- 16
- 98 318
Mike M
Registrace 29. 03. 2014
Use a stove fan for Dyno Glo wall heater!
As an alternative to the electric / powered / corded heater fan, I opted for a traditional wood stove fan to help circulate the hot air generated by the wall heater. For the price, I would rate this as a success.
There are dozens of choices on the internet, but I selected a model intended to mount to a vertical stove pipe - the more common version sits flat on top of a wood stove or wood burning oven. This model hooks on top to make the heat connection.
No wires, no plugs, no additional utility cost!
There are dozens of choices on the internet, but I selected a model intended to mount to a vertical stove pipe - the more common version sits flat on top of a wood stove or wood burning oven. This model hooks on top to make the heat connection.
No wires, no plugs, no additional utility cost!
zhlédnutí: 1 595
Video
Upgrade & modification of Coleman CT200U-EX mini-bike foot pegs / foot rests (step-by-step install)
zhlédnutí 5KPřed 3 lety
This is a popular upgrade for the Coleman and other mini bikes that come stock with the small round peg. These offer more area to rest your foot and are spring-loaded. This particular part was sourced on eBay, but you can find different ones on the typical web outlets. If you'd like something better than "metal-like substance," you can spend a few bucks more. Even as the cheapest ones I could f...
Coleman CT200U-EX Mini-Bike: Solving engine hydrolock and removing throttle stop (governor)
zhlédnutí 20KPřed 3 lety
(1) Explanation of hydrolock common cause as well as walk-through of repair: This is a problem that happens with many small engines and the Coleman 196cc is no different. No need to freak out when this happens to you. Get your shop towels ready! Second part begins at 6:00: (2) Removal of throttle stop and adjustment for increase in speed and acceleration: Everyone mistakenly calls this the "gov...
Coleman CT200U-EX mini bike brake light installation (step-by-step)
zhlédnutí 47KPřed 3 lety
* Thanks to my First Class Scout (Elliot) for camera work and assistance in editing. Putting his Moviemaking merit badge to good use! Tools needed beyond the basics: Wire cutter / stripper Electrical tape Wire connectors (wire to wire, terminal) Drill with 15/64, 5/16 bits Link to prior video (shorter) with summary and overview: czcams.com/video/lpmh2jICfJ8/video.html This installation should a...
Brake and tail light set-up for Coleman mini bike (CT200U-EX)
zhlédnutí 24KPřed 3 lety
* Sorry for the vertical view - didn't think about it until midway through . . . Installation / walk-through video link: czcams.com/video/D-C9ChVvaHs/video.html From the factory, these mini bikes do not have a tail light nor a brake light. It’s a safety issue and in some states, these are required to ride trails on public lands / state parks. This set up will NOT make the bike “street legal.” I...
Paced lap at Portland International Raceway in Superformance Shelby Cobra!
zhlédnutí 33Před 8 lety
Paced lap at Portland International Raceway in Superformance Shelby Cobra!
Ugh, wing nut fell down there ,,, what next?
Do you have any links for the exact parts you bought ? Your channel is great for mini bike mods
At least you can wire up things this can be used for any bike. I have one thinking also I have a MTD mini bike and a couple trikes
Sweet video dude thx so much cause I got pulled over by the police and everything was good but they said I needed a tail light so I just went the easy way and bought a tail like for a bicycle which works well other than its always on but I guess it's better than nothing for now until I just seen your video thx again Mike.
I have the same one - problem is it blows the air towards the wall & reflects off of that
Can you put the links for the items that you used? I've seen some other people asking this as well.
I need this so bad we only have propane, I can’t find this one
There are several listed on Amazon. I would compare the size of the fans - get one big one or two little ones, they both put out about the same air flow.
Do you have links for the everything?
Sorry, no links. Just use search on Google or Amazon (that's what I did) as the parts and suppliers tend to change.
