- 16
- 49 571
Compensation
Registrace 2. 07. 2012
Make a motor puller for fans and blowers
This is a quick down and dirty about making a tool that took less than 15 minutes to make. If you only have spare parts or a hardware store to choose from then this is the ticket (plus it saves you $$$). Everything should be self explanatory and don't worry about precision because the center bolt will have some play. It hasn't slipped on me yet.
zhlédnutí: 360
Video
Repairing a Bacharach Informant 2 sensor head
zhlédnutí 465Před 3 lety
I bought this used and the "perfect condition" leak detector was busted. So to make use of my loss I fixed it and found out the flammable gas sensor was bad but the refrigerant sensor was still good. That's okay but I didn't want it for refrigerant leaks because these have been known for weak performance compared to others.
Blower pulley needed replaced
zhlédnutí 15Před 3 lety
This unit has been serviced by another company for years. After a few months their belts were trashed. So I'm throwing this out there for the new techs that might overlook this problem in hopes that it will help them become better and more observant.
Will a Pierce dump kit work over 4000#?
zhlédnutí 24KPřed 3 lety
When I was searching this kit I noticed there wasn't any videos with heavy loads. Well I peaked it over 5,000# just for you. If you want to know more about my truck or kit experiences then leave a comment and I can try my best to help. 95' f-250 460 5-speed Pierce DK2UKPD Kit
Changing hose gaskets on refrigerant gauges
zhlédnutí 19KPřed 4 lety
Changing out some gaskets on a titan manifold that hasn't been replaced before. Old and brittle usually comes out in two pieces. A good reason to change them often.
A few lights to talk about
zhlédnutí 55Před 4 lety
Auto craft battery powered drop light. Braun slim bar harbor freight. Honeywell bluetooth light bar. Auto craft drop light shop.advanceautoparts.com/p/autocraft-led-portable-work-light-21-led-12v-ac877/99994166-p?product_channel=local&store=6655&adtype=pla&product_channel=local&store_code=6655&ds_rl=1269692&ds_rl=1269725&ds_rl=1274511&gclid=CjwKCAjw3c_tBRA4EiwAICs8ChHW1Tz6lte6nFdk1QsKY7-OAfUhcu...
Gasket puller for door window tinting make your own
zhlédnutí 437Před 6 lety
Easy to make gasket puller. Slide into the window seal, hook bungee cords from holes to bottom of the door. Now you can slide the tint right in.
8750 4000 2500 watt harbor freight predator generators
zhlédnutí 1,8KPřed 7 lety
Just a quick comparison between the 3. If you own one then it will help get an idea of how loud a few of the other sizes are. Just taken with my cell phone. Sound meter from smart tools in the Google play store is the app I used. If you want to see something else to do with these just ask and I will see what I can do.
Fall time burn
zhlédnutí 8Před 8 lety
Safest way I know to burn with gas. Next time, Harry Potter references!
Blue creeper on door
zhlédnutí 25Před 9 lety
Using blue creeper lightly. Not drops but just touching the tip inverted instead. Pretty quick considering the pins were not pulled and the condition of them.
Mid completion solar kiln vid. Oct. 2012
zhlédnutí 2,7KPřed 11 lety
Was deleting videos off my phone and this was a good one to see it before I painted it black and dark brown
Playing with the d4d
zhlédnutí 181Před 11 lety
Lighting struck poplar was blocking my path. Nothing special, just wanted to share the old cat.
This looks awesome! Im not a ford guy but like all vehicles. Super cool truck! Are you in vermont? Mass? Looks like where I’m from
@TopNotchPropertyServiceLLC Indiana. I'd say any brand of the older trucks would haul like this with minor modifications as in springs, overloads, and air bags. Some of these newer frames are not the simple heavy duty kinds like they use to be.
@@tthack84 oh ok cool, thought you were up in New England, could have fooled me! Im thinking about putting one of these on my 2011 Tundra to make leaf cleanups and brush jobs way easier. Nothing too heavy maybe a bit of mulch.
Nylog is goopy
If you bought a used gauge set. Covered in oil, inside out, Would you clean it out? with isopropyl? Or acetone?
Thanks
Thanks man haven’t been able to use my hoses to pull a vacuum need to repair them asap
ug....the music....
awesome, easy to make for something , I might use once or twice in my lifetime
I have one on my 12 f250. Not the fault of Pierce, but I literally folded my bed in half with 3500 lb of engineered fill. I think the newer the truck the thinner the bed frame....I'm going to make an aluminum dump bed...
One of those 99 cent hook picks work well to get both the gasket and depressor out
I see two types of gaskets for sale. One type is 1/4" and the other is 3/8". The part you were repairing in the video was a 1/4" gasket, so what part of the manifold does the 3/8" ones go to? I noticed that you put the gasket in with the tapered side facing outward, correct? Mine was so disintegrated I couldn't tell which side goes in where.
So how do you install the ones on the manifold side?
Same way but doesn't have the depresser.
@@tthack84 I can't get the new gasket to go down in there. It's not like the other end that you can move the part that connects out of the way to give you full access.
