- 56
- 85 841
Pang-Wangling
Registrace 3. 12. 2009
Vortech YSi Supercharged Foxbody Mustang 900+ HP Dyno Results - 7000 RPM 363 8.2 Deck Windsor !!
Took the Fox Mustang to the dyno to see how the bigger Vortech YSi blower does compared to the previous Ti dyno numbers. Fully happy with the results.
All dyno numbers are SAE, smoothing 5 and ran on a DynoJet chassis dyno.
This run was on 18" wheels with Nitto 275/35/18 NT01 tires. Previous dyno runs were on 255/60/15 MT ET Street R drag radials.
All dyno numbers are SAE, smoothing 5 and ran on a DynoJet chassis dyno.
This run was on 18" wheels with Nitto 275/35/18 NT01 tires. Previous dyno runs were on 255/60/15 MT ET Street R drag radials.
zhlédnutí: 2 814
Video
Follow-up Answers About My Vortech Boosted Foxbody Mustang - Dyno Predictions - Holley TermX Datalog
zhlédnutí 3,3KPřed 2 měsíci
I try to cover some of the questions brought up in the overview video of this car including showing the 18" rear wheels, the previous dyno session at DynotuneMP (Mike Post), and a Holley EFI datalog comparison explaining why I think this car will make 900rwhp. I also talk about the front splitter which I LOVE on this car. Sorry for the long explaination during the data log comparison. This car ...
Quick Look - 1992 Foxbody Mustang GT with Vortech Supercharged 363
zhlédnutí 24KPřed 2 měsíci
This is a quick overview of my 92 Mustang GT as of June 2024. The car has a Vortech YSi supercharger and a 363" 8.2 deck sbf stroker.
Kona Wozo - Playing with the Drone
zhlédnutí 61Před 2 lety
Just playing with the drone. Footage from DJI Mavic Air dropped into the GoPro Quick software.
Autobahn Country Club South Last Session 5 27 2022
zhlédnutí 63Před 2 lety
Wet/water/little river at turns 11 and 14. 2004 C5 Corvette ZO6. Continental Extreme Contact Force tires.
C5 ZO6 @ Autobahn Country Club South 5/27/2022
zhlédnutí 81Před 2 lety
SCCA Track night at Autobahn CC Wet/water/little river at turns 11 and 14.
Last Open Lapping Session at NCM with Binge Tokyo 11/6/2021
zhlédnutí 42Před 2 lety
Last Open Lapping Session at NCM with Binge Tokyo 11/6/2021
Lapping NCM with Binge Tokyo 11/6/2021
zhlédnutí 35Před 2 lety
Thanks to the little red Mini for showin gme the track! This is my first time at NCM and I'm still getting a handle on this car but it was a fantastic day.
Little Switz with Tyler and the girls
zhlédnutí 158Před 3 lety
Little Switzerland in Wisconsin - Just a few trails here; Jammer, Mainline, Easy Street, etc.
I missed her fall - Snowshoe Skyline Trail 2021
zhlédnutí 106Před 3 lety
A quick family ride down Skyline at Snowshoe. I'm riding a Commencal Meta Power 29. My poor girl who took a spill is on a old but great value DiamondBack Clutch. What a trooper she is for finishing the run with no complaints after her crash. The boy who I follow down the top half of Skyline is riding a YT Capra. This is the first year I can say he is honestly jumping things and enjoying it. I c...
Snowshoe Bike Park Dirt Beaver Trail 2021
zhlédnutí 59Před 3 lety
We rode Snowshoe Bike Park again this year, 2021, and they have finished off the new Dirt Beaver Trail. Last year only the top portion was complete and open while we were there. Forgive my sloppy slow riding. This is aboard a 29" YT Tues downhill bike.
Snowshoe Skiing Christamas 2020
zhlédnutí 38Před 3 lety
A few easy green runs with the family at Snowshoe mountain resort - Christmas 2020
A little dirt biking and side by side SxS riding at the Hatfield McCoy trails in West Virginia
zhlédnutí 27Před 3 lety
A little dirt biking and side by side SxS riding at the Hatfield McCoy trails in West Virginia
Burt how long can he go
zhlédnutí 444Před 3 lety
Yes - You are watching a dog pee. Has life got this bad? It must have. Maybe it's a COVID issue that brought you here or maybe someone sent you a link to look a dog butt. I don't really know how you got here only that you should consider doing something more with your life if this is the stuff you are watching here on CZcams. Or I could be missing out on the next big thing and I should be posti...
Twin Turbo Big Block Ford Bliss - Crank the sound up!
zhlédnutí 592Před 4 lety
Twin Turbo Big Block Ford Bliss - Crank the sound up!
