![Aaron Johnson](/img/default-banner.jpg)
- 21
- 204 214
Aaron Johnson
Registrace 26. 03. 2006
Awesome Surprise Home w/ Super Garage aka RV Garage
For all your real estate needs please contact Aaron Johnson @ 623.226.8005 or email @ aaron@thekeytoaz.com
I am so excited to show you this one of a kind 2585sqft/10800sqft lot 4 bedroom, 2.5 bathroom beautiful property located in Surprise, AZ. Gorgeous and hard to find newer RV home with a beautifully landscaped yard in Asante. Open and inviting Camelback floorplan with three beds, 2.5 baths and a flex room that is the fourth bedroom. The gourmet kitchen has a 5-burner gas cooktop, 48'' upper cabinets with crown molding, ss appliances, granite, a large walk-in pantry, and is open to the large living room. Lots of natural light throughout. Three car tandem garage plus a 40' RV garage with epoxied floor, mini-split a/c, and rear entrance. Oversized master suite with amazing bathroom that has a huge walk-in shower and a closet that's big enough to be doing double duty as a workspace currently. The backyard is an amazing example of outdoor living at it's best.
The bbq are, large gazebo, and extended patio makes entertaining a dream. There's even a large turf area for kids, pets, or just enjoying the green without all the maintenance. Mature trees, raised gardens and an abundance of colorful flowers make this backyard feel like you're on vacation. Across the street from a green area that has a walking path that takes you past the community park and library, as well as Asante Preparatory Academy.
CHECK OUT OUR OTHER VIDEOS
czcams.com/video/ecsMOjxO9i0/video.html
czcams.com/video/ifJAFCHlkg4/video.html
FIND US AT
www.azvalleyagent.com/
www.thekeytoaz.com/
I am so excited to show you this one of a kind 2585sqft/10800sqft lot 4 bedroom, 2.5 bathroom beautiful property located in Surprise, AZ. Gorgeous and hard to find newer RV home with a beautifully landscaped yard in Asante. Open and inviting Camelback floorplan with three beds, 2.5 baths and a flex room that is the fourth bedroom. The gourmet kitchen has a 5-burner gas cooktop, 48'' upper cabinets with crown molding, ss appliances, granite, a large walk-in pantry, and is open to the large living room. Lots of natural light throughout. Three car tandem garage plus a 40' RV garage with epoxied floor, mini-split a/c, and rear entrance. Oversized master suite with amazing bathroom that has a huge walk-in shower and a closet that's big enough to be doing double duty as a workspace currently. The backyard is an amazing example of outdoor living at it's best.
The bbq are, large gazebo, and extended patio makes entertaining a dream. There's even a large turf area for kids, pets, or just enjoying the green without all the maintenance. Mature trees, raised gardens and an abundance of colorful flowers make this backyard feel like you're on vacation. Across the street from a green area that has a walking path that takes you past the community park and library, as well as Asante Preparatory Academy.
CHECK OUT OUR OTHER VIDEOS
czcams.com/video/ecsMOjxO9i0/video.html
czcams.com/video/ifJAFCHlkg4/video.html
FIND US AT
www.azvalleyagent.com/
www.thekeytoaz.com/
zhlédnutí: 201
Video
14916 W Mark Ln
zhlédnutí 39Před 2 lety
www.azvalleyagent.com www.thekeytoaz.com Aaron Johnson Realtor® Real estate agent custom home,custom home builder,custom home building,custom home build,custom homes,custom home tour,custom home ideas,building a custom home,custom home building process,custom home features,custom home plans,custom home design,custom home design tips,new custom home construction,building a home,custom house tour...
