I think I have the same sound, but when my engine is cold it sounds more like bad pulley or something like that, but I have new pulleys and new belts…and when engine is hot it sounds very similiar to your car on this video. Maybe it´s the washers on injector but I don ´t know how to recognise it.
Use vcds, you can read the injectors injection time correlations and injection quantities from 'engine' ->'measuring blocks'. 'Injection quantity deviation' should be bigger positive number on cylinders where the copper washers are leaking. You can also see black tar coming from the leak hole above exhaust manifold if the washer is leaking, there's one hole for every injector. I have changed new Bosch injectors and all washers and o-rings, done engine flush etc but still have that ticking sound on left side of the engine and a bit of exhaust fume smell in the engine bay. I'm starting to think it might be a cracked manifold or leaking exhaust manifold gasket.
@@ville85 thanx man. What is that leak hole? It´s something from factory to help the engine when the copper washers is broken? Sorry for my english. I saw a small drops of oil under the right head of engine. Do your sound goes off when you engine is warmed Up? My strange noise is going off when my engine is warmed Up.
@@miky9618 it seems youtube removed my previous answer because I had some websites linked. You can find info of this from different audi-forums. Those leak holes in the cylinder head are from factory and they are there so that the combustion chamber pressure will be blown out if the copper washers are leaking. The leaking tar is a mixture of carbon, oil and diesel, it's like the tar from new tarmac that sticks to your car. My ticking sound is as loud cold and warm. I'm just going to drive it until something breaks and then put newer engine 😁
@@ville85 thank you man for the answers. I got it now. I will go to car service for inpectation so i wish they repair it and I give you answer what was the problem on my car.
I have the same noise but what's confusing for me is that the noise only appears when the car is warm not on cold start, is it possible for the injector seal to cause the noise only when the engines warm and not cold?
Might be a cracked exhaust manifold or leaking manifold gasket. I have same ticking but the car runs well without issues. I have changed new Bosch injectors and all the seals and done lots of other maintenance.
@@TheOfficialVupeQ It was a combination out of both sounds, that was the reason I also changed the injectors. I paid about 2.5k€ and changed it for myself 😕
Thanks for the video. Just found out today that mine ir making the same noise, and after talking to people who deal with Audi’s they said the same - it’s the washers on the nozzles. Do update the video description. Gl with your Audi
@@TheOfficialVupeQ I bought it with that sound but it doesn´t really matter to me because it goes away once it reaches the normal temperature. It has now 160k km and it´s been knocking about 10k km
Mine has this, and also exhaust fumes leaking into cabin which suggests injector seals. If it doesnt have fumes then could be cam lifters and try wynns cam lift remedy
No, I would definitely NOT recommend leaving it like this. It will most certainly damage the injector after some time since the compression is no longer the same and it might cause additional damage to the engine itself. It's not an expensive fix, so it's better to do it. Also, do it on all cylinders at the same time. Last time I had 2 cylinders with this issue and after I fixed these two, about 6 months later I had the same issue on the other side. Now I've replaced all washers and O-rings and it purrs like a kitten.
You are not the first one with this problem. You don't have to look outside engine. Propably problem with hydraulic lifters on cam shaft. They are locked or leaking oil and not able to take the play away. That's the clicking. I have the same problem. It look like engine have to be take out because you need to lift cam shafts and to do that you need to loose timing chain on the back of the engine. But nothing is for sure. 😁 Try to buy some product for this lifters maybe it can help little bit....?
Turned out it was the copper washers and O-rings on the injectors. They wear out and start leaking fuel and oil. Two injectors on the left side had the same problem. The washers are sold in sets and can be bought from Audi directly at €5.50 per set. The labor costs were about a €100. The noise is gone now and it's running smooth again.
@@ahv1289 Hey I'm happy to hear that you solved the problem. Because some people have to take the engine out and it was still not solved. I'm going to audi for new rings and change them directly. Thanks for the feedback 👍
+AHM probabyl mostly because it didnt change much from start to finish. if you had like a custon camo skin or something, it would get more views, i think
Basic Gamer Tsk tsk, you gotta think from the internet's point of view: Are most of them a bunch of narrow minded children? Yes! Would they understand the purpose for putting a skin on that doesn't have any aesthetic appeal or change and that it is actually for prevention of fingerprints? Nope! then what should you do to gain more views and positive ratings? Use a more appealing decal next time. It's a sad age of the internet. they don't really understand the OTHER benefits of using a skin decal
+TheFpsGamer1125 Hi, I used to make these for a short period and the video's sole purpose was to inform people how to apply the vinyl. I didn't record voice because I was shooting the video with my DSLR and the mic on it sucks. As for the vinyl itself, I originally made 1 for myself because I really didn't
+AHM Sorry, accidentally sent the first message. So...as I was saying, I made the vinyl because I really didn't like how fingerprints were left all over my laptop. I posted the result on the ROG forum and people said they want as well. I made 10 more and I sold them last year and the video was a guide. :) I haven't made more after this because it's super expensive to make these in Germany and the price was very high. :)
That noise is the injector
Yes, it was the injector washers and o-rings. The copper washers were worn out.