Ken's Blue Beast US41 6-19-20 First Pass
zhlédnutí 63Před 4 lety
Ken's Blue Beast US41 6-19-20 First Pass
Which Enduro MTB Helmet? Fox, Bell, 100%...?
zhlédnutí 6KPřed 5 lety
Which Enduro MTB Helmet? Fox, Bell, 100%...?
Little Switzerland Bike Park hitting the BIG jumps today - 8/25/2019
zhlédnutí 2KPřed 5 lety
Little Switzerland Bike Park hitting the BIG jumps today - 8/25/2019
LT1 Camaro with twins makes an easy pass at RT66
zhlédnutí 11KPřed 5 lety
LT1 Camaro with twins makes an easy pass at RT66
Snowshoe Bike Park with my Boy - Aug 2019
zhlédnutí 61Před 5 lety
Snowshoe Bike Park with my Boy - Aug 2019
Son and Father Race at Snowshoe Bike Park
zhlédnutí 30Před 5 lety
Son and Father Race at Snowshoe Bike Park
Massanutten Resort Bike Park with the Family
zhlédnutí 534Před 5 lety
Massanutten Resort Bike Park with the Family
Broken Auto-off feature on the Bose 700 noise cancelling headphones
zhlédnutí 820Před 5 lety
Broken Auto-off feature on the Bose 700 noise cancelling headphones
Hey man, that Foxbody looks sick! I'm planning on doing something similar with mine. What fuel system are you using to support the 363 and the YSI? Also, what fuel pump are you running? Thanks!
Any track vids?
Not yet. It's not quite up to NHRA safety standards. 😂
Awesome car! I have a very similar setup. You on Face book? How can I contact you?
Thanks! I'm not on FB, just YT really. Feel free to ask any questions here and I'll try to answer them.
Thank you for keeping your tail lights true to the GT.
Is there anyway I could get in contact with you, I have a few questions about your build
Feel free to ask here. I try to answer questions for everyone.
Great numbers! Very nice build.
You're in Illinois? Why have I not seen this car yet? Sounds great and that YSi was a nice addition!
I love how the fat tires in the back look
Man I’ve been going back and forth for months on whether I wanted to do a coyote swap or a 363 build, and this setup is really the setup I’ve been looking for and it seems like you did it right … your car makes me real excited to do my 363 build and give me the hope for a sweet outcome .. Thanks for sharing !!
Nice car! what wheels are those? I'm still 4 lug also!
Bogart
🔥🔥🔥🔥🔥
I love the car it's off the chart awesome Ford power forever baby a real Chevy and dodge killer l love it keep on bringing it
ATI Super Pulley.....🤔
Only really works on Procharges because they use a larger pulley which allows the sprag to be assembled into the hub. The typically smaller Vortech pullies don't have enough room for the sprag.
@@TroyCarterPhoto yeah I wasn't sure if it was adaptable to Vortech blowers.
@@arturozarate1752 I wish it was.
SICK CAR BUD!👍
Thanks! 👍
Great #s!!! Still curious ad to your clutch, trans , engine mngmt and rear axle set up I have a 347 that Im upgrading.to a YSI trim from an s trim.
I'm gunna need the same clutch and trans here soon.
This is a TKX trans, Centerforce II pressure plate, Centerforce DFX disc, and Fidanza aluminum flywheel. Nothing special, just simple stuff that works.
@@TroyCarterPhoto Thanks for the reply and sharing. It really helps the fox body community and is greatly appreciated!
@@TroyCarterPhoto wow!! Simple but effective..Thought I needed to go Tremec Magnum 6 speed..Im also a 4 lug soldier with moser 4 lug 28 spline axles..Think thats enough?? And your engine mangmt? EEC or Terminator X?
@vernondavis2207 Moser 28's are stronger than stock, call it 20-30%. That being enough depends on what you do with the car. As a street car on regular tires it's plenty. On a big radial on a prepped track with a little tire shake...who knows. I have Moser 31spline and know it's not something you want to abuse too hard.
Do you have a build list for the motor? Great looking car. I'm hoping to build my new motor soon and always looking for different ideas.
It's this longblock with rings gapped for boost. performanceparts.ford.com/part/M-6007-Z2363RT
Hello, Hope you don’t mind me asking but what wheels are those? Size and offset? They are awesome! Never seen those in a 4 lug before. Thanks in advance.
These are Bogart wheels - 18x8 and 18x9.5 - will need to look up backspacing but it's typical foxbody spacing. I also have 15x10 rears you can see in a different video.
@@TroyCarterPhoto Thanks for the reply. I did watch your other videos and got the info. Nice ride and keep up the good content. Thanks again!
That’s a beautiful build sir
Who built the shortblock are you on e85?
This is a Ford longblock but I have had it apart and made small updates for boost. performanceparts.ford.com/part/M-6007-Z2363RT
Yes, pump e85.