7425 W Willow Ave
zhlédnutí 27Před 2 lety
For Sale is this beautiful single family home. 7425 W Willow Ave Peoria, AZ 6bed 3bath 3596 sqft. Enjoy the video. www.azvalleyagent.com - Realtor® Aaron Johnson www.thekeytoaz.com - LA Melissa Twitchell
Beginner 10 year old solves 3 rubiks cubes and a pyraminx
zhlédnutí 46Před 3 lety
my son just start doing these cubes about 4 weeks ago and i thought why not show him off a little :-)
Ride to park to play some basketball with my son James.
zhlédnutí 96Před 6 lety
My son and I went in the Accord to go play some basketball at the park, he always asks me to upload the videos I record to CZcams but usually they are so long I don't have the time but this time I did. it was about an hour or so of total footage but I shortened it up to about 6 minutes. You're welcome James. #howtoteachyoursonhowtoedit
Honda Accord Clutch Master Cylinder Replacement CB7
zhlédnutí 132KPřed 7 lety
In this video the clutch master cylinder on a honda accord CB7 is installed. I did not get a chance to finish the video up but the bleeding process was just about the hardest thing to do.
Honda Accord CB7 Euro R Burnout Part3
zhlédnutí 412Před 8 lety
My buddy doing a burnout in his Honda Accord with a Euro R swap in it.
Honda Accord CB7 Euro R Burnout Part2
zhlédnutí 315Před 8 lety
My buddy doing a burnout in his Honda Accord with a Euro R swap.
Honda Accord CB7 Euro R Burnout
zhlédnutí 579Před 8 lety
My buddy doing a burnout in his Euro R(Swap) Honda Accord CB7
2 Euro R H22 CB7 Accords Racing From A Dig
zhlédnutí 392Před 8 lety
This is my friend and I with similar cars racing in the sticks.
Euro R H22 CB7 Accord Sedan Vs Coupe
zhlédnutí 374Před 8 lety
This is my friend and I racing around in the sticks.
Anyone who’s struggling with the cauter pin i recommend taking a screw driver to pull the cauter pin off using the loop to secure the shank, worked like a charm for me
Are Adler clutch master cylinder’s reliable?? How’s it working so far?
For some reason it said Adler on the box but it was a brand new Nissin product which is 100% OEM...it is still working wonderful as of today 🙂
@@aaronphx420 I’m having to replace the CMC for the third time. Honda want $234 for the part. If Alder/Nissin is good I’ll go with that
No Clutch pressure on top of not able to shift into any gears. I'm guessing this would solve this? Already replaced clutch and slave cylinder. Haven't replaced master yet
Same issue here. Have clutch. Replacing master though because I think that may be the issue. Figure it out?
does anyone know the part number?
what year Honda is this for?
90-97 Honda accord
TShhh tshhh tshhh
Hard to follow. Worst how to I've seen please take the time to actually explain next time.
Chew chew chew.
Frustrating job, took me almost 2 hours. Used my vacuum pump to pre bleed, that helped
Nice house, you know why, it's cause my money don't jiggle jiggle it folds
Nice house
Yeah it is
This vid inspired my cb7 euro r build
That’s me but I’m 10 now!!! Edit I’m 11 I’m 12 now 13
THAT COTTER PIN IS THE MOST EVIL FUCKING THING IN THE WORLD i will never ever ever change another one of these in an accord
If anyone is about to do this job. A tip would be to have someone weld a nut (the same size and thread as the master cylinder mounting nuts) To one side of the master cylinder fork. (The Part that the pin goes through) And now you can use a hex head bolt to connect the master cylinder to the pedal. Eliminates that pin nonsense
I hope that McDonald's job working for u
This has to be the worst hack vedio On a hack upped car I have ever seen Your moron ass said 3/8 When it's a 10 millimeter And half your wiring harness Is just hanging out in the video Just show how much u have no clue wtf your doing But you feal u have to have gloves on Cause your amateur .... I wouldn't let you work on my tricycle add I'd thinks he might get aids from a care ... You have no idea how to work on Lmao HACK
You funny dude , working on a 95 CD with euro r FRONT JDM CLIP yes even headlights and fenders and come with the Euro r engine .. #hseriesgang
Any ideas why it's hard to put into gear ?