So I did lose the wing nut somewhere in there I couldn’t find it at all I ended up taking off the recoil thinking it fell in there now the recoil pull cord won’t go back in it loosened up and now I have to buy a new recoil pull start and still haven’t found the wing nut
Anyway you could provide a link. I can't find it.
Man your clip here helped a Mexican out thank u
Wish I’d seen this before I completed mine. I used the tension switch for my LED brake lights.
Fun fact. RC LiPo batteries are the best batteries for these projects. Get some XT60 connectors and you're golden.
That's a great idea. I didn't want to bother with swapping them out and recharging, but that would work. The little battery I used was pretty cheap and for as little as you use the brake light, it should last a long time.
Do you have links for the break light and the battery?
Do you have the link for this kit on Amazon?
Cant the brake light be hooked to the front light wire?
Just bought the bike an hour ago and already got it hydrolocked
Are you in Arizona??
Great video. Wish you put links to what you got
would you provide the link for the "switch" on the lever assembly? thank you
It worked! Little too fast. HA!
I have a brake light and a 13,000 lumen mini LED light bar on my Baja I do a lot of night writing with a couple buddies in my battery will literally last almost 3 weeks with having it on during the day and at night when I ride so at least 3 to 4 hours each time I ride three times a week it'll last for almost a month before I have to charge it
Question i put a bigger motor on my mini bike how can i connect my front headlight to the battery and on and off switch i got the rear lights down just can’t figure out my big one
Please give more info on battery size and #
What Battery did you use❓❓❓❓❓❓‼️
The new hand bracket wouldn't fit with the old hand lever?
Nice how to do you have a link to the brake light thank you
Can you reply to this comment on where to buy these pegs?
Couldn't you just back the throttle screw out which would allow the plate you cut with the to move as far as you back the screw out
I was lucky....mine wasn't tack welded... backed it right out
I sure wish you could do a video hooking up the turn signal wires I followed every thing you did now I want turn signals and a horn great video …
You have know link for these parts
Im waiting on a massimo mb200 and i ran into the same issue of no one doing it so ill probably be making one of my own for that along with some underglow
Why does mine take off on choke when crank it. I literally have to run n jump on
I just cut the screw. Fast and easy.
What's volts on the battery your using and if you wanted to add blinkers is it enough power for both brake lights and blinkers?
12 volt battery should be plenty for signals
This is a great step by step video!
Thank you for the kind words!
Very helpful 👍🏻
So black from the brake lever switch goes to positive on battery and green goes red on brake light?
It really doesn't matter as long as you're consistent with the wire colors (to create a proper circuit).
I have the MB200v2 doing the full street legal conversion. I have video series on different bikes. All mods and restorations.
This didn’t work 😡😒😞
Pot metal
Yes, these aren't anything special. Probably the same material as the OEM, but the shape is much better to handle your feet.
I backed into a rock and snapped my original peg in half cheap aluminum I upgraded to pegs like this I love them
This video is 🗑
Hi! We just got ours and literally on the second ride the arm wire that goes under then engine isn't pulling and now it doesn't accelerate quickly it moves but when you pull the throttle it doesn't speed up, any suggestions?
There is a phillips head screw assembly at the connection point above the engine. My guess is that the wire may either be too tight or not tight enough, such that when you are twisting the throttle, the accelerator wire isn't fully engaging and allowing more fuel to flow into the carburetor. Alternatively, if you think of a brake lever on a bicycle, make sure that the connection at the handlebar / throttle is tight enough so twisting it is actually making that wire react. Good luck!
do you need a plate for the mini bike cause I live in connesville pa I just figured to ask
It depends on where you live, of course. Some states will issue a plate fairly easily, but others want lights, signals, a horn, etc. Also, you need insurance if you ride on public streets.
In PA mini bikes can not be made street legal unfortunately
I didnt drill my hole straight on the brake lever for the light and it fit perfectly so i didnt even have to adjust anything lol 🙂
Can you put the links for the items that you got to use.
This worked on my Coleman too. Great video - thank you.
What the brake lever part name cuz I can’t find it with the wire