![Doug Does Stuff!](/img/default-banner.jpg)
- 117
- 552 363
Doug Does Stuff!
United States
Registrace 16. 09. 2006
Doug Does Stuff is exactly what it says, Doug. Does stuff. I have more hobbies than a hobby store! You never know what the next video is about because anything and everything is game. I'm a real world dad/husband just making content that pleases me and hopefully helps others!
Ender 3 Pro vs Multiboard
Almost 2 minutes of printing condensed to 11 seconds. 2 days to go
zhlédnutí: 180
Video
Workshop: Multiboard prints
zhlédnutí 2KPřed 7 hodinami
Welcome to Doug Does Stuff. Today we look at the result of printing a stack of 4 Multiboard core tiles. It took 2 days 5 hours and 43 minutes to print these on my Ender 3 Pro. I am creating a Multiboard wall for my little workshop area. Chapters: 0:00 Start 2:34 Separating Multiboard Stack 4:55 Looking up close at Multiboard prints
Workshop: Day 1
zhlédnutí 586Před 9 hodinami
SORRY, the sound was very low for some reason. Today we start with Day 1 of redoing my little basement workshop. It had become over grown with stuff. It was a catch all and I had nowhere to put stuff, so I decided to take it all out and start over. I should had some forethought and taken a before and after picture, but I didn't. So, join along and see the outcome. This is a long video, so fast ...
Gelcoat Renew Day 5
zhlédnutí 113Před 14 hodinami
Welcome to Doug Does Stuff! I use a lot of Meguiar's Products, and say their name a lot, but I am not sponsored by or received their product for free On to day 5 of renewing the fiberglass on this old 1997 FourWinns 240 Horizon. I know I know, I say 1998 in the video, I'm not sure what was going on in my head, maybe that I just wanted to finish this boat already! Longer video, lots of talking a...
Attic Find: American Flyer set
zhlédnutí 26Před 19 hodinami
I found this on our local Facebook marketplace. It was a good deal. Things need to be cleaned and rewired, so I think it was a fair price for what is here and not knowing if it works.
Kohler Valve adjustment.... nope
zhlédnutí 257Před 28 dny
I was going to adjust the valves on my Kohler CV 23, but when I took off the cover I realized there is no adjustment for the valves...... or I'm just missing it.
Gelcoat Renew Day 4
zhlédnutí 18Před měsícem
Welcome to Doug Does Stuff! I use a lot of Meguiar's Products, and say their name a lot, but I am not sponsored by or received their product for free On to day 4 of renewing the fiberglass on this old 1997 FourWinns 240 Horizon. Shorter video this time as the day got away from me but again I ask lots of questions, try to detail what I am doing and hope that I can provide a little content at the...
Gelcoat Renew Day 3!!!!
zhlédnutí 471Před měsícem
Welcome to Doug Does Stuff! I use a lot of Meguiar's Products, and say their name a lot, but I am not sponsored by or received their product for free On to day 3 of renewing the fiberglass on this old 1997 FourWinns 240 Horizon. The video is long, and it is a lot of talking, but I take you through the journey along with me. I ask lots of questions, try to detail what I am doing and hope that I ...
Gelcoat Renew Day 2
zhlédnutí 429Před 2 měsíci
Welcome to Doug Does Stuff! More hobbies than one should have! Renewing the gelcoat on our 1997 Four Winns Horizon 240. It is heavily oxidized and needs some love. This is definitely a learning process and my ideas of what I am going to do change from minute to minute. I use a lot of Meguiar's Products, but not sponsored by Meguiar's. I purchased all the products in the video.
Gelcoat Renew Day 1
zhlédnutí 62Před 2 měsíci
Tackling the faded fiberglass, at least starting to. Day 1 of compound and tires arms. Not sponsored by Meguiars despite using all Meguiars products.
Decal Removal
zhlédnutí 53Před 2 měsíci
1997 Four Winns 240 Horizon Had big plans on the day, but just didn't get to it all. The decal removal took most of the day, but it's done.
JD 445 and Cyclone Rake XL connection
zhlédnutí 74Před 2 měsíci
I needed to connect a new to me Cyclone Rake XL to my John Deere 445. After seeing how much the company wanted for a bracket and new hose I decided to fabricate it myself. I changed direction a few times in my thinking over the course of the video, but I think the finished product worked out great. Hope this helps someone out there with the same problem.
474 from hell that just needs a can motor
zhlédnutí 33Před 3 měsíci
474 from hell that just needs a can motor
John Deere 445 Valve adjust, Compression test, Leak down test
zhlédnutí 1,9KPřed 3 měsíci
John Deere 445 Valve adjust, Compression test, Leak down test
2 days to print that is insane, I think my mostly stock sidewinder X2 could do that in 8 hours or so, I suggest you speed up the print head, get a 0.6mm nozzle which will let you set the layer height to 0.5mm which is awesome for churning out stuff like this
I'm new to the 3d printing realm. I'll have to dig in and see where I can speed it up. Thanks for the info
Beer, pretzels and 3D printing. I like your style!