Chain noise
Podkładka wtrysku -uszczelka.
Kupfer dichtring
I’ve got the same noise as well on my Audi A8 but the noise you can hear from the dashboard from inside actually😢
Hes sir, i have a same problem, can i drive car with that sound , is it safe?
I think I have the same sound, but when my engine is cold it sounds more like bad pulley or something like that, but I have new pulleys and new belts…and when engine is hot it sounds very similiar to your car on this video. Maybe it´s the washers on injector but I don ´t know how to recognise it.
Use vcds, you can read the injectors injection time correlations and injection quantities from 'engine' ->'measuring blocks'. 'Injection quantity deviation' should be bigger positive number on cylinders where the copper washers are leaking. You can also see black tar coming from the leak hole above exhaust manifold if the washer is leaking, there's one hole for every injector. I have changed new Bosch injectors and all washers and o-rings, done engine flush etc but still have that ticking sound on left side of the engine and a bit of exhaust fume smell in the engine bay. I'm starting to think it might be a cracked manifold or leaking exhaust manifold gasket.
@@ville85 thanx man. What is that leak hole? It´s something from factory to help the engine when the copper washers is broken? Sorry for my english. I saw a small drops of oil under the right head of engine. Do your sound goes off when you engine is warmed Up? My strange noise is going off when my engine is warmed Up.
@@miky9618 it seems youtube removed my previous answer because I had some websites linked. You can find info of this from different audi-forums. Those leak holes in the cylinder head are from factory and they are there so that the combustion chamber pressure will be blown out if the copper washers are leaking. The leaking tar is a mixture of carbon, oil and diesel, it's like the tar from new tarmac that sticks to your car. My ticking sound is as loud cold and warm. I'm just going to drive it until something breaks and then put newer engine 😁
@@ville85 thank you man for the answers. I got it now. I will go to car service for inpectation so i wish they repair it and I give you answer what was the problem on my car.
@@miky9618 Hope they will find and fix the issue. Tell us then what was wrong if they find it.
I have the same noise but what's confusing for me is that the noise only appears when the car is warm not on cold start, is it possible for the injector seal to cause the noise only when the engines warm and not cold?
I have the same issue
Might be a cracked exhaust manifold or leaking manifold gasket. I have same ticking but the car runs well without issues. I have changed new Bosch injectors and all the seals and done lots of other maintenance.
Fuel injectors copper washers need replacement .
Buenas que fue al final? Me pasa exactamente lo mismo y no saben en el taller lo que puede ser
leaking fuel injector, just like mine, got it fixed last week
i changed washers on fuel injeectos and still the same..
;:
What they change?
Injectors seals?
I suspect my q7 3.0 TDI also has this problem. Would it be safe to drive the car to the garage 1 mile away from where I live to get it checked?
Yes
And What was the problem? Have u solved?
@@TheOfficialVupeQ Timing Chain and injectors, changed both "sets" including everything else needed for this, and now it is working fine
So u dont know if that was injector sound or timing chain sound :/ . How much u paid for everything ?
@@TheOfficialVupeQ It was a combination out of both sounds, that was the reason I also changed the injectors. I paid about 2.5k€ and changed it for myself 😕
And by the way. If you want to know what noise bad timing chain makes, I got a video of that.
So heres on video thats not timing chain , right ?
@@TheOfficialVupeQ correct
Thanks for the video. Just found out today that mine ir making the same noise, and after talking to people who deal with Audi’s they said the same - it’s the washers on the nozzles. Do update the video description. Gl with your Audi
And now Ok? I changed washers and nothing happened
Hi Mareks l have sme problem my VW Phaeton please tell me how to fix and what l need part thank u
Hi to change washers and seals on injectors do need them coding after?
@@edgarandrejevskij568 no coding needed
@@TheOfficialVupeQSo what did you find out?
