![Tommy Pepper’s Dirt & Diesel](/img/default-banner.jpg)
- 133
- 2 888 491
Tommy Pepper’s Dirt & Diesel
United Kingdom
Registrace 4. 11. 2013
First Drive - Engine swapped Ford 8700 - Maiden Voyage
After months of work the old girl finally drives.
zhlédnutí: 9 254
Video
Custom Chassis Rails for the Ford 8700
zhlédnutí 1,9KPřed rokem
Customising the chassis rails and the diesel tank for the Ford 8700 Engine swap
Cold start sound, alternator work and she’s almost ready for summer! Ford 8700 Genesis swap.
zhlédnutí 4,3KPřed rokem
Cold start sound, alternator work and she’s almost ready for summer! Ford 8700 Genesis swap.
Old Ford wiring is pants… here’s what I did with it.
zhlédnutí 2,5KPřed rokem
Changing the old tractor wiring harness and making a start on my own wiring replacement. Remember that this isn’t a restoration, it’s a modification!
Getting close with the Ford 8700 engine swap...
zhlédnutí 2,8KPřed rokem
Getting close with the Ford 8700 engine swap...
Why the imperial system is just BETTER!
zhlédnutí 3,5KPřed rokem
Why the imperial system is just BETTER!
SHE FINALLY RUNS! Ford 8700 comes to life with 270hp motor!
zhlédnutí 7KPřed rokem
SHE FINALLY RUNS! Ford 8700 comes to life with 270hp motor!
I keep spending MORE MONEY on this engine swap! Somebody stop me!
zhlédnutí 2KPřed rokem
I keep spending MORE MONEY on this engine swap! Somebody stop me!
A quiet night in the workshop - Ford / Genesis Engine Swap
zhlédnutí 1,9KPřed rokem
A quiet night in the workshop - Ford / Genesis Engine Swap
Engine pulley work and radiator alignment
zhlédnutí 1,6KPřed rokem
Engine pulley work and radiator alignment
My drink froze and I wore 3 hoodies - Ford 8700 Genesis swap update
zhlédnutí 2KPřed rokem
My drink froze and I wore 3 hoodies - Ford 8700 Genesis swap update
Ford Genesis swap + more custom work + Comment answers
zhlédnutí 8KPřed rokem
Ford Genesis swap more custom work Comment answers
Back on 4 wheels - Ford / Genesis engine swap
zhlédnutí 13KPřed rokem
Back on 4 wheels - Ford / Genesis engine swap
Ford Tractor/New Holland Engine Swap PROGRESS!
zhlédnutí 58KPřed rokem
Ford Tractor/New Holland Engine Swap PROGRESS!
I drilled my tractor flywheel and it broke - Ford 8700 Genesis engine swap
zhlédnutí 9KPřed 2 lety
I drilled my tractor flywheel and it broke - Ford 8700 Genesis engine swap
I rescued a CASE 1694 from death! + its a 5 CYL! Yep 5!
zhlédnutí 164KPřed 2 lety
I rescued a CASE 1694 from death! its a 5 CYL! Yep 5!
The Mow-Kart Drives again… but not for long!
zhlédnutí 1,4KPřed 2 lety
The Mow-Kart Drives again… but not for long!
Drilling the FLYWHEEL on the New Holland Genesis Engine - Ford 8700 Engine Swap
zhlédnutí 10KPřed 2 lety
Drilling the FLYWHEEL on the New Holland Genesis Engine - Ford 8700 Engine Swap
TRACTORS as far as the eye can see - Cambridge Machinery Sale
zhlédnutí 7KPřed 2 lety
TRACTORS as far as the eye can see - Cambridge Machinery Sale
Trying the Mow-Kart for the first time
zhlédnutí 1,8KPřed 2 lety
Trying the Mow-Kart for the first time
BIG FORDS, lots of Fergies & a dodgy burger van! The Newark Vintage Tractor Show
zhlédnutí 8KPřed 2 lety
BIG FORDS, lots of Fergies & a dodgy burger van! The Newark Vintage Tractor Show
3 Engines in 1 video! New Holland Genesis Engine Swap update + a surprise find!
zhlédnutí 12KPřed 2 lety
3 Engines in 1 video! New Holland Genesis Engine Swap update a surprise find!
Ford engine swap meets it’s first problem + New Parts on the beefy Genesis engine.
