Video

Thank you so much for watching and your comment. I'm glad you liked the video. Regarding the music: I find it very hard to do the voice overs in English. Some sentences are combined of 5 takes of one single sentence. Sometimes even more!!! I even need to cuts in single words and combine several takes of a single word. As a result the ambient noise is all over, and the cuts in the voice over track are VERY noticeable. Without music you'd go crazy. So I NEED music to mask all the cuts in the audio track. But in general I understand your comment: When focusing on the content, music is often distracting.

You bought 3? OMG, you too?! LOL! I've had far too many, now I only have 15 Singers in my possession. The class 15 is great, and a 15 with a potted motor is a great purchase. What other Singers have you bought? All the best from The Netherlands.

Can’t remember it’s in my storage I believe 66. Like new. I’m a pest control I go every house and I found that I ask if it’s for sale since she doesn’t need it I offer $25 I believe huh it’s a steal. And one is touch and sew. Like new all bells and whistles book I was doing a service it’s ready for donation I ask can I have it. And she gave it to me hahahahha. Lucky guy. Try ultra Sonic’s cleaning like doing jewelry it’s much better not harming the metal. Good luck bro. I’m Frank. From Philippines living here in Virginia USA. God bless bro

@@CZcamsrkit7 Hi Frank, the Singer 66 is nice too. I havent tried the Touch and Sew. There is a 1960s Singer Touch and Sew-ad on YT. Perhaps you'd like to watch that video too. If you're on the hunt for Singer machines: Try to find a good 201. You're going to love that machine. Or a 221 featheweight is nice too, but overpriced. I'm fond of the Singer 20 and 24. Good luck and take care

Can you help me find a model industrial zigzager. Yap. But why I focus on 15-91. Very good machine on leather bro. I’ll start collecting and sell it.

@@CZcamsrkit7 start with fb marketplace. Good luck

Thank you for you comment! I'm not familiat with ultra sonic but I'll look it up. Have a great weekend!

@@erikneek. It’s like removing everything on the metal and it turns new condition without polishing or scratching the metal. By the way just bought 3 sewing machines. Singer 15-91. Very good shape. I’m starting collecting like you.

@@CZcamsrkit7 Thank you so much for your reply!

You can check FB marktplace or a national buy/sell website. Or just visit a thrift store. Good luck!

Hi. Thank you for your message. Do you mean catching up the lower thread? I've shown that in other videos (like this about the 401: czcams.com/video/lbwyTqoDUjk/video.htmlsi=y0HEJbVPT1n-BiCk (starting at 4'40"), but I didnt show it on the Singer 328. Here we go: Close the panel of the lower bobbin with a couple of inches thread out of it. Then thread the upper part of the thread, all the way until the needle. Now, clamp down/push the thread of the upper thread and make a full rotation with the balance wheel. The needle will pick up the lower thread. And now you're good to go. I hope this was helpful to you. Good luck!

What would be a great idea for a future video! Thank you!

@@mrswroclai je ‘smeert’ het met naaimachine olie. GEEN wd40! Naaimachine olie van Kroon is te vinden bij de Gamma bij de fietsspullen. Volgens mij heb ik ook een video over het onderhouden en oliën van een Singer 401. Nog gefeliciteerd met uw aankoop. Veel plezier ermee!

@@erikneek Helemaal goed. Ik heb het in de oren geknoopt over de wd40 :-). De verwarring ontstond omdat er in het boekje zowel olie als smeervet worden genoemd. Is het verstandig om sowieso met olie in de weer te gaan en even schoon te maken? De verkoper zei dat hij 4 jaar terug een onderhoudsbeurt heeft gehad en dat ze er tot aan nu zo'n 2 - 3 keer gebruik van heeft gemaakt. Ik vond het voor mijn oog er wel netjes uitzien toen ik hem openmaakte, en alles loopt denk ik wel vrij soepel.

@@mrswroclai Het woord Onderhoud hoeft niet altijd even veel te betekenen. Eigenlijk moet je de naaimachine voor ieder groot project even van olie voorzien. Dat zijn maar een paar plekken en overal maar 1 of 2 druppels olie - snelle klus dus. Wat de verkoper wellicht vergeten is om te vertellen (ahum!) is dat olie na verloop van tijd verdwijnt. Dus 4 jaar geleden onderhouden betekent helaas niet zoveel. Iedere maand ff een druppeltje olie en je bent klaar. Er zijn een paar tandwielen die je van smetvel moet voorzien. De rest is allemaal naaimachine-olie. Volgens mij geeft deze video een redelijk idee wat het inhoudt: czcams.com/video/2hUNt6UbAr0/video.htmlsi=7cDnV805qCpdOYTA Succes, en vooral: veel plezier ermee!!!

