![Dale Christensen](/img/default-banner.jpg)
- 41
- 309 980
Dale Christensen
Registrace 25. 07. 2014
Gold Cleanup System
I got the idea for a water filter, "dewatering", system from Allan's Gold Mining channel. I welded together a vibrating deck that has 200 mesh screen and it divides the tailings from the water. It works well when you need to recirculate water.
zhlédnutí: 39
Video
2019 Polaris RZR 900 - Super ATV Deluxe Plug & Play Turn Signal Kit
zhlédnutí 1,2KPřed 2 lety
I wanted to get the On-Road registration for my RZR 900 and the Super ATV Plug & Play kit worked well for this. I like the way it plugs into the existing rear light harness and operates like an automotive turn signal.
Two RZR Trail's in a Compact Transport
zhlédnutí 412Před 2 lety
We loaded up two RZR 900 Trail's in a long bed pickup and a small trailer. It was a tight fit in the pickup but it worked okay. The only problem was that my lower doors wouldn't clear the pickup bed and I had to crawl through the side.
2019 Polaris RZR 900 Trail - Light Bar and Rear Lights
zhlédnutí 261Před 2 lety
This video shows how I installed and use a Light Bar and Rear lights on my RZR 900 Trail.
2019 Polaris RZR 900 Trail - UTV Giant Lower Doors
zhlédnutí 106Před 2 lety
I got the UTV Giant lower doors because they are a low cost lower door and they are stiffer than the factory lower doors. I was able to get most of the gap sealed with optional weather strip and it cuts down on the amount of dust in the cab.
RZR 900 at Juniper Dunes
zhlédnutí 132Před 3 lety
We each test our Polaris RZR 900 accessories on a ride at Juniper Dunes.
RZR 900 Winch
zhlédnutí 3,6KPřed 3 lety
This video shows some options for installing a winch in a Polaris RZR 900 Trail. I kept the cost down by using a Harbor Freight Badlands 3500 pound winch with a SuperATV mounting plate. www.harborfreight.com/3500-lb-atvutility-winch-61257.html?_br_psugg_q=winch www.superatv.com/polaris-rzr-900-winch-mounting-plate
RZR 900 Storage Options
zhlédnutí 1,5KPřed 3 lety
This video shows some storage options I added to my Polaris RZR 900 Trail. My goal is to be able to carry as much equipment as possible and still keep it compact. I also need the equipment to be fastened securely.
Terrane? Samples
zhlédnutí 247Před 3 lety
For Nick Zentner. This is a video of some of the samples that I found in the Northern Blue Mountains in Washington.
SE Washington Exotic Terrane?
zhlédnutí 32Před 3 lety
For Nick Zentner. This summer I found some unexpected rocks while fishing in a River East of Dayton Washington. In this video I revisit the area and observe the cobble in a couple streambeds that flow from the western hillside. It appears that this could be a small exposure of ancient exotic terrane surrounded by Columbia River Basalt.
Gold Fox Z Le Trap Trommel
zhlédnutí 4KPřed 4 lety
My brother assembled this Gold Fox Le Trap with leg kits provided by Gold Fox USA. The double sluice discharges the water at the same end as the tailings and this keeps the working area free from mud and tailings buckets.
Tusk Snow Plow Modification
zhlédnutí 407Před 4 lety
This video shows how I modified my Tusk snow plow to have a rubber edge instead of using the skid shoes. I used some rubber stall mat material that I got at a country supply store. It works well and doesn't tear up the gravel driveway like the skid shoes but it wears out after a few hours. I started with a 1.25 inch edge and I now have a 1 inch edge. The snow has melted so I'll complete the tes...
New 2019 Polaris RZR 900 EPS
zhlédnutí 3KPřed 4 lety
I was able to buy a new 2019 Polaris RZR 900 Trail. I got it without accessories because I wanted to add them myself and get to know how the RZR is made. With some accessories I couldn't find what I wanted so I custom fabricated my own.
Bucket Trommel Mining 2019
zhlédnutí 316Před 5 lety
This is some video from our club outing in June. The bucket trommel is setup with a dual sluice in a Z pattern to allow the tailings and water to discharge into the processing pond. The upper sluice is an Angus MacKirk and the lower sluice is a Le Trap. Most of the gold is caught in the upper sluice but I found out the Le Trap needs to be cleaned up after a couple hours because the material bec...