@@TroyCarterPhoto Nice numbers. You didn't ever have a Red Convertible did you? Maybe a Yellow Lab. I know I've met you before at one of the car shows in the nw burbs.
@ford9050 No red convertible but I had a yellow lab in the 2000's that went everywhere with me.
@@TroyCarterPhoto Yes. I remember talking with you a bunch of times. Just don't remember which places..lol Kirchoff in RM or Schaumburg, Photo's?
That's a really nice build how's the driveabity on something like this? Could you trust it on a long cruise?
It drives really well but that is very subjective. I would trust it for pretty much any cruise and have been putting about 2500 miles/year on it. Most of that is going to cruise nights, etc. that are 15-60 minutes away.
Beautiful build. Would you be interested in selling it?
Sorry no. I'm planning to have it a long time.
Not sure how I missed yer other vids.. But.. Sik build !! looks like a super fun street car. A boost brace / crank brace is the only thing that stopped belt slip on our old Renegade setup. Bob Kurgan used to sell them. Prolly plenty others out there now. Or make yer own. Dont think that would be the best option for full time street car stuff but. Maybe on track days. That ana Methanol sprayer ;)
I think they call that a Mitchell brace? I considered that but it's one more thing to mess with and I don't have a rule set like renegade does so I can use 10-rib belts and if I really like move to cog belts for track use. Not sure any of that matters right now, I have more than it really needs😊
Sick car bro sounds like mine . If you don’t mind me asking what’s the brand of your wheels ?
Bogart
@@TroyCarterPhoto they look perfect on the car
Wow that’s amazing great job super clean build currently wrapping up a dart 363 with a vortech Ti trim that’s more then enough for a fox body
What cam and exhaust setup?
@Metlupass2 It's the cam that is included with the longblock. Basically a 232/240 cam similiar to a CompCams XE282hr. Exhaust is basic BBK longtubes, X pipe and Hooker cat back.
That's a very linear graph Troy, good job with the solenoid tuning.
Impressive. Are you going to take it to the track to see what it will run? Should be fast but the tkx won’t last long. I went to a t56 magnum from a tkx on my fox with 100 less then you have.
@GAGEDADY I will take it to the track. Although I 100% admit it's a cruiser, dyno queen, more than a track car. I'd be happy with pretty much anything in the 9.xx range and there's no reason it shouldn't do that if I just get a clean-ish pass. The TKX - we'll see what happens there. I'm very nice to it so I hope it lasts a while.
Did your tkx break or did you just assume it couldn't take the power because it's "rated" for 600 tq?
Goddd this is beautiful and nice set up!!
I'll guess 934 to the wheels.
I want to see a fox Granada with mustang cobra underpinnings.
What exhaust are you running?
BBK LT's, X Pipe, vr304 mufflers, all 3" to the tail pipes.
@@TroyCarterPhoto beautiful build!
The memories listening to this car. I had a V2-S trim with a ice system!!! I was hell on the streets. When they got tired of blowing up their DSS crate motor’s, they stole my car and chopped it 🆙 nice ride.
Nice setup, what cam are you running?
It came with the engine. performanceparts.ford.com/part/M-6007-Z2363RT
Where did you find those rims??
Bogart.
I must have missed it but what mufflers did you chose?
www.holley.com/products/exhaust/mufflers/absorption_glass_pack_mufflers/vr304/parts/21670HKR
@@TroyCarterPhoto love the build!
Needs an LS …. And 4 lug? Really?
Well done 🇺🇸
I'm curious. Do you know where this car is originally from? I had a 92 GT too, black on black. Yeah... I miss it 😢
Michigan but it had grey interior.
I would get a set of Trickflow valve covers or take and weld some AN nipples on yours and put a motion raceworks breather on the setup. I have similar setup and with that much boost that poor breather might start letting oil get on the motor. The setup they sell is top notch and No more problems with boost for me. Also, intake temps are a huge problem for me in my area so Meth injection works on WOT but put an intercooler on that car and watch it change into another animal 24/7 unless he weather doesn't get that hot in your area but here at 105 my car would pull so much timing because the votech was just throwing hot air right into my systemax intake lol love the car. My new build I went gen3 coyote with a 10r80 and soon all go gen5 whipple and it transforms the foxbody into another car. Idles perfect no more surging or problems its just like a new mustang but a foxbody and with the 10r80 its rips with just bolt ons and lund tune.
This vehicle is beautiful man!!!❤
Amazing ride
Clean build🎉
Boss/Dart is the only way. I’m glad you didn’t slap heads and a striker on a stock block. Nice work!
Love the wheels man. Love how unique they are.
Im a simple man. I saw a foxbody on the thumbnail, I hit subscribe
We can tell it’s black dude.. really nice car.
Ina world where it’s “coupe this coupe that” it’s refreshing to see a clean GT build
that thing is beautiful!
Nice car
One of the cleanest foxes out there!!