- 89
- 1 149 917
Cloakfiend
Registrace 3. 02. 2007
Creative Genius
8K VS 4K PHONE SCAN RESULTS
Just thought I'd try 8K out and see if it was good enough, but I feel that phone cameras 8K is just too poor at the moment as it lacks fine details compared to 4K, however downsampling it seems to add more detail than 4K alone holds? 4K on its own is pretty good tbh but it does appear that downsampling 8K works a treat. And its isnt much more of a chore if you just half the size straight after shooting completely omitting having to deal with the 8K footage itself, mind you id prefer to examine the 8K shots first just in case. The model was made using the Zephr 6 8K data. All faces shot on The Galaxy S21 Ultra.
zhlédnutí: 595
Video
FACE SCANNING WITH YOUR PHONE STEP-BY-STEP WORKFLOW
zhlédnutí 9KPřed rokem
Hi, Here is my entire process from start to finish using some videos sent to me by a subscriber, I cut out some boring bits but also left in plenty as I just hate editing anything over 20m mins so apologies if there are some bad cuts and coughing and burping and stuff like that. I'll make more of these so if you still aren't sure don't worry. I also forgot to do the little round dots in the eye...
HEAD SCANNING WITH YOUR PHONE
zhlédnutí 189KPřed rokem
I got a lot of requests for this! So here is a very quick introduction to photogrammetry and a rough tutorial to get you started doing decent head scanning. You'll need a phone and some 3D modelling software. Sorry Mac users this ones a free one for PC only. I'll do an Agisoft one for Mac later as Zephyr Free isn't available for Macs. I'll do more tutorials soon!!! Cameras used: Canon EOS 5D Mk...
Dual Colour Resin Print Tests (Resin Marbling)
zhlédnutí 941Před 2 lety
Just a bit of fun, because why not. I had so much small tests from my thermochromic resin experiments that I wondered what would happen if I mixed them up! I also wanted to try out vat swapping. You can also add colours mid print for funky results!
THERMOCHROMIC RESIN PRINTING ROUND UP
zhlédnutí 882Před 2 lety
Just a few colours and bits of info I thought Id like to share regarding my thermochromic resin tests. All pigments act differently but I found the black to fade the quickest, but there are many brands to try, I only tried a few, but they did all work.
PHOTOCHROMIC RESIN 3D PRINTS
zhlédnutí 449Před 2 lety
Hi all, Just a fun quick video about an experiment I made with photochromic powder mixed into white and transparent resin. Came out interesting. Great for art!
DIY THERMOCHROMIC PRINTING RESIN UPDATE
zhlédnutí 484Před 2 lety
Hi again!! Just a quick update to highlight the factors concerned with making your own thermochromic resin to print with. Strength, change times and, a few suggestions...
THERMOCHROMIC RESIN 3D PRINTING
zhlédnutí 2,4KPřed 2 lety
Just a fun little video I thought I'd post showing success at my DIY Thermochromic print resin experiments. Printed at the same settings as all usual resin. Super fun!!! The 3D models are also made by me. Culture Hustle did not sponsor this video btw! lol.
Alclad Chrome Lexan Paint N Buff test
zhlédnutí 2,2KPřed 2 lety
I usually have only painted tiny models and parts to test Alclad but I thought Id try a larger object. Unfortunately the airbrush have had a small nozzle and thicker even coats are harder to do. i did the best I could. Alclad Black Gloss just takes too damn long to harden if ever so real polishing is out of the question but finger marks can be nicely buffed out with cotton pads or covid masks! ...
Masking And Painting Resin Prints (Alclad Chrome Lexan)
zhlédnutí 624Před 2 lety
A video showing the process I took to paint my friends Terminator bust. It was my first time using liquid latex and Alclad black gloss base. The red glass paint was Pebeo Vitrail crimson. Hope you enjoyed the vid!
Adding Weight And Sealing Resin Prints
zhlédnutí 1,6KPřed 2 lety
Don't use to much resin!! unless you love sanding! also don't take big bottles of resin indoors just pour a tiny bit into a tiny bottle or something. I left all the hassle and mistakes in this video to show it doesn't always go to plan!! btw, 4 inca plane stls free at 2000 subs!
SECRET ANCIENT ALIEN ARTIFACTS
zhlédnutí 1,2KPřed 2 lety
Here are my models of ancient Colombian Artifacts. In this vid I show you the solution that I use to get these results! If I get to 2000 subs I'll release the stls free!!! hope you enjoy the video!
Electroplated FDM vs RESIN
zhlédnutí 1,1KPřed 2 lety
Just a quick video to compare FDM plated prints vs resin ones. The main difference is fine detail and the fact PLA floats so is harder to plate. but ill go into non plated comparisons later. this is about the surface quality which in my opinion can be equally good.