No this machine does a lock stitch

Hallo Diede en Eline, Dankjulliewel voor de reactie en het kijken naar mijn video(s). Om eerlijk te zijn ben ik niet zo'n held als het gaat om het bijstellen van de timing van het interne mechanisme. Ik heb dat ooit gedaan bij mijn Singer 78-1 en ik heb daar ook een video van gemaakt. Hoe dat bij een 401 zit weet ik eerlijk gezegd niet. Zit u op FB? Er is een internationale FB-groep over de Singer 401. Wellicht dat iemand u aldaar verder kan helpen. Succes!

That is a nice steal. Especially for a mint machine. Congratulations! (By the way… I also made a video on the 401.) Take care

Hallo. Dankjewel voor de reactie en het kijken naar mijn video(s). Wat een interessant verhaal. Het is wederom een bewijs dat die oude Singers niet kapot te krijgen zijn. Het zal voor de huidige gebruikers wel bijzonder zijn om met dit stukje familiegeschiedenis te kunnen werken. Ondanks de verschrikkingen van de oorlog aldaar. Over de Singer. De eerste versie van de Singer 15, de Improved Family, werd rond 1879 geintroduceerd volgens mij. Herkenbaar aan de vioolvormige naaiplaat en het spanningselement op de kopse kant. (Zie video.) Een decenium later kwam de eigenlijke Singer klasse 15 met een rechthoekige naaiplaat, maar nog steeds dat spanningselement op de kopse kant. Dat spanningselement zit ALTIJD op de kopse kant bij de Singer 15. Het serienummer doet mij vermoeden dat ze geen Singer 15 hebben, maar een Singer 12 New Family. De eerste Singer 12 New Family stamt uit 1865 ofzo. Dus dan zou het serienummer wel kunnen kloppen. De Singer 12 heeft ook een vioolvormige naaiplaat, maar een totaal ander mechanisme, vergelijkbaar met de werking van de latere Singer 48 waarvan ik ook een video heb. Foto's zullen u ongetwijfeld verder helpen. Een gek idee: Zou u een video kunnen maken van een paar shots of foto's en mij de link sturen? Ik denk graag mee. Er zijn meerdere groepen op FB over oude Singer naaimachines. Uiteraard kunt u daar ook de vraag stellen (en foto's bijsluiten). Succes!!!

@@erikneek czcams.com/users/postUgkxluTFt_ur1I_rxmiVoxD9aAEZU7R4pyPX?si=wmVExKSE-2LoWDA1

Hallo Erik. Hierbij een aantal foto's. czcams.com/users/postUgkxluTFt_ur1I_rxmiVoxD9aAEZU7R4pyPX?si=wmVExKSE-2LoWDA1 Die 12 waar je het over hebt, is die er ook met rechthoekige basisplaat? Want om die reden dacht ik aan de 15...... De spoel is al de ronde, de smalle uitvoering. Een spoelopwinder ontbreekt (inmiddels?) dus ze schuift een spoeltje op een stokje, en drukt de rand daarvan dan tegen het vliegwiel. Werkt ook..... De naaiplaat is van een ander design dan de achterste (ronde) afdekplaat. Lijkt dus een samenstelling van onderdelen, waarbij ik vermoedt dat de ronde plaat origineel is.

​@@Quesjer1 Dank voor de foto's!!! Zonder twijfel: het is een model 15. U heeft ook (denk ik) goed gezien dat de plaat aan de kopse kant niet origineel is. Wellicht is deze plaat voorop zelfs een reproductie en niet eens origineel van Singer. Ik ben het ook met u eens dat de ronde afdekplaat achterop origineel bij deze machine hoort. Ik zie overige een Singer boss-mount achterop, dus het is niet een super-vroege Singer 15. Vermoedelijk heeft de machine bovenop 2 schroefgaten voor een spoelopwinder. Dus wellicht dat u een een afgeleefde machine op de kop wilt tikken om de spoelopwinder van die machine te verwijderen. Blijven we met de vraag zitten: Waar komt deze Singer vandaan en wanneer is deze gebouwd. Om eerlijk te zijn: ik heb werkelijk geen idee. Het is een intressante casus en een curieus object ;-) Ik zou u voorstellen om lid te worden van een Vintage Singer FB-groep en daar de vraag te stellen. Mogelijk dat ik iets over het hoofd zie. Met vriendelijke groeten, Erik

Ha, heb ik weer hoor....."interessant object" en curieus zelfs.... Wat is die boss-mount? En als dat betekent dat het een latere versie is.....dan klopt die datering niet in dit geval, want kun je 1873 als onmogelijk terzijde schuiven. Kan maar zo dat een of andere %&÷€@ vergeten is om de letters van zijn fabriek erbij te zetten😅...... Ik ga vragen of Vera toch nog binnen de familie meer info kan opduikelen. Wordt vervolgd. Heb je een voorstel voor een club-lidmaatschap? Ik ben helemaal nieuw in dit wereldje..... O ja....ik zit (bewust) niet op facebook......

