- 154
- 301 352
S. C.
Registrace 24. 12. 2008
Saf-T-guard knife glove RIGHT hand conversion.
just simply showing how easy it is to reverse the dexterity of the safety glove.
I thought it was funny when somebody listed a RIGHT handed glove.
I thought it was funny when somebody listed a RIGHT handed glove.
zhlédnutí: 171
Video
Lil Chick Manual press , tortilla , TXM 15cp
zhlédnutí 27Před měsícem
simply just a tortilla or meat press. I mean whatever you want to press and I'm not sure the full capacity or how hard you can press it but this is heavy duty. the weight is 68 lb and most of that is the plates. let me know if you have any questions I can probably take pictures or do a short video in addition
Julian Mountain Drive CLEAN
zhlédnutí 62Před 4 měsíci
About twice a year i take this drive. This time i gave my car to a friend and asked him to record it. This is what i got back. ZOOOM ahead and see what you want. There are a few parts that drag but fun. Who wants to fund a Pikes Peak drive , off season.
A.R.E. XLT triple stack
zhlédnutí 41Před 4 měsíci
We had previously installed a double but business was so good they needed a third. Call us for southern Ca install Alex Restaurant Equipment
Special jacks one man 3 door frig move
zhlédnutí 142Před 6 měsíci
with the special Jax it is possible for one guy to move a three-door refrigerator even if Wheels need to be installed or lower to within a half an inch to get it in the door.
Studio fire , total loss , glassdeskproductions
zhlédnutí 167Před 8 měsíci
Studio fire , total loss , glassdeskproductions
Long Beach hallway.
zhlédnutí 39Před 9 měsíci
FSE inc. all equipment available but needs to be removed through the double door pass through trulsen
Hobart M802 un-pallet delivery method
zhlédnutí 1,1KPřed 11 měsíci
here's just one of the many ways to take a huge mixer off of a truck with a lift gate . with just one man and minor help. I ended up activating the motor with a drill. making sure to move the lever in the proper position to make the ball go up and down using a kart to lift the mixer enough to get a pipe underneath. a few tense moments but pretty easy. the video is at 300% so it took about 30 mi...
Lincoln Impringer Conveyor Oven 1000 Natural gas analog
zhlédnutí 183Před 2 lety
as of 10/12/21 this oven is for sale. working perfect as you can see from the video. has all its parts . ready to install in your new place. We can ship or install locally here in southren CA call ALEX 562-688-3155
XLT oven lift kit , one man
zhlédnutí 1,8KPřed 3 lety
Give me a lever and a place to stand..... it CAN be done safely one man if you buy the kit
Star round floor safe ODD open
zhlédnutí 8KPřed 3 lety
Didnt have the combo but i figured it out.... May be that may who have the combination self discovered may be the same sequence.
AmSec style safe S&G group 2 combination discover
zhlédnutí 2,2KPřed 3 lety
just a quick rundown of what to look for when discovering combination. I previously in a video cut this safe bottom off. You can also do the side.
CSS ( Amsec DSF2014C Front Loading Drop Safe) crack / cut open
zhlédnutí 1,3KPřed 3 lety
CSS ( Amsec DSF2014C Front Loading Drop Safe) crack / cut open
direct connect LED (one side power) conversion from florescent bulb
zhlédnutí 113Před 3 lety
direct connect LED (one side power) conversion from florescent bulb
LED direct connect (two end) conversion from florescent fixture
zhlédnutí 29Před 3 lety
LED direct connect (two end) conversion from florescent fixture
Tag Heuer Tiger Woods cut in half with a gold ring
zhlédnutí 190Před 3 lety
Tag Heuer Tiger Woods cut in half with a gold ring
Middleby Marshall ES360WB move rebuild
zhlédnutí 1,5KPřed 4 lety
Middleby Marshall ES360WB move rebuild
Dang I was hoping to see it press some meat. Looking for a schnitzel press.