This is so underrated
I think step one should be buy a bambu machine
Gloves.
Get yourself a printer with a removable spring steel build plate. You’ll wonder why you didn’t do it sooner, I promise you.
better yet just get a Magnetic print surface for this printer
Awesome! I am currently waiting on my first 3D printer to be delivered this weekend😊! I for sure could use these grids to organize some stuff!
Good luck and have fun! Which printer did you go with?
@@dougdoesstuff24 I got a Anycubuc 2 Kobe’s Neo. But with the Microsoft crash, it’s coming in later than normal.😢
What is multiboard = the 3D printed organization system based off of others that have already existed that tries to take advantage of packages that make it easier to understand the system to make money, that sums it up in the nutshell, ohh and uses the license two stranglehold makers on what they can and cannot recreate lol..........................
so you're a gridfinity guy ;)
@@dougdoesstuff24 nope honeycomb storage wall cuz its free and remixable and the creator didnt create it to take advantage of people to make a buck and claim its FREE
Damn, do you usually have the printer printing right next to you as you work on the computer?? Or did you move it there just for the video?
I have 4 printers in my office what's wrong with that
I just moved it there for now because of how long it was going to take. BUT, since I did the motherboard upgrade on it, it is VERY quiet. I could tolerate it if I had to. The original motherboard was so loud and could be heard from anywhere.
Hey, I'm trying to print the multiboard, but the first layer won't stick since it try to print first the the inside of the diamons, could you help me with your print configuration. I have the Ender 3 S1
Hey there. I am using just the standard quality print with a change to the walls to 3 as noted on multiboard. If your first layer isn't sticking then several things: 1. Bed level, Nozzle too far, Bed Temp, Nozzle Temp, clean bed. Lots to rule out.
My .2MM layer height 40% infill profile can print this in under 22 hours on a bone stock Ender 3 pro. I highly encourage you to look into tuning your slicer profile by hand as the default settings are FAR too conservative. Though my profile prints over twice as fast, the prints are able to retain the majority of the strength compared to default.
That's good to know. What is your print speed? No mods?
print speed 60mm/s. But just changing your print speed will not make you print much faster
I've printed a few "scrapers" in PLA to remove prints and I find that they do a decent job without scratching the print bed. Yeah they aren't as durable, but its a quick print and you can just print a new one when needed. Its been over a month since I printed my first 2 and I haven't had to print more. Something to keep in mind. Ive looked into printing this system, thanks for the share.
Get a A1 much better experience
I just print one at a time and all of them have nice PEI surface. Cool subsystem. I personally do love only the very first Ender 3. All other modifications have their downsides. Why Creality would not polish the very first model and call it Ender 3 DIY is a mystery for me. Prusa have printer KIT and as far as I know it have its popularity. And I already posted under the other video. The very first Ender 3 is very easy to maintain and upgrade, it really need some tuning, but after that it just prints. I am going to install POM Z nut so I will not need to grease it anymore. Needless to say in a two years I never greased it though = ) And it can print really fast, may be not so fast as a Bambu models, but 'cmon, its $100 printer which was created like 7 years ago or so. And Bambu printers are top notch and have quite a cost.
What? Twelve hours? Are you kidding? I have Ender 3, the very first one, which comes with bowden. I just installed BeMeGe (a printable BMG clone) and a simple direct extruder mod. Which is actually a very short bowden. It is 10cm length from gears to nozzle tip. Which is quite large for DD. Changed firmware. And 8x8 tile is printed under 4 hours(3:30 or something like that) and Bambu 'superduper' printer prints it in 2:30 as they say on multiboard site. Stock belts and motors have no trouble with 3000 mm/s2 accelerations and 150 mm/s speeds. I flatten the bed with hands, and what left I fill with sticky aluminum foil and checked with a metal ruler and a flashlight. So I do not use any probe to check bed level. I use bed tramming feature which recent Marlin firmware have, and a thin piece of paper, but I do this once in a couple of months, I usually do not change anything. And I use magnetic PEI, which is really convenient. And your bed is very slow in heating. I think this is because of that glass plate, and I bet you did not stick insulation from the bottom. My Ender 3 is ready to print in 2 minutes up to 255/70 which I use for PETG. (actually copied settings from Bambu slicer) I understand now, why people buy Bambu printers. What you showed int the video is a real pain. = ) And why do you print them in stack? I would understand if your printer would print one tile in 30 minutes. But for me, even one tile every 3-4 hour is not a big deal, and if I set it for a night it is only one tile yes, but not a big trouble. Also I would recommend add auto turn off mod too. It was actually the very first one which I installed. The printer can turn it self off by pressing a switch with printbed after the print. You are a really patient if you use this printer just like in the old days = )
Cool concept. Keep up thr work👌
Didnt realize how old this was till he said he got parts at radioshack... a barely remember those days lol
Can't believe that stick is still around and being used! 😁
Had the same problem but instead of taking apart the freezer I just disconnected the plug then opened the back plate in the back then cleared the tube it was all I needed to do it got done was way easier Thanks though for your video
Define leaky. What’s leaking? Air? Oil? Gas?