Hi. I'm sorry to hear your 328k has a problem. You probably already did this: Is the needle position set to center? Have you set the other lever to a position other that 0 (zero)? Do you have a pattern disc in top of the machine? If so, please oil the inside of the machine too. Perhaps the old sewing machine oil has become sticky. Oil it again with sewing machine oil and let it set for a day. Then try again. If it doesn't help: Do it again and wait for another day. I'm sure you will get it working again. Good luck!!!

Hi. Thank you for your message. Have you tried replacing the thread for another thread? Does is also break with this other (new) thread?

Best thing to do is search for another machine, for parts. Good luck

Спасибо🙏​@@erikneek

I find it difficult to understand your question. Do you mean the bobbin winder is being driven by the large balance wheel on the rear?

@@erikneek The wheel that spins at the back, right side of the machine, it has a center knob. This is turned, while the wheel is held in place. This disengages the needle mechanism from going up and down so you can wind the bobbin. However, for some reason or another, mine worked, well, started working. 🤷 The smaller center knob in the larger wheel was just spinning. It was tight but it was spinning. I decided to turn it forward, away from me that is, and it went a quarter turn and locked itself into place. So then I held the wheel again and turned toward me and it went a quarter turn or so and stopped. The needle mechanism was not moving and it was behaving properly. Not sure what happened or why but it's doing as it should now. Thanks for the reply though. I appreciate just the same.

@@bciecko1 Hi Bradford. Thank you so much for your description of the issue you're facing. As a non-English speaker (and reader) I hope I understand your problem, but I could have misunderstood it!!! Could it be that the washer inside the knob was not placed correctly? If so, that's a very easy task. Unscrew the little screw in that knob (but do not remove that screw). Now you can remove that knob by turning it counterclockwise until it is completely loose. There is a washer between that knob and the main shaft. Turn it around (mirror image) and put the knob back on that main shaft again. And tighten the little screw back again. Now try to retighten the knob. Does it work like it should? If this doesnt help, try to capture it on video (with your phone) and post a question in a Singer 201-group on Facebook. Video DOES help people to understand the issue (including me ;-)). Good luck!!!

Congratulations on your 201. Such amazing machine. You’re gonna love it! Good luck and enjoy your 201

You can find the manual by searching on Google or other search engines. But you can also download them at some facebook groups. Join the Singer Swing Needle Machines group. Then, if you are a member, go to the files section and download the manual you need. Good luck!!!

Hi, you might want to replace the bobbin case holder in order to use standard needles. Those adjusted cases makes it possible to use standard needles.

А где купить?

@@user-sn4vb5ff8q One of the members of the Singer Swing Needle Machines group (on facebook) sells them. Good luck

Hi, thank you so much for watching. Most EXTERNAL motors can be replaced with a new motor, like an YDK-motor (on ebay or other sites). Unfortunately the 401 has an internal motor. That makes replacing much more difficult!

Я про внутренний двигатель... На нём написано что они изготавливаются во Франции

@@user-sn4vb5ff8q I know it has an internal motor. And as I have stated in my previous reply: That will be difficult to replace. If you're attached to your machine you might want to search for another to use that second machine for parts.

Hi! Thank you for your comment. So lovely to hear from you. That serial number belongs to a model 15 built around 1947 in the Kilbowie plant in Clydebank Scotland. Take care and have a wonderful day

Hi! What do you mean, the plugins I use for titles? Or something else?

My videos need music because I sometimes use up to 10 parts of different takes of ONE single sentence. (That is one of the drawbacks of not being a native English spekaer). So the background noise is all over and the music masks those voice-over edits. But you're right: In this case -this video- the music was WAAYYYY TOO loud. (I have a hearing disability so mixing and balancing sound to very difficult. But I made a revised version with... less prominent music. I hope you like that version better. Take care and have a wonderful day!

Good point! Thank you, I will show that in future videos! Thanks again and have a great weekend

Vielen dank Andreas!

Absolutely Rachel. It takes some time but it can most likely be fixed. Use plenty of sewing machine oil and let it sit for a day or two. Check if it moves. If not: repeat what you’ve done. I have a separate video on how to get a frozen machine running again. czcams.com/video/qAK4bjN7dgQ/video.htmlsi=j4KoVE1t916gWMl8 And a second video with another tip/hint. Good luck!

