Video

Quick update on the overland rig interior and smart rv systems.

Quick update on the progress of turning my FMTV into an overland RV rig.

In this video, join me on an extraordinary adventure as I take to the skies in my very own turbine helicopter! 🚁✨. This is the last time I'll fly her before the new owner picks her up. I'll share the incredible experience of flying in a personal turbine helicopter, showcasing the power, agility, and breathtaking views that come with it. From takeoff to landing, you'll witness the beauty of our ...

Quick overview of my diesel heater install in the overland LMTV build.

I’ve been wanting to create a way to take my dual sport with me when I take the Overland rig on trips. I didn’t wanna hassle with ramps because of the height, and I also wanted to keep my approach angle reasonable. So I came up with this lift that holds the motorcycle by the frame, so your suspension is never compressed, and lifts it over, 30 inches up From the base. It gives me more clearance ...

Just a quick status update on the inside progress of the overland rv rig based on the lmtv chassis

Just a quick update on how the truck build is going! 

Current progress with 3 weeks to go! Part Thirty Six of the build progress of my custom overland expedition rig. It is based on the Stewart and Stevenson 1088 series 6x6 5 ton trucks that were designed for the military. I'm building a custom camper to go explore in. Enjoy the ride!

Fabricating the grey and black tanks onto the frame. Part Thirty Five of the build progress of my custom overland expedition rig. It is based on the Stewart and Stevenson 1088 series 6x6 5 ton trucks that were designed for the military. I'm building a custom camper to go explore in. Enjoy the ride!

Putting the box onto the frame, finally! Part Thirty Three of the build progress of my custom overland expedition rig. It is based on the Stewart and Stevenson 1088 series 6x6 5 ton trucks that were designed for the military. I'm building a custom camper to go explore in. Enjoy the ride!

I wanted to share a side project I've been working on for the overland build. I've been learning Home Assistant to run the RV, and automate some things. I wanted to see if I could take the cheap MaxxFan and make it reversible, have finer speed control, automate the temperature and humidity settings, and make it work both on the Home Assistant app, as well as by direct controls on the fan or the...

Just the last few little details before the box gets mounted! Part Thirty Three of the build progress of my custom overland expedition rig. It is based on the Stewart and Stevenson 1088 series 6x6 5 ton trucks that were designed for the military. I'm building a custom camper to go explore in. Enjoy the ride!

Part 32 in the build series. Started spraying the raptor liner on today. It went fairly well, although a quart at a time is tough as it takes a while. Part Thirty Two of the build progress of my custom overland expedition rig. It is based on the Stewart and Stevenson 1088 series 6x6 5 ton trucks that were designed for the military. I'm building a custom camper to go explore in. Enjoy the ride!

Spraying Raptor Liner on an Overland Rig - Pt 1

Pioneer Town To Big Bear - Off roading in the LMTV Overland Truck through the snow

FMTV/LMTV Auxiliary Transmission Cooler Delete

LMTV Overland Build - Update 30, Prepping the Exterior for Raptor Liner

Installing Overland Windows, Hole Cutting and Fitting in an LMTV - Update 29

Habitat Sheeting and Insulation - LMTV Update 28

8'X8' Liftgate on an FMTV Install. Adding a second patio, dance floor, car carrier, spare tire rack

Getting Prepped for a Testing Trip - LMTV Overland Expedition Truck Build - Part 25

Sound Proofing the Habitat Floor Part 2

Sound Proofing the Habitat Floor Part 1 - LMTV Overland Truck Build

LMTV Cab Clunk Repair - Overland Truck Build Part 24

Adding a pintle hitch and standard hitch receiver to an LMTV - Overland Truck Build Part 23

LMTV Overland DIY Build - Priming and Preparing the Frame for Insulation and Sound Control - Part 22

LMTV Overland Expedition Truck Build - Part Twenty One

Havasu Foiling with TC Freeride

LMTV Overland Expedition Truck Build - Part Twenty