My 3D Printed Dog Urn
zhlédnutí 684Před 3 lety
Just made this dog urn for a friend a while ago and though I would share some of my tips. originally it wasn't going to be an urn but thats the beauty of progression when you do things yourself!
ELEGOO MARS 2 PRO VS MARS PRO EXPERIENCE
zhlédnutí 17KPřed 3 lety
ELEGOO MARS 2 PRO VS MARS PRO EXPERIENCE
ELEGOO MARS PRO GRID ARRAY POOR PERFORMANCE UPDATE 2
zhlédnutí 1,9KPřed 3 lety
ELEGOO MARS PRO GRID ARRAY POOR PERFORMANCE UPDATE 2
Elegoo Mars Pro Grid Lines, Hot, Spots and Potential Fixes Catchup
zhlédnutí 1,7KPřed 4 lety
Elegoo Mars Pro Grid Lines, Hot, Spots and Potential Fixes Catchup
ELEGOO MARS PRO GRID LINES LENS ARRAY HACK
zhlédnutí 6KPřed 4 lety
ELEGOO MARS PRO GRID LINES LENS ARRAY HACK
CHROME FEST PT.1 ALCLAD, MOLOTOW, MIRROR (CHROME PAINT COMPARISONS ON MINATURES)
zhlédnutí 18KPřed 4 lety
CHROME FEST PT.1 ALCLAD, MOLOTOW, MIRROR (CHROME PAINT COMPARISONS ON MINATURES)
SPOTTING A BAD FEP! LISTEN TO THE SOUND! MARS PRO
zhlédnutí 21KPřed 4 lety
SPOTTING A BAD FEP! LISTEN TO THE SOUND! MARS PRO
FIXING THE MARS PRO VERTICAL LINES PROBLEM (DIFFUSING ELEGOO)
zhlédnutí 6KPřed 4 lety
FIXING THE MARS PRO VERTICAL LINES PROBLEM (DIFFUSING ELEGOO)
PEEL FORCES ON RESIN PRINTERS ILLUSTRATED
zhlédnutí 12KPřed 4 lety
PEEL FORCES ON RESIN PRINTERS ILLUSTRATED
CHROME IN A BOTTLE ON 3D PRINTS AND MINATURES
zhlédnutí 15KPřed 4 lety
CHROME IN A BOTTLE ON 3D PRINTS AND MINATURES
LARGE RESIN PRINTING ISSUES PT2 - VERTICAL LINES
zhlédnutí 11KPřed 4 lety
LARGE RESIN PRINTING ISSUES PT2 - VERTICAL LINES
CLEANING FEP WITH ACETONE EXPERIMENT ( RESIN PRINTERS )
zhlédnutí 4,1KPřed 4 lety
CLEANING FEP WITH ACETONE EXPERIMENT ( RESIN PRINTERS )
PLA PHA ACETONE SHRINK TEST DESTRUCTION
zhlédnutí 331Před 4 lety
PLA PHA ACETONE SHRINK TEST DESTRUCTION
THE WHITEST WHITE PAINT AND EL PAINT TEST
zhlédnutí 1,3KPřed 4 lety
THE WHITEST WHITE PAINT AND EL PAINT TEST
If you look at the manufacturers spec sheets for FEP you will see that it is resistant up to 93C, ( yes it is pressurised to get there, BP is 53C).
Sorry I didn’t understand how did you end up making it work ? ( how do you usually avoid pigmentation, if you dont mind me asking)
rất tuyệt vời.
Can i doit with my Rog phone?
You make 3d model to buy?
Wath kind of 3d modeling recomend or movile app
@@sergiozabala6081 get zbrush.
@@Cloakfiend okey and for the 360 video haw can i take the frames?
@@sergiozabala6081 any cixeo editing program should be ok. I use.adobe after effects. I made another tutorial about this though already. A long one.
Its a video or pictures?
can i know what printer and material you use for printing those heads ?
Sunlu grey resin on a tuned mars2pro. About 3.5hrs each.
Methylene chloride is a known carcinogen
Awesome! What resin did you use?
Just generic sunlu, white mixed with thermochromic pigment! Prints like normal.
@@Cloakfiend do you have a mix ratio? How much do you mix into the resin vat
@@metadr0n13 just keep adding until you are happy you dont need tons,just enough to reach the base colour its meant to look like. Addong too much isnt the end of the world, might weaken the resin a bit but thats it. I made a video about it on my channel!
@@Cloakfiend I’ll check it out thanks for the tips 🙏
hi what software is this
Great video, but you seem a little flustered throughout the beginning of the video which was a bit distracting with all heavy breathing and the fidgety, shakey hands. Just relax, you got this 😊
Cheers, yes I know. I just wanted to do it and i tend to speak right by my camera which picks up all my mouth noises of heavy breathing and tutting etc. Im more aware of this now. Ive had loads of people commenting on it! Lol.