zhlédnutí 16KPřed 2 lety
Ford engine swap meets it’s first problem New Parts on the beefy Genesis engine.
Old Ford engine vs New Genesis BEAST! Engine swap Saturday!
zhlédnutí 54KPřed 2 lety
Old Ford engine vs New Genesis BEAST! Engine swap Saturday!
Owd Mucky gets his eye looked at - Aff Laff -EP5
zhlédnutí 1,9KPřed 2 lety
Owd Mucky gets his eye looked at - Aff Laff -EP5
The engine is out of the Ford 8700 - It’s now a bike!
zhlédnutí 4,2KPřed 2 lety
The engine is out of the Ford 8700 - It’s now a bike!
What did I just buy? Ford 8700 turns up at the farm.
zhlédnutí 9KPřed 2 lety
What did I just buy? Ford 8700 turns up at the farm.
I’m 56 collected Britains from 1975 ,, for about 20 years ,, Favourite pieces were : New Holland small square baler , bale sledge & flat 8 bale grab , on a MF 576 , all in loft , got a few new items , Class combine 770 tracks ,,, but just to expensive now unfortunately
Can you modify a cat v.8 engine to fit a standard Ford tractor? How much does the modified engine cost?
are we gonna see anymore of the 1690 working
Would be awesome to see it working hard!
4:43 Stick to tractors m8. Audis are tame compared to BMWs? Christ, ever heard of the RS6, RS7, original Quattro, the R10???
Hi lovely job does anyone know where I might find a open station platform for a ford 7700
What about the Cockshutt 580? One still exists. Or maybe the White 4-325? One of those is still around too.
I’m Harley
This is lovely.What is the song please?
Ji,case,db,doing,good,work,🧲🙋💐
Nice soundtrack
What is the gear that fits the Genesis engine from? I’m trying to get a powersteering pump to match up on my own 7.5 engine swap in an 8830
Sounds good you will gey a nice tan tedding the haylage with that beast🙂
Did you have to plumb the ports up in the radiator for the oiler cooler?
Yeah exactly that. The ports are on the wrong side of the tractor which make it a bit of a pain too
Do you run the engine oil through any cooler? , I’m putting a 7.5 genesis in my 8700 from a new holland 8340 basically a straight bolt in Just not sure if that engine needs needs running through an oil cooler on the radiator or not
Sorry I think I misunderstood your question the first time. The oil cooler ports that are in the bottom of the radiator didn’t get used, no as the water runs through a large oval oil cooler that’s on the side of the block before going into the block/pump etc so I didn’t feel the need to use the radiator based oil cooler. 40 series engine will be so much easier to put in. The oil feed and return ports should also still be in the same place should you want to use the radiator based oil cooler using the 8700 steel pipes. If it’s a non turbo engine then should definitely run cool enough I think.
Thanks for that info I’ve had to source a differnt radiator as mine was missing the radiator/air box panel and turns out it’s not that easy to get one here in Australia Its a turbo engine So I may have to run a seperate oil cooler perhaps something similar as the transmission/hydraulic cooler that’s on the front of them currently
One other possibility is to put a later NH oil cooler on (a bit like mine) which replaces your existing oil filter housing. The oil ports are the same so that is a bolt on job but the water will need to be plumbed through it. I’m not really an expert on it all but what did the original 8340 use for an oil cooler? Could try and replicate that?