Did that sound was only on cold engine ? Or on warm also? I have the same sound but only when engine is cold
Same for me.
tl1000edu how long u drive with that? How many km u did and whats the Numbers on odomoter
@@TheOfficialVupeQ I bought it with that sound but it doesn´t really matter to me because it goes away once it reaches the normal temperature. It has now 160k km and it´s been knocking about 10k km
tl1000edu so u did 150 000 km on that? I changed dual mass and clutch for 1k € and still the same.. i think i will leave that
@@TheOfficialVupeQ no, i've been driving with that noise 10k km, but only for five minutes after cold start
Mine has this, and also exhaust fumes leaking into cabin which suggests injector seals. If it doesnt have fumes then could be cam lifters and try wynns cam lift remedy
And What was the reason?
@@TheOfficialVupeQ still no idea
@@jedigeekbiker but engine still working after 9 months?
@@TheOfficialVupeQ yeah just smells of fumes
It might be cracked exhaust manifold or leaking manifold gasket.
Will it still run fine and healthy if u dont feel like dealing with the tick noise
No, I would definitely NOT recommend leaving it like this. It will most certainly damage the injector after some time since the compression is no longer the same and it might cause additional damage to the engine itself. It's not an expensive fix, so it's better to do it. Also, do it on all cylinders at the same time. Last time I had 2 cylinders with this issue and after I fixed these two, about 6 months later I had the same issue on the other side. Now I've replaced all washers and O-rings and it purrs like a kitten.
AHM so u changed washers and o ring and now is Ok? I have the same sound and i thought that timing chain 🥴🥴
@@ahv1289 hey i have the same sound, but i changed washers and still ticking..
@@ahv1289 Hey i changed washers and o rings and still the same
just change the washers on the nozzles and it works perfectly
I did and still the same
What were problem?
What nozzles?
I have such a problem. The Škoda issue I have is a Škoda superb V6 150 hp
That's ABSOLUTELY NOT how to transfer the skin!
You are not the first one with this problem. You don't have to look outside engine. Propably problem with hydraulic lifters on cam shaft. They are locked or leaking oil and not able to take the play away. That's the clicking. I have the same problem. It look like engine have to be take out because you need to lift cam shafts and to do that you need to loose timing chain on the back of the engine. But nothing is for sure. 😁 Try to buy some product for this lifters maybe it can help little bit....?
Turned out it was the copper washers and O-rings on the injectors. They wear out and start leaking fuel and oil. Two injectors on the left side had the same problem. The washers are sold in sets and can be bought from Audi directly at €5.50 per set. The labor costs were about a €100. The noise is gone now and it's running smooth again.
@@ahv1289 Hey I'm happy to hear that you solved the problem. Because some people have to take the engine out and it was still not solved. I'm going to audi for new rings and change them directly. Thanks for the feedback 👍
@@ahv1289 Hey, do you have the part number for it?
@@JurikTomas Hi, yes you can find the number here. It's the parts labelled 29 and 30. audi.7zap.com/en/rdw/audi+a6+avant/a6/2011-648/1/130-130070/#30
Throw some Archoil 9100 oil additive in there and see what happens
where you get skin from?
На Ebay заказывал?
week
end
i need this also for ma g751jy :D
where did you get the skin? you got it online?
Video very good, I think will use it in my notebook , may I know where to buy this vinyl carbon ?
Please, tell me what you don't like in this video, so I can improve it?
+AHM probabyl mostly because it didnt change much from start to finish. if you had like a custon camo skin or something, it would get more views, i think
+TheFpsGamer1125 the idea is to stop fingerprints
Basic Gamer Tsk tsk, you gotta think from the internet's point of view: Are most of them a bunch of narrow minded children? Yes! Would they understand the purpose for putting a skin on that doesn't have any aesthetic appeal or change and that it is actually for prevention of fingerprints? Nope! then what should you do to gain more views and positive ratings? Use a more appealing decal next time. It's a sad age of the internet. they don't really understand the OTHER benefits of using a skin decal
+TheFpsGamer1125 Hi, I used to make these for a short period and the video's sole purpose was to inform people how to apply the vinyl. I didn't record voice because I was shooting the video with my DSLR and the mic on it sucks. As for the vinyl itself, I originally made 1 for myself because I really didn't
+AHM Sorry, accidentally sent the first message. So...as I was saying, I made the vinyl because I really didn't like how fingerprints were left all over my laptop. I posted the result on the ROG forum and people said they want as well. I made 10 more and I sold them last year and the video was a guide. :) I haven't made more after this because it's super expensive to make these in Germany and the price was very high. :)