Video

Question, who did the optic cut for that plate?

Galling happens all the time if your male and female threads don't have enough clearance (class of threads) AND both materials are the same type & grades of steel. Stainless is the worst at galling. (titanium is just as bad) In this instance you needed the proper anti seize on the threads. For very high temps use NICKEL based anti-seize. About 25 years ago I threaded a stainless barrel for a A2 flash hider, using the flash hider as a "gauge" for fitting the threads and a single point threading tool in my lathe. Later the owner of the barrel screwed on a AAC Ranger stainless suppressor that galled. We had to use a hydraulic press to hold the barrel and when removing the suppressor it ripped the threaded end right off the barrel. Had to bore out the suppressor to remove the end of the barrel and internally re-thread it, but it worked. ALWAYS USE ANTI-SEIZE on stainless vs stainless. Iv'e installed many suppressor brakes. If it's properly torqued it won't loosen off. No need for Rocksett as most customers come back later and want the mount removed and installed on a different weapon.

Do they offer a barrel for it

Are the thin boggies the same thinness as the shadow 2? I just ordered the thin boggies for my cz omega? Does anybody know?

I bet he would have 0 recoil if he put his hand over the muzzle

Radical improvement.

Nice 👍 tip thanks

Such a stupid video

Turning a 600 dollar gun into an 1800 dollar gun. Not counting the Trijicon.

great video! but hey definitely invest in a bluetooth mic. I will be subscribing regardless

Soft stainless steel has low Charpy strength (corner strength). threads are nothing but a bunch of corners. 300 series stainless and non-hardened 400 series stainless is known to gull in the threads. at works I specify stainless parts with threads to be hardened, this prevents the gulling. It is possible the barrel material or the attachment were softer materials basically below 35-40 Rockwell C in the threads. 416 barrel steel is usually 35 Rockwell C and up. If you drop that attachment on the concrete and it dents, that means its soft. it is is not damaged then the barrel is soft. in order to start the gulling process the stainless needs to have micro fractures from friction in the surface and the fractures open up and the material from one of the components enters those fractures, and boom you have gulled the threads. if the material is hard enough it will not fracture from friction. I suggest using pipe tape for a grease free barrier. I have messed up printed call out on 2 and 3 classes of threads with littles issues in stainless. class 3 has the tightest fit and class 1 has the loosest fit for perspective with class 2 being the standard fit.

Sorry. I don’t get it. But since I’m not a fan of lights and red dot sights, and stock triggers are fine by me, I guess it’s not surprising…love the gun. Would like to feel the grips. They look great. But it would be a sad place to live if we all liked the same thing.

EXCELLENT FUNDAMENTALS!!!!

THAT'S EFFICIENCY FOR SURE

You make it look so effortless. You know a man is good at his craft when he makes doing something look easy.

Stay Ready So You Don't Have To Get Ready

Just Came Up On My Timeline. Great Video.

Why do people buy these in 5.56?

This is my next purchase!

I’m just letting people know. The shit isn’t gonna work now because of that orange paper insert that they put in the muzzle device package saying he uses class three threads that you don’t want to use a different class 3B3 whatever class two whatever type of thread

That really sucks once all the said and done, the barrel itself is 1000 bucks Now be aware your fire on their most recent muzzled devices have an orange Paper that tells you the class of threads that will work with it and do not use it with that because they’re not gonna be liable as does a company that makes your hundred dollar muzzle delays thousand dollar suppressor but they wanna lose $1000 every time someone takes a chunk of threads out of the barrel course not so companies of getting even high end companies they’ve been getting very very like where they used to be like oh we could do that for you no problem or let me check. We might actually have some MK 13 hangover still are not the same as they used to be

I have almost the exact same set up on my SP-01. Same colors and everything except I went with a EPS Carry optic and a TLR-1HL. That pro package is awesome.

Thanks, there are few videos out there as thoroughly informative. Kudos !!!

Fcd makes the best saftey selector on the market. But having purchased 2 I don’t know if the upgrade is worth the price increase

What's the price of that setup?

I had to replace the hammer spring with a good one cause the blue kept having light primer strikes

what the distance?

Any mounts compatible with Holosun HM3X?

Nice piece, random but your voice tells me that you can make some good ribs 😂

Yes but this is gunsmithing. Isn’t it? There are licensing requirements for that right? Does that impact things like drop safety? I loved the explanation about the functioning of the gun. Hard to find on the internet in such a clear fashion. I have a Shadow 2 since May, shot probably less than 500 rounds through it, so mmmh mine will stay stock for quite some time! 😊

This is a good video, thank you for taking the time to put this out.

What website can i look at this holster?

If barrek threads come off just from tightening a muzzle device on then its a garabge barrel no mstter the price and hype. Ive put on a million different muzzle devices and brakes and all types of everything and have never had this happening. The barrel threads had to be off. Yes school of american rifle explains the importance of chekcing whay type of threads they are

Just picked up a p01 myself, I noticed a little bit of play in the slide when wiggling it side to side… it is audible when shaking it side to side, maybe 1/32 or less of play, just curious if you see the same in your gun

Cajun Gun Works is the best in the business when it comes to CZ.

Not made for that round.

Brother, thank you! Best video on this 👍🏻

Best goddamn pistol ever made!

I had the SAME exact experience with a brand new Surefire SOCOM MB and new Proof carbon barrel. Same issue, not tools just hand tight. I had two identical MBs. Confirmed the other installed no problem on another Proof barrel. Short story was SF denied any liability and after arguing, they eventually agreed to replace the MB but stated the device was “in spec”. Not the first negative CS experience with SF and looking at the threads on the defective MB, it was clear there were some burs that were not removed before coating.

I hate that it's 10 different colors of 💩 brown

That's nice. How much does it cost? Like $600 for the pistol another $600 for everything but the light and optic?

Been there done that, but with rocksett in the mix. I now order new muzzle device for each new barrel.

The most irritating intro ever.

I’m having issues with the absolute riser. With my 510c I’ve maxed out the lowest elevation setting and it’s still too high apparently. I still have to hold the dot quite a bit above the intended target to make a hit. I’m not even using the holosun spacer on my 510c for this build either. I’m confused, because I’ve seen people run optics like eotech on the absolute riser, which sits even higher than the holosun. Unless eotechs just have that much more elevation/windage adjustability?

What p-01 model is that one?

He’s not using technical language. He’s using gish galloping and obfuscation through the big words he uses that he doesn’t really know what they mean. The truth of the matter is, Ben Stoeger and Matt Pranka offers a better product, that being hard skills in shooting, than Travis Haley or Chris Costa ever could offer.

You got a bit of a hand jidder

Just adjusted my Radian Talon from 45 to 90 degree throw. It feels like the safety glides and there’s no hard detent like a mil spec safety. Feels like a competition gun. Bad for combat though cause it’s hard to notice the click under stress. Best i can describe is how a regular pistol slide feels when u rack it vs a 1911 or sig p239. $35-40 safety lever feels like magic 😆

How much ?? Nice 👍

If you want it higher buy the unity absolute riser