Video

Thank you. It sure is. Check out my camping shower video to how I made it. It is all custom made apart from the hardkorr shower.

Thank you so much

Thank you. im glad you liked it, and I hope it helped

Yeah, so far, I do also, ben

Thank you. Yeah, that is what I'm thinking also.. bit of a feature.

Thank you. No problem, I will try to put a review video out soon.

@@ScottyzBuildz Thank you 💪

Yeah, I have thought about that, but it might close it in too much.

Yeah thats what I'm thinking too Frank.

Thank you Frank. So far the brackets are holding up great with no movement at all. I can stand on them with no flex. The I like the swing also for the price. Would love an update on your iload when you get it done.

Thank you so much. Sure thing, the headset I used was 44mm bike stem, but I bought 2 and used both the bottom bearing and bearing seat. The main outer body was 100 mm outside Dia. And around 94mm inner. The swing out body was 80mm box, and the headset sleeve was cut to suit the required length for a tight fit. The tube was 44mm inner but did have a slight wiggle room, so I advise to paint the inter tube for a more snug fit. I hope this helps, and if you need more info, just let me know 😊

Haha yeah sorry mate. That's exclusive content only VIP

Well, I already had a motor, i ordered the wrong VFD, so I got a new motor to match the VFD.

The whole point is that it swings away from the rooftop tent and allows the tent to open while having the shower tent alongside the tent. Also, it gets it away from the side of the camper. For my setup, it works great, and many people are even using them on their cars as it swings out from their canopy.

Haha yeah I did as soon as I noticed it. Was the correct way when you were here.

Yeah finally all running. Really good bandsaw

In what way do you think it stands out?

Hey, make yeah it can, but it could vary as my rack sits in closer to the inside of tub. But I will try to get you some measurements and see how u go.

They mate I made a custom rack for the solar panel to fit my tent shape then bolted it through the lid of the tent with some big washers so it won't pull through the lid of the tent.

@@ScottyzBuildz hey right. Did you use any silicone or something to avoid leaking?

@@ScottyzBuildz and also have you done any upgrades for the mattress? And can you store sleeping bags inside the shell?

I used a rubber pad and the seemed to work. It is around 4mm thick. If I didn't have the I would of used sikaflex

I put a swag mattress over the top but it is bulky to pack. I can't leave it in there, but u might be able to for a sleeping bag I have never tried.

Thank you. It's very messy, though, haha. I have cleaned it up since

Thanks mate :)

Thank you. I have thought about making more, but I need a new welder first to dial in my welds 😄

Thanks Timmy.. appreciate it 🙏

Thank you so much. I used a polyurethane / sikaflex. Really good and strong 💪 just need wax & grease remover to clean and smooth it over. As for the water tanks. I got mind from Supercheap Auto as they were on special. I'm pretty sure it was run out, and now they don't sell them.

@@ScottyzBuildz Thank you very much

Thank for the good information. I will definitely take your advice

Hey mate, thank you. Im not sure I haven't been asked that yet 🤔. What Awning do you have and do you have the same rack?

@@ScottyzBuildz I have the same rack and I’ve got the kings 270 awning 👍🏻

Depend how your rack is mounted also as mine is in closer as it is mounted on the roller rack and not the tub. Could make them but would need custom measuring and holes might have to be drilled to suit rack after in there correct positions.

Thank you. You probably can do without it, but it is good to isolate incase u leave it on and can drain the battery. If you don't use the battery for some time, u should isolate it. I will be adding another isolator that will turn off the complete trailer.

Thank you so much. It has been a game changer when set up.

I've just put a solid panel on my roof top a wk ago wish I had of seen Ur brilliant idea b4 Hand lol think u need to copyright haha

Oh nice! You can always upgrade it now like I did. Haha. Yeah that might be an Idea. Might make millions hahah

Thank you. Which part did you want me to measure? It might differ from other Ute's. The rack is very easily adjustable. Im happy to measure for you, but I can't guarantee it will work for your setup.

Thankyou so much. I appreciate it 🙏

Oh, really good to know Kim. I just got back from camping, and it seems the indication cooker kept tripping it. So I will be doing more tests myself.

Hey mate, what kind of fans are they? Are they wired correctly to your battery? Or shunt? Maybe test them on another battery first.

@@ScottyzBuildz hey mate, just the fans in the back of the inverter. Wanted to make sure they sucked air into the unit so when I mounted the inverter vertical with power points facing the sky the got air would want to travel upwards and our those cents near the power points and the fans would aid not fight that

@ethaniles5543 Oh, to be honest, I'm not sure which way the blow. I would think outwards as it would be removing hot air from the inverter. But you could be correct. It might suck them through the unit. I will have to check mine. I have my side fans, so the top one is blowing out as the hot air rises.

Hey mate, thank you so much for the feedback. I was wondering about the Negative wire as it does look way to small with what Kings supply. I will be sure to Upgrade it before I go away in 2 weeks. Did you Earth the battery and inverter to the chassis? Also do you think 70mm2 at the same length as supplied Kings wire would be sufficient?

I would not earth to the chassis. Just earth everything back to the battery.

Okay great thank you for the advice mate.

Hi Dev, I will all depend on how many AMPs you are drawing. Yoo will either need leave your car running or if it is only for short time the car will charge once driving but will take some time. Mine Alternator charges at around 30amps. Having a big enough Inverter that can hold constant draw for your needs. Mine can have continuous draw of 300amps and spike to 320amps for 5sec. But bear in mind you need big enough batter or batteries to last out the day for your grooming. You could run 2 x 300ah batteries in parallel that will give you 600ah in total. I would also suggest getting a Victron charger so you can charge it when at home or when out on site if needed plus add solar to the top of your trailer. My panel is 170watts and can pull in 9.5 amps in direct sunlight. I hope this help you out. Scotty.

@@ScottyzBuildz Thankyou sir I appreciate your advice.

@@DevRevsIt Thats ok I appreciate your follow. Thank you

Thank you so much

So far, I haven't braced it under the shutter, and I haven't had any issues from the weight. I will do a future video making braces that will help support and transfer the weight to the tie down bolts. I'm not sure of the total weight you can load on top, but I would be getting close to the limit without a brace.

Hey, yes, I will find it and put it in the comments and description

AU$65.19 51%OFF | 1-40 Steps LED Stair Light Strip Motion Sensor Stairs LED Strip Light With 2 Sensor Easy Insallation Stairway Step Light Strip a.aliexpress.com/_mKfONCA

Thank mate appreciate it

Let Me know how you go.

Thank you 😊

Haha, that's awesome 👌 have the brackets held up? I have set the annex up once, and it was not easy learning how it went, lol. I totally agree with the walls. I have one, and yes, it was very expensive for the full kit

@@ScottyzBuildz The brackets are rated for 50kg each, and I got 3 of them. There's a bit of bounce and flex, but they hold. The walls add a bit of weight as well, and it flexed a bit too much. I've cut off the original brackets with a grinder and attached them to the galvanized one at the rear. One above, one inverted below in a kinda 69. Stumbled on your vid while searching for ideas. Another downside to the walls is the one with the door can only be hung in one position, the front, as it doesn't have a zip on both sides. I had intended to get 2 of those for a cross breeze, but it's not possible.

@ElfAzzid oh nice sounds like you have done well with the tools you have. I'm glad to hear my video came up, and I hope you got some good ideas from it.. I want to get all the walls but I didn't know you couldn't put the door wherever. That's a shame.

Thank you so much 😀

Thanks buddy

Thank you Steve

Thank you 😊

Thank you :)