1:16 1:17 1:18 1:19 1:20 1:20 1:20 1:21 1:21 1:21 1:22 1:22 1:22 1:22 1:22 1:23 1:23 1:23 1:24 1:24 1:24 1:24 1:25 1:26 1:26 1:27 1:27 1:27 1:28 1:28 1:28 1:29 1:29 1:30 1:30 1:30 1:30 1:31 1:31 1:31 1:32 1:32 1:32 1:33 1:33 1:33 1:34 1:34 1:35 1:36 1:36 1:36 😊😊 1:37 1:37 1:38 1:38 1:38 1:39 😊 1:39
Great job ❤
I have a star machine floor safe with the top off and trying to get the combo discovered and working. Following your video I feel like I’m close but missing something. I’ve taken off the horseshoe, turned right and left until the spaces line up, reinstalled the horseshoe, the with the lid still upside turned to the right to drop the spring, reinstalled the back plate, dialed the combo, but when I turn left and push, I’m not getting drop like yours did. I am thinking my combo is one or two numbers off. Any hints would be amazing.
With the back cover off you realize you have to push a lever in order for this to properly work? I would have to re-watch my video but I'm pretty sure that I indicated that. Sometimes I remove that lever when I'm discovering the combination
Is it plausible that the first # would be 0 Father in law’s safe (he passed in March)have what we think is combination. It is ACME but looks just like the one in video. His written sequence is L(3)#-R(2X)#-L(1)#-R# I did attempt your sequence…
A lot of people have their own ways of writing down the combination. Starting at 0 is possible to be the first number. Without telling me the number are there three or four? Also I have been told that it is able to open with the sequence backwards. Txt me? 619 821 0371
Clean version. Just a fun drive. Yes we had fun in the middle .
Is there a guide button
Hello, can i ask a few questions? im in the work of removing top unit to place a conventional oven on top of the bottom conveyor... i cant find any other videos regarding this particular oven.. do you know how heavy is the top unit (motor part only) and do you know if the both ovens work together? i really only use the bottom and i could use the top space for my conventional oven. thank you much and really looking to hear any ideas very soon.
They work independently. It can be done. Just... Seldom if ever see anybody do that. Possible and not too heavy for the unit .
wooooow the fastes answer aver gotten! thank you much @@coulssp
done!!! it worked out very good, thanks for the feed back @@coulssp
I need to know how to get it back on to the pallet
Do you have a bowl dolly... Or attach a bowl and use the electric lift mechanism to inch it up. Then once it is high enough do the Egyptian and roll it onto the pallet. That's what's good about these flat bottom mixers, you can roll them
Are you saying that I don't need to know the actual code for the safe or is your code the code from the video? I have one of these, but we don't have the combo
Only if it is open like mine was. You can discover the code and with a special key from eBay or take it to a locksmith you can choose your own code
Only if it is open like mine was. You can discover the code and with a special key from eBay or take it to a locksmith you can choose your own code
Is it just me that found it odd that he turned right/CW to the last number (55) and continued to turn right until the (fence) "drop" when reassembling the lock. Also during the final test, turning right to the last number but this time pushing in and turning left until you can push in further to turn right to retract the bolt is also just a kludge. I'm pretty sure he's dialing the lock in the wrong direction, based on this kludgy mess and other CZcams videos (from dean safe for example) that explain how to open these round amsec/star floor safes. You start by turning left/CCW for the first number and because of this the combination is going to be a few numbers off.
For being self-taught and exploring the combination and discovering it on my own... And being severely dyslexic but highly mechanically inclined .... I figured it out. And I showed people the inner workings. And it works. ( I've been ed-u-ma-cated by watching other videos afterwords). There is more than one way to skin a cat. How do YOU find it easiest.
Hello do you happen to have another one of these?
No longer have any
Can a locksmith get into it if we lost the combination, or should I drill it out and buy a new lid?
It'll probably be 3 or $400 for the locksmith to discover the code. If ... if... It's not rusted. Drilling it out is a pain. These things are beasts, but if you can do it a good used one goes for about $200. I don't have any more
@@coulssp thank you for the information. It’s actually our elementary school safe and hasn’t been opened in years. We are in a rural area so I hope I can find a locksmith to come to us. 🙏
That was truly painful to watch. How many mixers have you tipped over doing it that way?