Dealing with the same problem. On the one end the nut doesnt retract and it leaves the brass shell deep inside. Its impossible to get the new gasket inside without destroying it. Im going to have to make a tool at work just for installing these dumb things.
Noice
Does it have grease fittings at the pivot points?
You'd be better off just ordering a load of 15+ tons at one time. $150 delivery fee + material cost. Save time and fuel.
Two of the guys at work have the inficon d tec 3, ive used it once, im not so excited about it, not that i can back that up with anything… i was looking more toward the fieldpiece dp82, but bacarach meters were pretty decent in the gas industry, build wise, is the bacarach not really reliable, we end up in 407c,452a, r32 and probably alot of 134a which you looked to struggle with…the specs on this are for pretty tiny leaks at 0.5 oz/per year, im undecided on heated diode vs uv sensor…
This was helpful but I did make one modification, rather than trying to pick out the old gasket with a sharp object small screw driver I grabbed a wood screw big enough to bite into the gasket, screwed it in (not to far) and was able to pull the old gasket out with pliers on the screw head. I now keep that screw with my replacement gaskets!
Thank you so much
Would installing one of these void my warranty?
Build a tailgate out of lumber and add a removable bottom 2x6 and it should spread a road nicely.
That kit looks very strong , I got a question did you done any welding on that build.
I don't think I welded anything. Reciprocating saw, drill, and hand tools was pretty much it.
Man, that looked great. I have a '97 F250HD and it would love this.
I see that 2011 on the suction hose man they are ancient
Paso a paso para hacer el sistema hidraulico
How’s it going?!! Great content. Have you ever considered using PromoSM to help grow your channel!?
I've had a f350 shorty dually dump ..when u dump without the dual wheels do you find it's not so stable when you dump a load of stone?
I wouldn't say the the srw vs drw would make a difference necessarily. But I would lean more towards the actual bed shifting too far to the side and failing before the truck would tilt too far with a single wheel axle. When this bed is lifted up, you can actually push it side to side about half a foot both ways on the cab side of the bed. That's one of my recommendations is to beef up the bed while it's off the truck. But back to your question I think load class E tires is a must for srw and does fine for me.
I love my Pierce Arrow dump bed. It works better than I could have ever hoped for. I built two wedges that fill the areas just infront of the wheel wells that product can be hung up on. They install by two clamps that hold onto the under side of the bed. When I don't need them I pul them out. Makes dumping so much easier. The thing I love the most about the dump bed conversion is your truck still looks like a standard pickup truck. But it gives you so much more versatility.
Nice job. Keep posting videos. Thanks for sharing
Have you had any problems with this kit long term, do you have any regrets when buying it? I'm looking at getting one possibly for a potential upgrade
If I had to buy it over again I would definitely do so. I might not buy the remote wireless for the $200 extra but the power up and power down option is a must for me personally. I am waiting until I build my new tailgate to record another video with all the issues and improvements I have. Should have one out this spring or summer explaining everything.
@@tthack84 well I look forward to it I'm getting very serious about getting a bigger truck and this is probably what I'm going to end up going with after the research I've done. I appreciate your feedback 👊
@@tthack84 where the update sir ? Or if you can just explain here with new updates or issues you’ve had with it
Thnx bro, gotta replace mine ASAP
So what you’re saying is definitely get the dump kit for my f350 ? Lol 😂
Cool thanks!
what engine does that bad boy have ?
460 😁
nice! I have a 1992 Ford f250 460 single cab and shes a beast, I was wondering was installation difficult? I want to add the dump to mine.
I done it solo with my tractor to lift the bed off and on. I would say a weekend would be sufficient. The most time consuming part was the instructions that was inaccurate and the back hinges needed the angle iron cut off in order to fit at all. I will make another video when I get a warm day about all the issues and things to avoid.
@@tthack84 sounds good buddy I'll be waiting for the video 💪
I’m not even going to finish watching this video, too slow!
Thank you for your feedback. I will try to make new ones quicker and to the point.
Thank you for putting video of these things actually being used
No problem. This is the one thing I've searched for that was not shown. Just a bunch of videos of people showing the install and not using it. Well I tried to abuse it so everyone can see its capabilities and function. Thank you for your comment.
So yea, I thought the editing was fine. I like the music over the top at the end. That's the stuff I'd like to do with mine. Not just music but it would make life SOOOO much easier if I could do voice overs when I'm done making the video lol.
Great job on the video!!
Thank you!
No problem getting the old ones out, but where do you get good ones that fit all the fittings?
Check out supplyhouse.com
I have a gasket on the end that stays on your manifold that is giving me fits. I cannot get all the junk out.
If it is just the little crumble pieces stuck on the hose end then you can use some refrigerant oil or nylog to help work it free while you scrape it with something plastic.
Since this video has half dislikes I would like to ask if there is anything you want to know about these. Otherwise I will probably just take it down if it's not helping anyone. Just offering to help since I have 3 and most people have just 1.
Can you make and sell me the set
Sweet ass room! How much were the theatre seats? And what size room is that? I am getting a house and want to do this so bad