Video

yes buttons are working. I am able to change radios, my music, control volume, everything.. Also via numbers I can change preferred radio, or via touch. What lights? Lights for buttons are ON only if I turn evening lights on the car. (Same as before, no change is in that). Also I am able to control from the steering wheel, as radio was delivered with CAN BUS module. But after startup you need to wait like 1 minute until all is loaded, so it will not react on the steering wheel or buttons for that time, then OK.

@@RGPinger thanks, so munch!

Onto RFID Domination Timer that can bring you new feature into your Airsoft/Paintball game. Suitable also for LARP, MilSim events, as there is possible to integrate hundrets of RFID cards, wristbands.

No. I have put there bin file you can use. Never more any PHY Ethernet sketch from me to anyone.

​@@RGPingerI don't really have a use for a thermostat or bin files, just needed to get Ethernet working. I figured that out a while back now, thanks anyway

I can sell you .hex if interested.

Ej bisťu

Slovenia is 500 km from Slovakia. Totally different country.

On vie, ved to je češko 😅 píše to pod každé video 😂😂

Nie, chalan neplace kazdu druhu minutu a chalan nema 11 plastik ksichtu

A ty nie si ani Ronaldo, ani ten chalan. Si len ďalší z radu frustrovaných lúzrov.

​@@hlbaciskoRonaldo nemá žiadnu plastiku jedine sú dal opraviť zub to je všetko🤣🤡🏳️‍🌈🫵😍💪💙🤍🩵😍💪💪

@@Uicdjjdj123ma veľa plastík sak to je verejne známe 🤦‍♂️

No, that are UIDs of RFID cards encoded into unsigned long variable.

No, as I powered it up properly. Not with weak source.

also I use program that can auto-init Ethernet once link is list, etc.

hard to say. I have tried only DHCP - dynamic IP. Everything worked without problem. I was using ETH library that is in-built in Arduino Core for ESP32. Tested on Arduino Core 2.0.4.

​@@RGPinger I can make it work on esp32-wroom-32u. I really liked the content on your channel about IoT, keep it up.

@@matheuscaltran1573 thanks a lot boss, I'm glad u liked my videos.

i will check it. But for now it looks more like leak somewhere at throttle body.

Hey mate have you found this as mine is doing the same thing now.

Source code for ESP32 and PHY Ethernet LAN8720 is available for free. Visit project's webpage at: martinius96.github.io/hladinomer-studna-scripty/en/ Choose HTTP or HTTPS test web interface, then use Program subpage and copy-paste code to your Arduino IDE and upload firmware.

I sell RFID DOMINATOR in machine code .hex only. You can test shareware version for free if you want. Machine code is available at projects webpage: martinius96.github.io/Airsoft-DOMINATOR-RFID/en/

Unfortunately no, code is only available in machine code .hex for testing on supported hardware. Application .ino (source code) is not available for people. Firmware in machine code is available on project's webpage in description. Feel free to test it with your hardware: martinius96.github.io/Airsoft-DOMINATOR-RFID/en/

Hello, these standard LEDs used in project draw like 5 mA because of used 1 kohm resistor. If you use slightly lower resistor, you can increase bright of LEDs, but they will heat and can break during time because of overload. In case of LED strips, there are more options for that. You can use relay to switch other circuit with more powerful LED strips or bulbs that have for instance also separate power supply. So there is possible to use 230V AC without problem. In case of Arduino itself, there is current limitation like 400 mA at 5V that can peripherals draw. So you cannot power high-current LED strips directly from it. But you can control them from Arduino, for instance WS2812 strips. You can use also transistor or FET except relay to power it up.

The led strips I have are 5v

Hey do you have discord? Would be easier to talk about details.

@@ArrowSmith95 you can power them directly from Arduino, if peak current will be not above 400 mA. Unfortunately I dont have Discord.

Thanks man. You're awesome.

Thanks a lot, unfortunately, project is not available for free. Program in .hex is compiled program, so it can be uploaded to Arduino with ATmega328P chip. It is not editable (as .ino). Program in .ino is not available. I am selling only .hex program of full version of RFID Domination Timer. For MAC users HexUploader should work: github-wiki-see.page/m/paulkaplan/HexUploader/wiki/Using-HexUploader. I have tested only Xloader on Windows machines for uploading .hex to Atmega328P.

@@RGPinger thank you

sure, yes, you can. Output is identical for 16x2 or 20x4 display (output is only at 2 rows) and max 16 characters. Shareware version is for free (it will let you measure time up to 15 seconds for each team) and you can find it at: martinius96.github.io/Airsoft-DOMINATOR-RFID/en/button-dominator.html It is available for standard I2C address for display - 0x27 / 0x3F. Full version is paid (20€) without time limitation. Both versions are in .hex format (machine code for Arduino Uno / Nano - ATmega328P chip). I don't sell .ino app, it's private.