Either your slave cylinder is bad or there is a leak in the hydraulic hose, no dot 3 fluid in the reservoir or you clutch is bad or the synchros in your tranny is bad, I would fill the reservoir with dot3 fluid first and go from there
@@aaronphx420 thank u brotha 🤙
Still tiny bit of air in line? I’ll pump n dump at least 5 cycles
I appreciate the video man you would be the only cb7 doing a clutch master cylinder replacement. But it is a bit hard to see exactly what you're doing cuz the camera is not getting in good spots so having a hard time seeing stuff. Damn it mine would go out and i need to do this work. How difficult was it for you to bleed the system? That's one of the things that's making me worry
It was not easy and definitely takes time but as long as you keep doing it, you will eventually get it done. It helps if you have a helper to actually pump the clutch pedal or bleed the slave cylinder.
Stupid question but is than an h22 I see????
Yessss obd2 01 jdm accord euro r h22a in a 93 accord
@@aaronphx420 That's amazing man! I have a 90 Accord Sedan (with the 5 speed) that I wanna do an h22 swap on. It's got the stock f22a4 with about 240k on it. But it's my first car (bought it a month after my 17th bday) and I'll have had it for a year in july. Great car but want more power lmao
I just replaced the slave and the master clutch and still have no pressure and pedal goes to the floor. Any ideas?
Are you getting any fluid at the bleeder on the slave? I ran into an issue with the lines being clogged and had to take them off the master and blow air through them to get fluid.
@@Cody-kd5dw It took some time but it needed to be bleed. It good now.
I'm gonna need to do this my clutch doesnt come back up all the way and its leaking a hell of a lot of brake fluid inside the car
Yeah that definitely gonna be your problem
My clutch pedal randomly sticking to floor will new master fix? What were your symptoms?
Yes that and the slave could be the problems, usually people replace both at the same time
@@aaronphx420 ok i did slave today and same symptoms doing master next. How long does it take to replace clutch master?
@@Mister_Shells about 2 hours....it took longer to bleed...but keep bleeding until all the air is out
@@aaronphx420 okay any other tips on getting clutch master out? I guess I’ll watch video again
I just brought an h22a back to life. Im siked
Hey Aaron What parts did you need exactly to hook up the cruise control? And also Im looking at Rosko racing what did you need for the iac parts? Im close to pulling the trigger on this motor but Ive yet to see a complete write up on it
Were you able to keep cruise control?
H Roberts yes of course, you just utilize the stock cruise control actuator and it should work perfect
@@aaronphx420 what about the vacuum line?
H Roberts if you’re just doing a motor swap then there should already be some sort of vacuum line running over there that would essentially just tee off from the intake manifold running everything else like your brake booster and such.
What angle of needle nose are best? I've tried straight and some 90-degree versions and neither worked.
Timmy MacGruber I used a 45°
I got a lsd transmission with the h22 it came with the mid shaft what axles can I used they told me the accord wouldn’t fit any idea
Hey sorry my dad can’t reply. He told me to reply what car is the engine and transmission going into? If it’s a 90 to 2002 Honda Accord they should fit with no problem
So if I use my stock one can I use the h22 bracket or haves to be the same as stock from my f22
Yes
You use the h22 power steering pump
orlando morales you can but it has a different fitting than the stock accord...no matter what you need to get the line braised
I have the stock accord pump
I did everything mentioned in the video. But im leaking fluid from the top of the nut where the line goes to the master cylinder. I pulled the line out to check the flare and threads on the nut, theres no cracks or crossthreads. Does anybody know what it could be?
Kw Skater might want to try some liquid thread sealant or just regular old Teflon tape as a fix
@@aaronphx420 i thought that at first but it wasnt leaking from the threads, it was leaking from the top of the nut where the line goes through. I ended up buying an O-ring from oriellys and putting it on between the flare and the nut. It worked but i need to bleed the clutch some more.
Is it still working? Mine is getting ready to fail I was thinking of buying honda parts what brand did you use?
It is still working I got that particular part from Amazon, it is 100% an OEM part
Anybody else catching hell with the metal line on the top? It breaks but the line seems to torque along with it.
busara 45 theVillain use penetrating fluid and it will break loose
I want to do that to my 02 accord using the euro type r engine. Anyway you can hook me up with a list to what I need to do or a link ?
