Video

The exact same happended to my starter. Renault Master 2, 2006, 2,5 dCi, 190.000km. Changed it last week, works like a charm now.

WHAT YEAR VEHICLE? WHAT YEAR VEHICLE? WHAT YEAR VEHICLE? WHAT YEAR VEHICLE?

Forgive my ignorance, but I can't actually tell what the issues are, are you able to explain any more? Thanks mate.

I have a peugeot 306 1.6 96 Hatch do i have to drop the suspension sub frame down to get the box out, getting conficting opinions hear some people say i have to and some say i dont. can you give me advice on this. Cheers

Got clio 2011 clutch pedal clicking was told its the pedal box does the dash have to come out thanks

Hello I had a "DME" fault code in my OBD reader, I would like to know where this DME relay is located in a BMW E87 116i. Thank you very much!

few glitter sparkles in the oil and you "give it back to customer" ..... bodge and leggit more like....

how exactly do you program this model nozzles on this car please help me I work with forscan program

Iv got one that has started juddering in reverse nissan primestar 2.0 dci 115 any idea what it could be

Hi i replaced my starter motor but still just clicks once and nothing, thinking its the starter relay but cant find a repair manual for a 2003 movano,any idea which relay is the starter relay?

Jedziesz po złej stronie drogi.

I think Big Hands needs more Bevvy's to steady his hands

Excellent vid well informed thanks may have to do this on my vivaro 11 plate 2.0cdti we did the new clutch and slave 6 months ago and now the clutch just slightly crushed for first 10 miles cold. So thought ill try bleed the slave nip. How ever now clutch doesn't return and couldn't get fluid through the slave nip so will have to check the return spring and this clutch section dam vivaro it's been good so far thanks again have subscribed

Glow plug module... crap things keep going

If I was gonna do that, I’d of replaced the whole lot. Shock absorber, spring, top mount, dust covers. Good idea to do both sides too.

Any experience with faulty separator valve on these engines? Think mines knacked and don't know how to test

Thanks for showing us how to do this! I am wondering if some stretchy plastic wrap would allow the boot to slip over the raised section. Then push the boot past the plastic and remove the plastic?

Don't go to halfords, just don't.

Buenos días. Me puedes decir la referencia del Kit Valeo??? Muchas gracias.

Gotta do mine tomorrow, dreading it now. Work van iv ever owned i hate it. Everything breaks on it

Wow 😮 you don't have to do all that what you have done you have created more work and more expense for the customer. I'm so glad my father taught me from an early age to do my own repairs to my own and rest of families cars. I'm doing my own vw jetta tomorrow. And I always take pics of work I do on cars.

Well done, great job

Thank you, i just changed my starter onmy 2008 master using the method from your video and it was t half as hard as i was expecting.. im back on tje road and chuffed to bits.. top man.

Great video and very well explained, but at the end you mentioned about having to have the correct software for reprograming the actuators if you change the hydraulic fluid. The software and hardware needed is lexia 3 and Diagbox and it also has to be used after fitting a new clutch for realignment of the clutch and bitting point, Did you do that as not mentioned at all in the video ?? otherwise this video is very well explaind keep up the good work. Thanks

These kinds of Halfords shenanigans are simply appalling.

I just rebuilt my valve with a kit from Amazon. Works great now. There are 4 connections on the valve. Inlet, out to left side, out to right side and on the very bottom the outlet going to the windscreen washer fluid reservoir.

Hello, thank you for your video. I am following you in France.. I have a question, was your problem that the vehicle was blowing cold air and hot air at the same time. Thanks in advance. Good luck

Used pressure tester, holds pressure but clutch still on floor, goes in gear easily when engine off, when clutch reverse bled holds for 4 days only

Getting pressure tester tomorrow of amazon, same as one you used

Hello. Be kind, tell me please. What to do in such a situation. On a Peugeot 3008, the robot changes gears normally at 1900 or 2100, but then after these numbers it makes 3000 revolutions and shifts the throttle. It’s as if there’s a lost connection somewhere. There are also foams at low speed from 5km to 10km. she sometimes twitches.

thanks for taking the time to make this video. I just hit some insane bumpy lane dividers and no I can't start my beloved 08 master

Please I desperately need help!

OMG these are geat vans if you think this is a hard job you need to change your job there very easy to work on believe me alot easy then other vans & cars I've just done one the other day very simple and quick to change if your doing right i can't believe how rough you are and not using the right tools just ragging the plastics and snapping the bolts just use some lube lol😅 you need to think about changing your trade I'm gob smacked 😮

They make good cars for mechanics, seems like a nice little earner being a BMW Indy. Never specialise in anything easy, you'll have a lot of competition...

Thank you 😁 gonna tackle mine tomorrow and this video helped a lot

I’ve got a c4 grand Picasso the actuator is getting empty and oil is dripping by the gearbox, would this be the slave cylinder? Does the actuator oil go threw to slave cylinder?

@ 13:03 was this the clutch interlock safety switch ? Thanks

Hi would it be possible to do this guide for a MK4 2.2 tdci (200bhp) KNBA engine. It's the facelift model that uses the Peugeot HDI engine. I've searched & searched but can't find any guides for it anywhere

Tu me sauvé la vie là 😊

Great vans, covered 136K miles and only 1 problem, yes the radiator! I replaced mine and not such a great problem if one knows what is required! Loved the video by the way! Remember, opinions are not facts!

Awesome video thanks

Can I use windshield wiper relay (green one) until I got this black one, is it the same, would I mess something up?

when removing pully bolt do you put car in gear with brake on or nuetral no brake ?

❤

Hi there great vid! So you don't need to drain the coolant first?

Brilliant video. I did exactly the same job yesterday. I’d watched several other videos tackling the same topic, but sadly missed your one, which is by far the most instructive. Keep up the great work.

good job

Can you come and do mine please😮

Very nice detailed video Thankyou 👍🏼 I have same engine, same oil cooler and same oil leak issue but i’ve found oil residue in coolant water. Did you find oil in coolant or vice versa?

Hi do you do mobile work? i need my starter replacing in kidderminster