@@Cloakfiend still a wonderful video! Keep up the good work, mate
good video .thanks a bundle 😁
Did you have to thin the "Mirror" paint before spraying?
si you have other recommendations? it’s the best video ever about this topic, straight to the point, you deserve heaven, money and joy
What kind of 3d printer was used to print these heads ?
looks like a resin printer.
Do the pictures have to be in order?
Yes they do
Any chance you could try again but do tiny tiny tiny little hexagons? I'm trying to design a suit for a 1/6th scale spider-man figure and wondering if this woud be a good solution for the suit texture.
Yeah you could but the smaller the hexagons will just take longer with all the lifts. I was going to do a scarf.
I tried doing the two colors in my printer. And my printer just ended up mixing the colors up. Do you have it at a low speed setting?
sometimes its best to just put another coat of gloss over the whoel thing, a nice wet coat and let it cure
Hey, just curious, why do video and extract frames, instead of taking photos?
Pro tip: mix up some regular resin like smooth-on, pour it in the hollow print and then roto-cast it by hand. Do a little bit at a time. This will help cure whatever resin residue left. Do this a couple of times. Let it set for a few hours until it’s fully cured. THEN use plaster to fill it up. Your welcome.
Now i would just cut a large piece out and cure it properly. This works well on fdm, but the whole uncured resin in cavities makes it a nono for resin.
That's great! 🔥🔥🔥
what software you're using for scan build?
Came here after my first print. Going to swap this out for a Fresnel lens printer. See if it's any better.
Single light source is best
I had the same problem, very annoying. Fixed it with a lift speed decreasing.The print is little bit slower but the result is great.
Very nice demo. How did you print out the images, what kind of printer did you use?
I use an elegoo mars2pro
Nice!
Thanks
That’s impressive. Thanks for the content.
Thanks, much appreciated!
Это ЖЩЦЧ какой то)
Nice but I prefer Meshroom. Stick to the defaults and there's nothing else to do except deleting a few unwanted faces afterwards.
Very insightful! Thnaks a lot !
what air brush did you use
An iwata airbrush. Hp-bs .5mm nozzle.
Didnt work guess the pla material isn't the same
It might help if you followed the instructions. It is meant to be BRUSHED on VERY thinly, almost as a dry brush. Less is more. The thinner the coat, the better the gloss. It also says specifically it should not be sprayed.
How did you get enough images of pierce morgan to create a 3d model? Cant imagine u doin a 360 on him 😂
I tried and tried but failed miserably. The results were so bad I could not 3d print. I was hoping that by now this technology would have progressed but sadly it is still in tge primite stages
Its all about looking out fot the best lighting conditions. And masking. Ill post more tutorials. Having done it so many times ive learnt what works or not, but even i have to do it twice sometimes!
This is incredible!! You stumbled on how to make your prints look injection molded. I might just mod my Saturn to do this.
Great video. With all the AI and Lidar and Apps available today, this method while very time consuming, appear to be giving the best results. I hope it works to objects too I'm going to try it on an antique violin that I need to scan.
Yes you can, but the resolution in zephyr is not as good for objects. There is no ultra mode, only for human body im Afraid. But give it a try by all means.
we just see nothing of this repair tips! it s useless content
also- for 3d printing are you using a fillament or resin? I'm interested in doing figures of photos
All these are resin but i have used filament in the past.
Could you do a video of a full body scan? Also, if the person that is being scanned lives in another country- do you provide them with instructions on how they need to do the pictures?
it could also mean u need lube on ur rails
AMAZING!
Nice work I’m trying to learn to do it. I got many people asking to make they dead ones.
Nice results, I’m just getting into electroforming i hope to get the same finish as you one day
I also electroformed some smaller items. Im going to do an electroforming tutorial eventually if i can recover from my annioying long covid. Spraying the conductive coating is in my opiinion essential for a smooth finish.
@@Cloakfiendyeah I’ve got a airbrush and copper conductive paint but getting a nice even coating is tricky without blocking the nozzle. or being too thin that you need lots of coats of paint😢
@@spongeknock7387 its very easy when you know how!!! But yes you cant lay it on too thin with some paint. Good graphite sprays have unfortunately tripled in price since this electric revolution. It sucks as i now pay way more when it was pretty cheap before.
Hi, what filament have you used in the girl head at the end of your tutorial?
It's all resin. I mixed some florescent pink pigment Into the resin. It's from stuart semple if you want to try, he has loads of weird pigments.
What kind of 3D Printing machine do you have
@@Cloakfiend thank you for the video , Ihave questions : -how many hours did it take you to print the head with this printer? - Haven't you found another alternative to accomplish this task with another means, AI, LIdar,....?
Your video shows the BASICS, but you should have shown HOW you clean up areas of the model. Just showing Before and AFTER does absolutely NOTHING...
I have another 2hr long video that shows everything in some level of detail. The hair the eyes, and everything.