Terry Carver all you need to do it order the motor and ecu and maybe upgrade your transmission...other than that I think everything is pretty straight forward because it’s obd2 to obd2...the only thing I can think of is maybe a jumper harness for the ecu
I thought I heard something about oil pan and a few other things . I think I failed to mention getting it through JDM
Terry Carver yes it may require a f22a oil pan from the 90-93 accord and this motor is oil available in jdm vehicles, this particular motor was from a 2000 Honda Accord euro r. Hmotorsonline is where I have gotten all my motors from.
I have an 02 accord. .
Terry Carver yes I believe if you drop a 90-93 Accord oil pan on the h22 euro r it will fix the clearance issue on that year Accord, I have the same accord style as you too, I can check the clearance between the 2 next time I change the oil in both.
A fellow Cb7 owner, I have a 91 lx sedan that’s still stock besides the borla exhaust, I love you car
I wish I could give you more thumbs ups.
Current task....I hope this fixes my issue with the clutch being stuck to the floor
O'Shae Pryme it could be the master or slave that makes that happen, but more than likely you’ll replace both at the same time...that would be your best bet
Same. Just ordered parts,good luck bro
Looking to buy an H22 Euro R, how do I know its the Euro R when im buying it?
Kevin Norman so the head will have PDE on it and the block serial numbers should be low and the casting will have the year made on it, it should say 00 or 01 because those are the only 2 years the Accord euro r with an h22 were made, pretty easy to spot a fake unless they went way out of their way to get the correct parts and I’m sure no one would do that. The euro r doesn’t cost a whole lot more than a traditional h22
Euro r must pull like crazy. I'm saving for a euro r atm. Want to pair it with a qsd h2b and gsr trans.
what wrench did you use to remove the blind nut? u said a deep 12 i think? i cant get to it
@Carlos Domenech thanks for the tip bro!
That cotter pin is a dirty bastard. I highly recommend heeding the advice in the video and getting angled needle nose. It's bloody impossible any other way. It's why I'm finishing this job tomorrow.
Took me about an hour and a half to get it off. I removed front seat for better access but damn that pin was a pain in the ass 😒
Used my fingers. Didnt realize how many issues people had till i got stuck later in the process 😂😂
I was wondering what year and model car your aem intake was for? Thought it would be worth asking since you seem to be pretty good about replying to comments. I've got a 92 coupe with an h22a I swapped in. I've tried a couple intakes as suggested by people in old threads on cb7tuner but they wont clear my abs module..
Very cool. What motor mounts did you use for the install and who did the wiring harness upgrade? What. ECU are you running? Werw both cars oroginally equipped with A.C., Cruise Control and Manual transmissions? Just picked up a. 92 Euro 2 door Accord Automatic with extremely low km.
Hi sorry my dad can’t reply right now so I’ll reply for him he used 2 hasport and 2 stock his friend did the three wire addition to the wiring harness he’s running a p72 with s300 Hondata Ecu yes they were equipped with all three I hope you get what you’re working towards
clean swaps! ive got a 95 ex sedan w sir f20b/2t4t trans w bunch of goodies on it. also working on a k24/k20head for my 91 crx si.
Brother need help how did you connect the map sensOr please help me out
SmokinMayhem1 just use the obd1 map sensor, it’s easier.
Question and probably dumb but you say the amenities to make it work. Is that from obdII to obdI
yes but more for the ego delete as well
Looks like you forgot to bench bleed the master cylinder
JaH RaH you really don’t need too. You can use a vacuum bleeder, or bleed it the old fashioned way which is what we did here, after the install.
Can you make a video or send more info on the break up grade thanks in advance !!!
Jevon Harris sure I can give it a shot. I always want to make videos when I actually doing stuff but 99% of the time I am never prepared to actually film it. Like a few weeks ago I had to replace both front wheel bearings and tie rod ends but life happens.
were both accords originally EX models? I have a 97 DX I'm trying to fit a 1in brake master cylinder but one of the brake line fittings does not fit.
Christopher Sanchez sometimes you need to cut the brake line and add an additional fitting. Did your car have a 15/16 master cylinder to begin with?
Yes it does. Did you have the same issue? I thought about having a new fitting added but I don't have the tools or the know-how to do inverted flares on brake lines.
Christopher Sanchez it’s best to have a reputable shop do it. I think the ex was plumbed the right way for some odd reason.