Bucket Trommel Upgrade and Test
zhlédnutí 396Před 5 lety
This Bucket Trommel upgrade should allow me to wash more pay gravel with less work on our next club outing. The lower, Le Trap, sluice is a safety sluice and a water/tailings diversion. There are no leaks so there is no mud created around this system. In the test I only found a couple, 100 mesh, specks of gold in the Le Trap sluice. I also built a backup trommel that uses the same legs, water s...
Prospecting near Sumpter, Oregon in August 2016
zhlédnutí 4,1KPřed 7 lety
Prospecting near Sumpter, Oregon in August 2016
Prospecting near Sumpter, Oregon in May 2016
zhlédnutí 2,5KPřed 7 lety
Prospecting near Sumpter, Oregon in May 2016
Fly Fishing Tucannon River Aug 14, 2016
zhlédnutí 2,4KPřed 8 lety
Fly Fishing Tucannon River Aug 14, 2016
ATV Polaris Sportsman 850 Oil in the Airbox
zhlédnutí 33KPřed 8 lety
ATV Polaris Sportsman 850 Oil in the Airbox
ATV Polaris Sportsman 850 TPS Tool and Adjustment
zhlédnutí 50KPřed 8 lety
ATV Polaris Sportsman 850 TPS Tool and Adjustment
Pretty slick!!! Thanks for sharing...
Great help thanks for video!!
Bing'O THANK YOU brother. 100% fix my prob, CZcams needs a BAT tipping button if they had one I'd be flipping you a $5'r . Happy 4th
Super impressive
My quad does not have that circuit breaker on the wire
This is for a 2011 Polaris Sportsman XP850, it might be different on a another ATV.
Hello, Are you interested in testing our products? We would like to invite you to test the Scratch-Resistant Windshield for your 2019 Polaris RZR 900 EPS
R.i.p clutch animal 🐴😂
Thanks for sharing
Just finished doing the same replacement. After completion I have no slip in my steering shaft. However when turn the power on and turn the steering nearly all the way left the EPS shakes uncontrollably, it’s fine when you turn right. Did anyone have this problem, is there a correct “centered” point that the eps box shafts to have to be at when you reconnect it to the upper and lower shafts
It's been a few years since I installed the lower steering but I think I marked the position of the shaft during the disassembly. You might need to disassemble and center the shaft.
I just did the replacement as well and have the same exact problem. I have no idea what the hell is going on. I marked the splines and reinstalled the same way it came out. I’m wondering if the unit needs recalibrating possibly? If some one knows please share.
I was able to fix mine by completely taking it apart again and making sure to tighten all of the shaft screws fully before the bolts holding the eps unit in. My hunch is one of two things happened. Either the above fixed it because the eps was slightly off alignment with the shaft and that was causing feedback, or the first time I only tested it which the ATV still on the jack, and the second time I tested it with the wheels on the ground. Hoping it was the first and I didn’t waist a lot of time.
@@Ryan-pf3qo I think I mentioned in the video that I also had an alignment problem and had to loosen everything up and get it corrected. Glad you found the problem.
Mine will not stay running after I jump start it, new battery and all some days it'll run good until I shut it off other days it dies right after i take off the battery cables
Dig it!
We're did you get the under the hood storage
I don't remember however you can still get one at Rocky Mountain ATV/MC at this address, www.rockymountainatvmc.com/parts/tusk-under-hood-storage-p
Nice video Sir. What tires are those that you are using? Would you know if they would fit my 2012 Polaris Razor XP 900?
The tires are Tusk Terrabite and they come in different sizes that would fit your wheels. I got them from Rocky Mountain ATV/MC. I like them but the treads can pick up rocks a little.
Hey I think I have same problem
Get a Yamaha I was the largest Polaris dealer in the USA they suck pure junk
Very nice. I’ve been thinking of trying something similar
Where did you get the trunk mount brackets? I have same box and just got a rzr. Part number?
