Video

thanx... the one part i dont understand...how does the actuator connect to top frame? to cause it to move?

Hey it looks great 👍 looking to get the argonn yoke and maybe the rudder as well. Do you recommend those?

Unless you somehow completely decouple the four buttkickers from each other you will never get that "surround sound feedback" people try to obtain by using this many haptic speakers. Put one under the seat and maybe one under the pedals and call it a day.

Can't wait to get started on my build. Where did you get the plates that goes on the profiles?

Hi again, I'm wondering if the your rig motion behavior is connected to what FPS you are getting in the game ? on my rig especially in VR when my fps jump up and down the motion get disturbed with a quick jittering and shaking effect. I'm not sure if the SRS software sends data based on the fps we getting in the sim and if it's not good then the motion won't be as well. Thanks

Great video~ Where did you get that powder coated or did you just paint it?

How did you connect the TL swivel?

I found the measurements for the bottom platform but in another video for the traction loss frames you mention they are 40x120 and in this one you mention they are 40x80 which is too small to fit the TL plates that come with the kit I believe?

Hi @Simul8Master, where did you get these nice closed corner brackets from?

Do you have a link for the server cabinet you use for the control modules? Just trying to get all the ”extra details” ready before buying the rs mega. Thanks.

Thank you so much for this. I am about to get all my parts. This is so valuable.

Hi, love your setup. I am using the LG 48 oled monitors instead of the C3's like you...I have the triple monitor stand from trak racer. i wanted to know how did you mount the screens? which vesa mount are you using since im having trouble mounting them properly

Sooo How much motion would you like with your sim? "Yes"

Looks awesome. I've been watching all your content. I am looking forward to buying a motion rig for sim racing mainly and some MSFS. I am trying to choose between the Qubic QS210 or RS Mega+. I cannot tell why the RS Mega+ is half the price compared to the QS210; there must be a reason. The QS210 seems very fast and responsive, and you never get disconnected from the simulation or feel like you're floating in space. I've been watching all your tests and trying to imagine how I would feel using the RS Mega+, but you have it turned up a lot for my taste. I will use it with VR and probably i'll dial it down quite a bit. Could you please detail how you feel the motion? Is there any time when you feel the actuators doing something that disconnects you from the simulation, like coming back to position when the travel has been exhausted, etc.? Would you say it is fast and responsive enough to match 1:1 with what is going on in the simulator? Any lag? I am about to pull the trigger on one of these systems, and I would like to make the right decision. I really like the Qubic QS210, but first, I would like a good reason to discard the RS Mega+. Thanks a lot for your time and effort!

@OP .... Question ... what t slot nut size & bolt lenght did you need for the surge rails? I have m6 nuts but I'm not sure on the bolt length i need.

thats bad ass

Wow great sim

wow, amazing! would love to see it in action.

Wow, would love see a breakdown video like the one you have for the simracing

I have the NLR f-gt elite 160 rig, and I got the NLR free standing triple monitor stand like yours. However, monitor stand width is narrower than rig, hence stand is way far away from the driver. Did you face the same problem?

I may have missed it from your other videos but which parts of the surge platform connects to the traction loss platform?

I've been waiting to tackle this next upgrade but did see how everything came together. Super grateful for posting your pictures along with measurements. Gives me a good starting point as my rig is a bit longer. Looking forward to the next view. 🏁🏁

First of all, thank you very much for your video series!! It has motivated me to also consider a DIY solution, and all of your explanations have been very helpful. Due to limitations in my man cave, I'm wondering if it's really necessary to have such a wide stand in the back. The TL doesn't seem to utilize all of that space, right? Is it for stability reasons, or can it be narrower? How far it swings from left to right probably also depends on how far back I would mount the TL actuator. I only have 42-43 inches available. Have a nice day!:)

I see that yaw, surge are seperated from pitch,roll,heave on Eracing, If i only want more heave,yaw and surge movement respond more often than others, do you think Eracing is better than 6 dof stewart simulator? Thanks

nice, looking forward to part 2 :)

Ok mate what resolution are your screens?

I'm thinking I want to build a rig just like you, but it seems hard to build for both race and flight sim. Do you use rudder pedals? Is RS Mega good for flight sim?

Excellent videos. I just completed my build on a NLR F-GT ELITE chassis. It was a little more complicated than the TR chassis. Regarding your surge. How much surge are you getting? Mine is not very noticeable. EDIT: Also, there is no way I would have been able to complete this project without your videos. KUDOS!

At 7:40 you talk about the brackets being installed on the outside and colliding with your vertical profiles - do you not bolt the brackets (or rollers?) to the upper rig so that they surge with it? Is that not how it works? (i'm researching this as im about to order :) ) - thanks for your time

Is this 6 dof? Heave,surge,sway,yaw,pitch,roll

Great video! Very helpful. I had a hard time finding it, as the title of the video is slightly mis-spelled ("Measurments") and thus didn't show up. Just calling out in case you want to update to make this more visible to the community. Thanks again!

Thanks for this man, there's not a ton of info out there for this, or it's bundled with surge and I don't want to add surge so I'm kind of just guessing what parts I do or don't need.

Any tips on tuning or profile for srs for iracing motion?

What kind of spray paint you are using on the profiles? They look good!!

Where is part two Of this video?

Can you link or tell me what profile you used from Framing Technologies?

What series of profile did you use?

Is the actuator for surge 80mm wide? I'm adding surge to my simlab gt1 evo.

Thanks for these videos. I was struggling to find out how to connect the frames and components! Are you posting the Part 2 for the Traction Loss Platform (the lower frame)? i don't see it anywhere...

Bro, is the bottom platform really needed? Seems unnecessary. I'm thinking of adding the RS mega to my yaw2 and concerned about the added height as its already tall as it is. Can you just add a couple of skateboard wheels at the back bottom like the one on DOF h3?

hey I have a question. The profiles which you mounted the red actuator cup holders - are they 40 x 120 mm?

Did you get used to the bigger size of the wheel now after a month? I am on a v2.5x currently like you were and thinking about getting a M4 GT3 too when it is back on stock. Thanks!

Motion sim is the end game. But why aren’t you using VR? It’ll come to life.

hi, for me your motion is way too strong setup. less is more 😉

Superbe job peux ton avoir liste des course pour les rails stp

I see that you also use SRS... I also use it on the eracing lab actuators. I still play around with motion settings and didn't reach the level I would be entirely satisfied. do you mind sharing your settings?

Hello , what is the size of the metal cups please ? Internal diameter Thanks

That is a serious piece of kit! I would definitely move the seat mover to the flight sim or add motion to it. It is pretty amazing! I am building my TL now. Be safe and keep the updates coming!

Thank you so much for this

Great videos. I'm going to use your rig as a guide for my upgrade. Moving on from my GTTrack with Motion Platform V3. Ordering the RS Ultimate this week.