Air escaping through carb during leak down test
@@dougdoesstuff24 I'm a small engine tech. These kohlers have hydraulic lifters. You don't need to adjust the valves. That happens automatically. It sounds like you need to remove the head and lap the valves.
Adjust? You don't. Need head rebuild. Pull the head and re-seat the valve seats if needed with a peen-in, then re-lap the valves/grind the stems to fit again.
Looking at this rocker set up I noticed that there is a space between the rocker and the where the stud goes into the head , this might be like the old Chevy small blocks where the adjustment is in the rocker it self by tightening down the rocker stud nut till you have zero lash on the the push rod ,PS also known as a floating rocker design . Just google adjusting Chevy small block valves for reference .
Excellent video, thank you!
Nice. I have the 95 220 Horizon. What I did: Washed the boat, used a boat eraser to remove as much debris as possible, then hit the whole thing with Meguiars Compound on a rotary. After that, I went to Meguiars Polishing with a foam fine foam pad. Will be putting on ceramic coat for the final step. FYI: try using polishing compound on the rotary around 1500-2000 rpms rather than using that pad!
Great tip!
Thanks for the video. I’m in the same boat. Mine tested 120. Blowing lots of oil in the air filter.
Glad it can help. Definitely check those valve gaps and do a leakdown.
I think the white dots are imperfections in the gel coat, doesn’t mean you’ve burned through it. But I think more sanding/buffing will only make them more visible. Nice work, looks a lot better!
Lovew the sound of a stock flat twin purring along 👌
I have same problem with my 2024
Rings are probably shot
Thank you so much for sharing your custom hitch setup for your John Deere 445! We're amazed by the level of thought and work you've invested in creating it. While we do have a specific hitch option available for that John Deere model, we will absolutely be here to assist you in any way we can in the future. - The Cyclone Rake Team
Thank you and I appreciate that!
your foot was on the brake at 1st thats why the pto did not start . you could see the diff peddle down .. lol
Didn't even notice! Thank you for pointing it out
Hey Doug take off the steering cover off the center of the wheel of the steering wheel take that off and tieten the nut on the wheel and no more loosey goosey have a good day
I had done that, it wasn't the problem. It needed a total rebuild
That's fantastic my friend!!! 😃
What was the gasket part number
It looks like m45399 on the package, also on my quick Google search it seems to match @jimmysgarage4254
Is there a video of it actually blowing leaves?
No. Already moved on to another person too
Did you ever come up with a good fix for this ? Same issue with one I just bought for my grandfather
There are a few videos on what I did to correct steering. Lots of work
This actually works. Thank you!
Hello did you end up using a relay?
I did not on this one, but I did on a different vehicle
I like the way you use auto rams. What's the project where the dirt was dumped?
Took me researching the video to figure out you meant auto ramps, ha. We were filling raised beds with dirt for a garden
Awesome work. I'd like to do the exact same thing (minus the smoke stack- not at that level yet!). Do you have any diagram or high level explanation of how to wire it all up?
I don't, but I just wired it from the battery to a switch for lights and then to lights and viola
How much psi is that using?
I am pretty sure it is set to 90psi as it normally runs my tools.
It seems to me the diode should point to the battery, not the alternator. The purpose of the diode is to rectify the AC coming from the alternator and feed it into the battery as DC to charge it. From what you are saying, it sounds like you have it installed backwards.
Thank you so much for this video! My husband and I spent the day fixing our fridge instead of out looking at new ones!
Hey Doug, I've been watching your videos & reading all of your posts on the Simple Tractors forum. I have a Bad Hydraulic leak coming from where the Torque Generator, hoses & junction/regulator box are located under the dash. I have a service manual for mine, but was wondering how to tear apart the dash to get at everything under there to figure out where my leak is coming from ??? I haven't been able to find a video on how to tear it apart. Thanks Dave L.
I don't know if there was an easier way, but I had to take everything off from the seat plan to the tower and steering wheel. I just kept taking bolts off until I had it stripped
I have one and someone cut that for sure. I am sure you welded it but what a shame
Doug- How did you get the mower deck hanger bracket off the front of the front axle? (at 1:40) Aren't those fasteners nuts captured on the back of the axle & a cross frame member? I need to replace that bracket on my Prestige. Any comments would be greatly appreciated. Thanx for the vids. - Bob
OK, my Prestige has a much different front axle. Model no. 2690737.
Hey @Mr. Ograv Looks like you figured it out? I had an older prestige before they changed the axle design.
Old toilet...hate those 300 series.. you need 3 hands to operate!!
It was a love hate. I loved the down force of the plow. If I ever come across a 318 in my range, I'm going to convert to foot pedal. I really like the hydro levers on the 3 series, just something about them that feels better than the turn signal lever on my 355d
I want to know where you got the fan.
It was on there already
NICE
Did you ever get this going again?
Oh yeah, like a champ
Hello. How to get to this place where you have a screwed ignition?
Not sure I understand the question, sorry