I had to make the bracket myself by welding it up with steel and drilling mounting holes. This weekend I had to load and unload the box a couple times and it's easy with the bracket.
Great video! Thanks for sharing this.
My 850 seems to be bogging out and gets hot I was thinking I used bad gas and started using higher octane but same problem still what do you think could be the issue??
My 850 bogged out and died when the fuel pump was failing. You might consider checking your air filter and spark plugs first. The fuel filter is on the fuel pump assembly and if you want to clean it you should probably just replace the entire assembly. This would rule out any problems with the filter and pump. Also, if there's a leak in your fuel line it would cause the problem you have.
@@dalechristensen3433 thanks a lot! I will definitely check that! I’ll get back to you once it’s fixed and let you know.
I have this same problem and need some help. I’m getting Getting intake pop and running rough from stop to getting going. Very choppy start to get the rpm’s up to engage the clutch basically. I’ve changed the filter, oil, plugs, and put a quantum fuel pump in today. My fuel pressure is good at 58psi now but still running rough.
I have the same problem Air Filter box too much oil inside the box too Polaris ATV 2004
2500 seem to light for that machine
Hello I have ATV honda 2015 problem with power steering light is On shows PS , but Power steering doesn't work. Any suggestions please thanks
I can't help, my power steering still works okay.
Thanks for the video. I believe i need to replace my TPS and this gives me a good idea how to do it. 🤙🏼
Hello muy buen invento I would like to know if I can manufacture a machine of these and what would be the price if I manufacture it
No, I built the machine for my own use.
I have a '12 xp eps. Eps light on, relay is good. Tipped the atv over and the eps worked for a day and back to not working. Would this have any feedback on the eps motor or would the eps motor be done? Such a frustrating system. Get code 520221 "steering over current shut down"
I haven't had a problem with my eps motor so I can't help.
I have the topper unit for my high banker, I am wondering wether you have trouble with material building up under the barrel gear. I have to rinse the material out from mine on a regular basis because it gets into the teeth and makes the motor chatter like crazy. I have had a chat to Kelly about the issue but what he suggested was not the problem. Cheers Robert, Aust'
The Gold Fox is my brothers trommel and I know he needs to clean the teeth at times because of the same problem. I'll try to find out if he found a solution.
@@dalechristensen3433 Thanks for your reply. Sounds like this may be an on going issue with the gold fox trommel, but other than that they are a fantastic trommel, It does not take much to flush the area out when needed. Cheers Robert Aust'
How did you get the 50 inch razor on the bed
The pickup has an 8 foot bed and I used a tri fold ramp from the trailer to the bed. The front tires had to climb over the wheel wells. We loaded and unloaded a couple times without a problem.
What storage tray is that under the hood?
It was a Polaris part but it looks like they don't sell them now. You can find the same thing in this link, www.rockymountainatvmc.com/parts/tusk-under-hood-storage-p
Thanks Dale for god info!
Try the PVC pipe on the cutting edge hack, it holds up usually for two seasons. czcams.com/video/HwoyW4KOIik/video.html
Great job. I am currently building one with 2 gallon buckets. (Need something more portable). Could you please explain/show how you did the adjustable legs. Thanks. Lloyd.
I used PVC T's that were hollowed out with a drill bit. I then use a over sized PVC coupler over the lower end and tap threads for 1/4-20 eye bolts to lock it to the leg. I also built one with 2 gal buckets.
Thanks for the quick response. I will give it a try. Lloyd
Ok so it is my fuel pump I was confused why it would start sometime and others it would just crank
Also my clutch is bad so at this point I might just rebuild the whole thing so I don't have anymore problems things only got 71 hrs on here pretty much brand new
The posts I read said they thought that the pump was over heating or foaming the fuel. If you wait 15 minutes and it starts okay, it might be the fuel pump.
@@dalechristensen3433 idk I let it sit over night it turns but never starts it'll some what run if I keep the starting motor engaged otherwise it doesn't run at all
@@oldirtyguru7004 It doesn't sound like an ignition problem. My 850 did the same thing when the fuel pump went bad. It could be the fuel filter and that's located at the bottom of the pump.
