because one of the fans is damaged but i will compare it and then let you know.

@@jonashorschlager anytime! If it is wobbling, then replace it asap, somewhere in the comments here I put the link to the one I Bought from eBay. That one as you can see in the video looks exactly the same and comes with the logo, others don’t… good luck!!

@@jonashorschlager anytime! If it is wobbling, then replace it asap, somewhere in the comments here I put the link to the one I Bought from eBay. That one as you can see in the video looks exactly the same and comes with the logo, others don’t… good luck!!

Yeah unfortunately i am from europe so the fan you used is from america so i bought one from amazon and i think it will work as well :) (also with a logo)

Hi!! I have done this in so many strix 3080, I lost count. Trust me, all you need to replace is the thermal pads (and paste for core) and put on the backplate as well to achieve the same result shown on the video!!! 2mm is perfect, at the description you have the links to buy exactly the one you need. You could change the other ones that are smaller but there is no need, just be careful not to break them when you take the pieces apart, do it slowly and if it breaks put it back, those don’t change the overall result!

Here: www.ebay.com/itm/304259129763?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vy_yv6bxswk&sssrc=2349624&ssuid=-nTIr3M5Qje&var=&widget_ver=artemis&media=COPY

@@MAIKUS07 amazing thanks!

@@mylesheaven hope it helps!! 💪🏻

I have seen a video showing that is doable, but it’s super tight and you need to have specific screwdrivers and even then will you most likely scratch the gpu housing

Hello!! To my knowledge, asus does not void warranty by doing it. Also, in the United States, by law you are allowed to perform maintenance without voiding the warranty, good luck!!

@@MAIKUS07 I see, thank you :) . Your video is a good reference for cleaning and maintenance.

Hi! I’ve never had the chance to deal with A 3070 to be honest. Since they are practically the same except for the power connectors, it’s should be at least for the GPU core, not sure about the transistors though, you could try check on Reddit if there is a post about 3070 strix layout

Hello! I cannot say for sure. For 3080 and 3090 yes. 3070 has not diferent build, at least for the vrams I would dare to say they are, but if when opening the GPU , other thermal pads brake, those most likely are diferent mm.

I appreciate that!! Thankyou

@@MAIKUS07 May I ask where did you get the replacement fans from?

@@MAIKUS07 I just followed your guide and was able to change out the fans and repaste the card. I didn't change the thermal pads though. Anyway just wanted to say thanks again as this made it so easy to do.

@@MSJChem I’m very happy to read that :). Thankyou so much for your feedback!!!

@Eim4 gameplay Hi! I found them on Ebay, check the comments I put the link to another viewer that was looking for them, good luck!

Hi!!! They are both top of the line models from their respective companies. I remember getting one suprim x and it wouldn’t hold its MH, I got more than 12 Rog strix and they all worked since day one… that was my experience only, hope it helps!!

@@MAIKUS07 l will buy one of tham same price thats why asking

@@WiecznieNieNasycony they are both excellent. But I prefer asus brand on that regard, whichever you choose you will be great!!! 🙌

Sorry, didn’t add the ❔

Hi!!! Im glad you enjoyed it!!! 🙌 I was also looking for the logo and basically you have to check on the pictures, they are tricky some of them they show the logo some don’t. www.ebay.com/itm/304259129763?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vy_yv6bxswk&sssrc=2349624&ssuid=-nTIr3M5Qje&var=603347182992&widget_ver=artemis&media=COPY That is the listing on eBay where I got it and as you can see on the video the motor is exactly the same replacement (probably from the same factory even 😊)

Thank you so much! I was only going to replace the fans and I now decided to replace the thermal pads too while I’m at it lol

@@allanyordi totally! Since you are opening it and perhaps you find yourself with thermal pads leaking oil then you have to change it or you open it to change the fans and the thermal might break resulting in poor contact when reassembling it. Better to do it only once 😁 and you end up with a strix for many years to come!!

You’re right! I’m now looking up the thermal pads to order them. It says 2mm in the video, but you also mention 1.5mm in the description bro. What size and how much would you say I should order?

Thank you! Cheers!

Thankyou bro!! 🙌