Hi Eric thank you so much for your comment. I had plans to film just that, as that is the way I film the machines on my channel = the basics stuff of every machine I can get my hands on. Unfortunately I was not able to film the basics with this machine due to health issues. I hope I can make the tutorial in the near future. I have written the script, so now I just have to film and edit it…

Thank you for rescuing your 99k. Singer had two standard sizes for domestic sewing machines. The full sized and the 3/4 sized machines. The Singer 99 is a 3/4 sized machine and is basically a Singer 66, yet smaller and lighter. Like the Singer 66 it is nearly unbreakable. The 66 and 99 both use the class 66 bobbins and NOT the standard class 15 bobbins. (The class 66 bobbins are still available.) It uses the standard 15x1 needle, also known as the 2020. The letter k after the model number means it was built in the Kilbowie factory in Clydebank Scotland. There is a FB group dedicated to the Singer 99 & Singer 66. You might want to join that group? Good luck and take care! Erik

Hi. I have a separate video on changing the bulb for a led bulb (and also a video on which color bulb would be best). The type bulb you need is often ba15 bayonet. But be aware: there are slight differences between different bulbs - some may fit and others don’t fit. Good luck!

NICE find! You must be very happy with that machine. Enjoy!!!

@@erikneek the pressor foot only goes so high if it went high up this would be dope can you alter the walking foot to walk more

@@rndea100 you can change the stitch length width of you machine and therefore also the walking foot steps. Does this answer your question? There is a fb group on vintage industrial sewing machines with many (!) knowledgeable enthousiasts. You can post your questions there too Good luck!

@@erikneek no i think i need different feet seems to have a pipeing chord foot on i need a standerd one will the singer 132k feet fit

Thank you so much Nigel! You made my day!

Hi. Well first I would say: What is your definition of an uncommon Singer? The 201 is an old machine, yet common, and has a great stitch. The 221 is very much sought after, less common (but 7 million made worldwide) and has a great stitch too. The 78-1 I have is rare and has a marvelous stitch. Frankly I haven't seen a Singer with a terrible stitch. But that is my opinion. Have a great weekend

Glad to hear you liked the video. Good luck with your Singer 15!

Hi. I really want to help you, but unfortunately I don't understand the issue and your question. Can you rephrase it? By the way: There is a Singer 401-group on FB. Maybe you want to join that group and post your question there (with photo a/o video). Good luck!

Hi Michael. I also made an English spoken version. Perhaps you like that one better 😉 Take care

Hi, thank you so much for your message! Such a lovely story. Thank you for sharing! I have multiple videos about the Singer 319 including a video on servicing and maintaining a Singer 319. Here is a link: czcams.com/video/GzNp_y-1ElI/video.htmlsi=U4kOGPV0_OT_YTyh A few months ago I received a Singer 20-10 Sewhandy with a lot of rust. I tried to remove the surface rust with aluminum foil, and later with sanding paper. Here is a link to that video: czcams.com/video/Uxt1-wBaoSM/video.htmlsi=cRfU-TXPyxQbjh1f When you use sanding paper use caution. Dont rub it too much, be gentle with your machine and attachments! You have the risk to damage the plating. Good luck!!!

Hi Naomi. The AF serial numbers were built in the factory in Elisabethport New Jersey. Can you please check the serial number provided? There shouldn’t be a - in the serial number. The value is determined by many factors such as location, accessories and even how much an individual wants that specific machine. I can tell you what I would pay for it (if you have that serial number) but that what I would pay in The Netherlands. I don’t know it that would help you… Good luck

​@@erikneekAfternoon Erik. Thank you for responding to my previous message. I made a mistake by adding the - to the number. The serial number is AF 387387. All the assesories are there and the machine is in ammaculate condition. No paint chips or scratches. The only damage is the handle of the case has a bit of damage. Could you please tell me the value more or less and if it is a sought after machine for current buyers. Thank you very much. I love your videos. I was never interested in sewing machines but the more I watch your videos the more interested I am becomming.❤❤

​@@naomivantonder1161 Hi Naomi, so lovely to read your comment. Your machine could be a 1939 Singer model 221, also known a the Singer Featherweight. (Does it look like the machine in this video? czcams.com/video/pvWZ3WTb4Ts/video.htmlsi=nMUmXCN5P1KD-O-r) The Singer 221 Featherweight is a very popular machine and is very much sought after. However it is not a rare machine. Around 7 million 221's have been built since 1933/1934, in 3 factories (USA, Canada and Scotland). There is also a second Featherweight model: The Singer 222k Featherweight is slightly different and was produced only in Scotland and is worth more. I bought a 221k for over 110 euros which is a steal to be honest. In my area a good one goes for 300 up to 450 euros depending on the condition. In some territories they go for more. I'm planning to do a video on my 221 sewing machine, but that will take me months to complete. There area few groups @FB about the Singer Featherweight sewing machines. If you want to read more, I would suggest to visit the Singer Featherweight Shop for info and supplies. (There is also a book written about the Singer 221 Featherweight by the way.) I hope this info was sufficient. Take care and have a wonderful day.

Thank you so much for your comment. I have oiled the machine but the quality is not near the quality of an older Singer class 15. Have a great weekend and again: thank you for your comment.