@@dalechristensen3433 thanks I'll keep that in mind when I take mine apart
Hey man that white weep hole on top of your fuel tank what hose goes on it, I bought a used one and there's nothing on that white fitting
The white fitting, that is not part of the fuel pump, is a vent connection. I have clear plastic vent lines that all seem to terminate in the headlight pod.
@@dalechristensen3433 thanks man
So what bolts did you keep loose having same alignment issues?
The bolts on the lower mounting plate should be kept loose until the shaft bolts have been tightened.
@@dalechristensen3433 awesome thank you.
what is the transister that you are using?
I got my transformer at Radio Shack before they closed.
How many buckets did you use to build the trommel? How was the shroud put together? I noticed some spoked something on the inside of the trommel part, what are they? Also what did you use between the hopper and trommel to keep from losing material?
It takes at least 6 buckets to build. The instructions are shown on Allen's Gold Mining CZcams site czcams.com/channels/M-oIeQ9XK4Y70SNABwLcMg.html I made some changes to capture all the material and water in the sluice.
I have and made this trommal and then made some mods to it
Good Job. I just rebuilt my trommel and it needs some more mods for tumbling and water discharge.
@@dalechristensen3433 ok so I will pull it down and point them out.
@@Jaysgold My Trommel is the one that needs more work. I'll plan to post an updated video when it's done.
@@dalechristensen3433 hay Dale I made anew video and it's up. I hope this will help you your trommal looks great. You will find that it will run a lot of dirt but it's the sluice box run longer. How is con's drop set up you might not get all the gold up of your trommal until you move it and the it might end up on the ground. Let me know what you think or have questions concers or ideas I am happy to help
Wow. This is the best trommel build I've seen yet. Fantastic job.
Believe I’m starting to have the same issue on my 570 sportsman...will run fine for 20-30 mins then all of the sudden it develops a miss and it will stumble and spit and sputter. The next day it will be fine again for the same amount of time. 99% sure it’s losing pressure after warmed up. Got a pump assembly coming tomorrow, will test pressure cold then let it run for a half hour or so then test again to be sure.
It would be nice to know if the new pump solved the problem like it did for me.
@@dalechristensen3433 hopefully will find out this weekend!
Same thing happend to mine I changed the pump did not change it
@@Huntercantell576 mine ended up being broken wires going to the tps sensor. Replaced the pigtail going to that sensor and it fixed it.
This is the greatest homebuilt unit. Imgoing to build one
Nice storage. Custom stuff is nice. I am going through storage on my 900. Got my own rigs and stuff. Alway fun seeing how everybody does it.
I clicked to watch prospecting not four wheeling!
Hey where did you get those brackets for the gas cans??
I wasn't able to find the brackets I wanted so I fabricated them using steel stock.
Glad I found your video this is nice work, can appreciate all the thought and effort you put into it. Hope to build one myself. Thanks again.
After about 10 yards it's almost worn out and needs repairs. I might replace it with a Gold Fox.
It would’ve been better if u got the fox edition, since ur getting the “50” which is the 570 size. I’m getting the Trail S which is “60” it’s way more huge it’s “4” down from the 1000cc. But unfortunately the S doesn’t have the fox edition which has the screen.
The Fox Edition wasn't available when I got mine but my brother got one and it's the one to buy.
@@dalechristensen3433 Ok thanks for the reply .
This seems like it would be a bad situation if it rolled. Without the valve, the oil would just pour out.
Very cool. I went with the 50liter storage from Polaris, but have extra space on either side of it, and its ok, but not locking. So I might have to upgrade to that lower one, Ill have to check for a link, didnt see one in your description. Nice video, I have been doing the same with my 2020 50" Trail.
The trunk I replaced it with is the Kimpex Black 78 L Expedition Sport Rear UTV Trunk - 348400 and it works well. My brother got a Jemco and it fills the entire storage area www.jemcocargobox.com/
@@dalechristensen3433 Excellent, ill have to chekc that one out. Thanks!
Parabéns do Brasil..👍
Dale, your post has been up for awhile, and it is still saving butts! My problem now is the connector on the silver side. It is too loose to make good contact so I have to hold it with my finger to make a connection so the quad will start. THANK YOU for this info.
im putting i new one on mines what is the size of them strews