None. I've been delivering and installing mixers for about 16 yr. There's a thousand ways to do things. My way works. How do you do it?
@@coulssp I don't want my way plastered all over You tube. I feel big reason why I can buy V-1401s and M-802s as cheap as I do is that people have no clue on how to move them.
I'm sure you'll understand the joke. How very Egyptian of you. I deliver install flawlessly , so far.
How did it catch fire in the first place?
A model was smoking on the patio and caught it on fire. Currently only wood studs left in the unit. Working on rebuild
@@coulssp that sucks dude, hope you got insurance to cover it.
Actually my brother screwed up and did not have renter's insurance. Everything else is handled but all contents inside considered complete loss. Insurance will cover structure
Hi , What the drill point for this safe ?
No clue. I have never attacked the safe from the front
I really like the custom case you have for it
poorly explained
It's ok, it's incorrect info anyway...dean safe has a better video on how to dial open one of these round floor safes.
How can u open it up if is seal with out adial
Where do you buy that moving kit?
XLT Ovens sells this kit.
Anyway to manipulate it? We have one at school and noone has opened it in 20 plus years. No one knows the combination.
How can open a safe like this if combination is forgotten?
I got this safe but mine is a key round or something how can I get a replacement key to use?
I bought a property already has a floor safe , I don’t have the safe combination to open, a letter G is on top I guess it’s the brand , how can I open this safe ? I need to use it Anyone can help?
Without completely destroying it.... You would have to call a locksmith and maybe he can use a decoding device. There is no easy way inside.
Hello, good video, so your are saying the gary floor safe doesn't open until 20 numerals past actual combo? I might sound stupid but i'm new at this. does it snap in at 20 past?
Yes I'm saying that it does SNAP in at 20 past or so. It will be a definite drop and catch. (After talking to a few people I understand that the combination could be put in two different ways either starting left or starting right) just a mechanical anomaly.
@@coulssp Wow thanks for the quick response. I guess if i start right than that all other directions are opposite also?
@@panningbuddy2301 yes. It's going to be very obvious when it finally drops and catches . I say drop because that's what happens inside but you will feel it.
@@coulssp No luck, it seems like it only catches the tumblers on certain numbers. its very easy to turn. I did spray a little lubricant around the dial, could it be that I'm just cleaning the numbers correctly?
@@coulsspWe just moved in last year and had no idea what the combo was, my wife found it by accident while painting the closet shelf. the prior owner i know had two small box like safes in the same closet. Either they didn't know that the floor safe existed or they tried and couldn't get it open. We believe the house had the original carpet in it since it was built in 69.
wait you pushed the tumblers in but did you turn it again? the camera went away
How was that a rebuild? Dropping a screw driver in a piece of pipe where im from means clumsy not rebuild.
So I just bought one of these from my next door neighbor but the model number is 27. How do I find out more information about it. I can't find anything online for that model. Thanks in advance
Hobart will have the instruction manual online. With complete part breakdown. Just make sure to use the "mil" # also the serial number when researching. Because along the assembly line they changed things and it will be slightly different.
Violet
I need to remake this video
you fix these mixers? where is you location shop?
Jjdg
Hi I have a Crow River wheelchair lift that folds out but wont go down and something keeps killing my van battery. Could it be from the lift? Any ideas on what might be wrong with it? or where I can get parts for it? Weren't Crow River wheelchair lifts made by BraunAbility? Max 750 Lbs. Model 7684 DL Serial #D8902112 Manufacturing date 2/24/89. The van is a 1989 Chevy G20. what are the micro switches and where are they located on the lift? Thanks.
What bracket has to be removed to replace lower belt?
Does it grind coffee fine for espresso?
If you are still looking I just came across a hopper for this. The metal coffee bean holder.
Any tips on a floor safe: Gary Safe CO City of Industry serial number 77308
I bought a house with one of these installed in the slab. Before I bought the house someone took a hammer to the safe and broke off the dial. Do you have any suggestions on how to get into it?
Drill out the 3 bolts that throw out. As I understand it takes about 20,000 pounds pressure to pull it straight out. It has a couple types of relockers inside so a delicate drill does not really work that well.