The 2 wheel drive 200 plus horsepower tractor in JD colors is i think an Australian Chamberlin because they were famous for their 2 wheeldrive monster tractors with upto 360 hp i think .
Your gas
I don't know why why your even watching this shit😂😂😂
Great work. Great videos! Did you get the gear for the steering pump? We have a few here ready to bolt on if you need one. Could you put this conversion in a playlist to make easy viewing from the start?
I’m listening 👀. How much for the gear? Yes good idea with the playlist, I didn’t think of that.
Black betty
👍
Why? There are so many good diesel engines out there.
In the states it probably is known as a dog engine but in the UK, it’s a novelty. Nothing in the UK sounds as good as those crappy GM diesels
Put the flathead in a Dexta or a 25 D or something like that 😂
That would be fun. She’s seized solid, would take some ££ in new parts as the dizzy and carb and other bits are just too far gone 😞
I did this same conversion on my 8700 here in Australia I used a motor from a 8340 Already had 6 bolt crank Power steering pump bolts straight on And the sump didn’t need swapping as it was already a cast one
Yeah a 40 series engine is externally as close to the 401 as possible, it would slip right in. The 675, other than bell housing bolts and block length is set up very differently. Pretty much nothing else matches. 277hp though so it’s going to have a lot of variation
Looks like a bunch of photo shopped BS
YES....before Ertl sold out to TOMY over-priced MADE IN CHINA junk!!
What’s going on with your David brown fleet at the moment?
Get it on the Dyno bro im guessin around 200bhp??
Nice old brown 😊
That thing will do the trip no problem. Check the oil every few hours
these massey ferguson series were not imported to my country, but a patented series was produced as the 285 and 265 series. unfortunately, they were produced at a very low level as hardware. the 285 version has a 75-horsepower perkins engine. It has only one hydraulic valve, and this 3-point hitch dependent running,so you can not use 3 point hitch and hyraulic valve same time which is what I dislike most about the 265 and 285 versions produced with the massey ferguson patent in my country. Apart from that, there are a lot of people who love these tractors, which have been produced since the 1980s, and they are still very popular where I live. because everything is mechanical, and even if the malfunction is a very small problem, you can solve the problem yourself. At last i from turkey :D
Gold
More please.👍
Ha, that's spooky. I was just thinking last week its been ages since you put anything on CZcams and this pops up today - the day I'm at the Cambridge Tractor Auction. Would be good to see how you get on with your Mustang restoration if you have time to film any of it.
David Brown all the way .
Nice tractor! Good job restoring it proper
Be better if it had a Q cab🚜
Massey. Simple and reliable utility tractors (the older ones atleast).
This is a 1942 universal carrier mk1. This particular carrier is fitted with a 100hp engine which was professionally rebuilt in 2016, the engine puts out more than 100hp now.
David Brown, still run a 1490
Zetor
A 1/2 bolt is a bee's dick bigger than m12 bolt and m13 is an odd size.
😊
Well done on your achievements , pity about the fuel problems but once you sort it I would run her on white fuel as Red is monkey business and certainly won’t run as well ax on White 👍
The Caterpillar with Claas livery was for sale in europe they had a cooperation
another great video
🌺 *promo sm*
Great work well done, it's well worth the effort. Check out two similar converted Fords at Cathedral Mountain Railway on CZcams. First video " Haymaking 2022 with classic Ford Tractors, Part 1 mowing, tedding and rowing up ". Second video, " Part 2 Baling, Tedding and loading small haybales." Our TW15 has a NH TX 66 combine engine fitted whilst out 8100 has a NH 8970 tractor engine fitted. They have been running faultlessly now for over 27 years since their engine swaps. These conversions are the best tractors that Ford never made.
Sounds good
Sounds good.i think your gunna need 2 more wheels for the back and weights on the front.
Hi Do you need some great lighting for your car to help you better driving, off-road? We're the pro auto lighting company for nearly 20 year and we're looking for sponsorship!