Video

Omg we encountered the same problem last night, just found your video today and it was very very helpful. My dryer is up and running like new now, thanks to your video and to my handy Man husband 😊

They never go back

What size wire did you use to connect it??

MacGyver.

What is the chemical that you used?

Hi Steven, Would you like to try our handheld pool vacuum? if you are interested, please send me your email, thanks.

Its medals… tap water…. Test your tap water folks

I was worrying over this for like 3 days. It was that easy.. Thx man

THANKS! Great instructions. I put a large flat pan under the front of the machine to catch the water.

One other thing to check on these is pull back the rubber shield thing around the door opening and make sure no socks or other small clothing is stuck behind it. That was causing a lot of my smell issues in the drum.

Can you explain why that worked? My 2013’tacoma is doing something similar

does it climb walls? mine doesn't 😑

Thank you!

You fixed the symptom but not the problem. You must replace the relay on the other side of the board. It overheated and generated enough heat to have a micro explosion that blew off the soldered joint on the other side.

So I basically did as video shows and it worked! My unit had total blackout with no codes no power and a wet load .The only difference is my unit is newer kenmore he4t and the 7mil bolts were 3 hex screws . Ended up using a scissors Jack but wasn’t needed.If the feet on your unit are tall enough you will be able to do it without lifting..cheers for the video.I thought I knew everything but never thought of filter for washing machines..Makes sense…

He is so sad he lost his money but he learned how to manage money

Shoot! I had really high hopes that this would be my fix. Unfortunately my circuit board was not damaged at all. No scorched plastic, not bad solder connection. Any thoughts? Thank you!

If I lay on top of my dryer like you did with yours it would dent it down against the tub and I'd have to listen to it scrape against it for the rest of my life or until I took the top off again and pushed out the dent. I don't recommend laying on the top of your dryer or putting any real weight on the lid at all.

The only suggestion I have is one you take the cover off take it off those blocks as that water runs to the slope of your floor and its about 1/4 to a 1/2 gallon of water in there.. OR put 2 towels in the back to catch that water..

Incredible! 💦

Magic Eraser works too. Just a little more work, but no backwashing needed.

🎉

What is the name of the machine you used?

🎉

thank you very much. I had to try twice. the first time, I didn't do a good job with the soldering. I watched a video on how to solder and bam I got it. Dryer is working well. It cost me 4 bucks, I had to buy solder. Thank you very much.

Repost with better title..

Nice. Can you give us an update?

It’s revving too high, you need to adjust the governor. Check your oil and see if it’s above the mark, smell the dipstick and see if you smell gas if so then you might have a leak in your fuel pump diaphragm. Nice little unit would love to have one 👍

I kept getting F21 error code, this video helped as I didn’t have a trapdoor on mine either thanks

just sound....

Famous last words "don't be afraid of electricity," 😂 RIP kind sir but thanks for the great video.

happiest boy!!

Its s snow plough

I actually built myself a 'ramp' from scrap wood (real sturdy, almost solid wood all through). This way I can easily slid under my good old Mitsu Lancer...

So, this thingy actually has a front jacking point?! Cool.

1 yr w/o changing is actually bad in my personal experience. Even after 6 mo it comes out real dark.

I always lose my dam 10mm socket and wrench! Wtf?

Thank you , for showing the video !

Good job, buddy, that was so fast!! Give him some cards to stick in there Dad❤

We used to use cheap baseball or Pokémon cards for this! Felt like I was the boss of my culdesac😂

Nice one

Check out Kranzel pressure washer at obsess garage. You can mount it on the wall inside your garage with a nice hose reel. It will last a lifetime and it’s super quiet

I would never get under the car just relying on the jack.. Even if It’s a quality jack it doesn’t matter never get under a car without jackstands

Wow exact sams issue. Exact part of the circuit. Fixed her. Wife said she's gonna blow me for it later. Great video man. 💪😎

Do you have the link for the relay?

🔥🔥🔥🔥🔥🔥

Thanks

Thank you sir. Its snowing here in Virginia, and the dryer quit for the 3rd time being something different every time. This time, this issue you spoke of was the problem. I pulled the burned board out and soldered like you mentioned. Back in business with a total turn key job less than 45 minutes. Included the walk to the shop in tje snow storm. That was a challenging part .lol.😅

It worked! Thanks!

Now here's a smart man, using Amsoil Signature Series