Bought a Star floor safe at an auction without the combination. I have pulled off the cap and have successfully lined everything up to get the bolts to retract but when I put the cover back on and try what I think is the combination it does'nt work as I hope. Very frustrating. I see videos which say left 4x to 1st number and your video goes right to 1st number. More confusion. Low serial number so combination not available from AMSEC. Assistance required.
I have a star floor safe bought it with no combination though it is open the dual is stuck. What can I do to fix it ? Thank you
If it was mine I would soak it in WD-40 upside down. Is the dial stuck on or does it not spin at all? Since a child I've disassembled everything that I own. So taking something apart like that would be fun
Well the dial goes into the holes but it won’t spin. I would take it apart but I don’t want to mess it up and also I don’t have the combination
@@jpena8899 by opening it up from the bottom you can discover the combination and clean up and lube up everything. If you can see the back of the safe head then you are in good shape
@@coulssp Thank you I will give it a shot
I got the dial to unstick but now I need to find out the combo
How much are they worth
I used to sell them all day for 100 bucks. On ebay, but that was about 5 years ago. I would put them in a flatrate box. Easy
@@coulssp its prob about 25pounds and is old and in perfect shape I was thinking 300
@@dwrldgster3151 the cool thing about the medium flat rate box is, it can be up to 75 lb and only cost about $15 to ship. And it fits perfect in the box just put foam around it ( if not it will break through the box) I have one I have to sell here soon too
I have a gary safe co in floor. Safe i bought at a garage sale in vancouver washington how do i get the combination it was locked when i got and would love to use it any ideas thank you
Did you just buy the safe head? You can flip it over and disassemble it to figure out the combination. There are videos how to do that and I think I have a couple of here also.
I forgot the code on mine
I don't know any easy solution other than drilling it out and destroying the head
I just bought a house with two star floor safes I have spent about 4 hours drilling one hole in each safe so I could drop a pen camera down into safe one safe is empty the other has a bag and looks like a pistol I have the serial number to the safe is there anyway to find out combination based on the serial number local locksmith s say to hard to open and won’t come out
I would suggest keep on drilling holes until
You actually drill through the throw out bolts. They are about 3/8 in each.
@@coulssp going to get more bits
We bought a house and found one of these type of saves hidden inside the bathroom vanity. The dial has been broken off. The previous owner said they tried to open it with no luck and that the original owner husband when in his. 50’s and that she had never been able to open the safe either supposedly. So how would be able to get this safe open by drilling? Any help any one could supply would be greatly appreciated. We live in a small rural town in Iowa so no big safe company’s around.
We bought a house and found one of these type of saves hidden inside the bathroom vanity. The dial has been broken off. The previous owner said they tried to open it with no luck and that the original owner husband when in his. 50’s and that she had never been able to open the safe either supposedly. So how would be able to get this safe open by drilling? Any help any one could supply would be greatly appreciated. We live in a small rural town in Iowa so no big safe company’s around.
As I remember it takes 25 or 30,000 lb of pressure to pull that head off. Only suggestion is a destructive method of drilling at the points where the tumblers push out. It would bug me to no end to not know what's inside even if nothing
Is it typical for major safe to have 4 numbers as a combination? I noticed you used 4 numbers and the safe I have has only 3 numbers but I also cannot get it open so I am wondering if I am missing a number and if that is the problem or not
I typically articulate through the fourth number. It is about 95 where the tumblers all drop and catch. It is for sequences but not for numbers. After the final number I usually just go back to 95 or wherever it drops. You'll feel a catch and it will open
Hi which oil do you use?
Honestly don't know. Sold this years ago
These are awesome. Did you stop making knives?
sort of my forever project. most of them are bought but... I want to make the two bladed R.A.D. knife
Is there a master code is can use? Like a reset code, if I forgot combo
Didn't work, at all. At all!
If your tumblers are rusted or corroded.... They're not going to pick up like they need to
Thanks for prompt response. Any chance there's a master code, or some such, that will get it open (so I don't have to call locksmith)
@@saraessex8124 no master code that I know of. A standard locksmith factory set is 0 50 0 But that is doubtful
do you still make them?